The introduction of the roller support, the advantages and functions of the roller support

The high-quality roller support device is not only convenient for replacing the roller, but also involves a deflectable roller support, bearing, pin, body, roller, limit block and fasteners. The lower end of the bearing is connected with the upper end of the fuselage with fasteners, and the bearing is connected with the deflectable roller support with a pin shaft, and the idler is provided with the deflectable roller support. On the deflectable roller support, be provided with the clamping groove for rotating around the pin shaft, and the roller is arranged in the clamping groove of the deflectable roller support, and be provided with the limiting block that controls the deflection angle on the deflectable roller support.

Hello, glad to answer for you, B1400 grooved idler bracket standard size. There are many specifications of scaffolding steel pipes, which can be divided into following according to their diameters

There are also a variety of lengths: 1 to 6 meters and a half meters each; It can be processed according to customer specifications. The thickness is generally millimeters, and the diameter is 48 mm.

The surface is generally not treated, and individual anti-rust paint is applied. The material of the scaffolding steel pipe is: Q195, Q215 or Q235.

The scaffolding steel pipe implementation standards are: SY T5768-95 and GB T3091-2001. The weight of the national standard shelf pipe per meter is tons, and the actual weight of the whole tube:

The length of the steel pipe. Different types of engineering construction use scaffolding and formwork support. At present, most of the bridge support frames use bowl buckle scaffolding, and there are also those who use portal foot scaffolding.

The main structure construction of the ground scaffold uses fastener scaffold town cavity frame mostly, and the longitudinal distance of the scaffold pole is generally; The horizontal distance is generally.

1. The self-aligning roller bracket in the row has strong support strength, high flexibility, low friction and long life.

2. The radial runout of the self-aligning support; flexibility; Axial channeling momentum.

3. It is equipped with five key points: dustproof, waterproof, axial bearing, impact resistance and service life.

4. It is installed on both sides of the conveyor belt to prevent the conveyor belt from deviating. It effectively makes the belt run smoothly and reliably.

5. The self-aligning effect is remarkable, and the structure is simple, which can be fully cultivated to meet the needs of modern operation development.

Idler is an important part of the belt conveyor, with many types and large quantities. It accounts for 35% of the total cost of a belt bending conveyor, and the resistance of the production is more than 70%, because the quality of this roller is particularly important.

The function of the idler roller is to support the conveyor belt and the weight of the material. The roller must be flexible and reliable. Reducing the friction between the belt and the idler plays a key role in the life of the belt, which accounts for more than 25% of the total conveyor cost.

Although the idler is a small component in a belt conveyor and the structure is not complicated, it is not an easy task to manufacture a high-quality idler.

The criteria for judging the quality of the roller are as follows: radial runout of the roller; roller flexibility; Axial channeling momentum.

During use, attention should be paid to adjusting the roller support, which can effectively prevent the tape from mistracking. In this way, it will not cause spillage, abnormal wear and damage to the equipment, reduce productivity, and affect the normal operation of the whole equipment.

Shenyang Jieai Xi Conveying Equipment Co., Ltd., a joint venture between JRC and China in 2000, is located in Shenyang Economic and Technological Development Zone, with a total investment of 10 million US dollars, an annual output of 700,000 rollers, and the only fully automatic roller production line in China.

Advantages and functions of roller bracket products ZMJT15

1. The roller support has strong support, high flexibility, low friction and long life.

2. The radial runout of the self-aligning roller support; Spiritual finger clan occupancy; Axial channeling momentum spike rot.

3. The self-aligning roller bracket has five key points: dustproof, waterproof, axial load, impact resistance and service life.

4. It is installed on both sides of the conveyor belt to prevent the conveyor belt from deviating. It effectively makes the belt run smoothly and reliably.

5. The self-alignment effect is remarkable, and the structure is simple, which can fully meet the needs of modern operation development.