Can you brush another layer of ordinary interior wall paint after the acrylic waterproof paint is dr

Acrylic waterproof coating is a one-component water-emulsion waterproof coating prepared by adding other additives with pure acrylic polymer emulsion as the base material. The waterproof film formed by the waterproof coating after curing has certain extensibility, elastic-plasticity, crack resistance, impermeability and weather resistance, which can play a role in waterproofing, seepage prevention and protection. The waterproof coating has good temperature adaptability, easy to operate, and easy to repair and maintain.

If you want to know more about it, you can consult Suzuka composite building materials, product service: our company integrates product development, production, sales and service, and provides professional solutions for different product systems. The core products include, coatings (real stone paint, colorful impression stone, art stone, texture coating, etc.); Mortar (modeling mortar, carving mortar, waterproof mortar, facing mortar, etc.).

Welcome to consult! Thank you!

After waterproofing, you need to brush putty, brush the primer to make a base, and then brush the topcoat, otherwise it will affect the adhesion and service life of the topcoat. Chenguang interior wall latex paint is water-based and environmentally friendly, moisture-proof and mildew-proof, dirt-resistant and stain-resistant. Some people are troublesome and may brush the waterproof putty directly, so that the waterproof coating and putty are combined to save trouble and effort.

If your waterproof paint has already been brushed, you can scrape the putty directly.

Try it in small batches first, as you are not sure if the two coatings will be compatible.

Hello dear! We'll be happy to answer for you. Generally, the acrylic waterproof brush exterior wall can last for several yearsA:

Acrylic high elasticity waterproof paint is a high-performance waterproof coating based on high-grade acrylic emulsion and scientifically processed by adding a variety of additives and fillers. The upgraded product of the pure material of the ordinary waterproof coating ridge of Guoerjia steel coating, due to the addition of a variety of polymer additives, makes the waterproof performance of the product better than that of ordinary waterproof products, and at the same time has high-strength tensile ductility and can cover cracks. Generally, if it is not considered to be damaged or in the case of special field benches.

The service life is 5-10 years.

Clean up the base:

The surface of the base layer must be carefully cleaned. It is required to be solid and flat without sand, and basically dry; The slope of the base layer meets the design requirements, and no water accumulation is allowed.

Brush the bottom layer: take the acrylic paint and pour it into an empty bucket about 2 3, dilute it with a little water and stir it thoroughly, evenly paint the bottom layer with a roller brush, the dosage is about, and the next process is carried out after the hand is not touched.

Detail additional layer:

According to the design requirements, the sealing paste should be embedded in the groove of the pipe root and other parts, and the sealing material should be tightly pressed and embedded to prevent air from being wrapped, and the battle with the seam wall should be firm, and there should be no cracking, bubbling and collapse. In the grooves of the parts that are easy to leak such as floor drains, pipe roots, and yin and yang corners, they are coated with acrylic paint for leveling. In the floor drain, pipe roots, yin and yang corners and entrances and exits prone to leakage of weak parts, must add a layer of carcass reinforcement material, the width shall not be less than 300, lap width shall not be less than 100, the construction of the first brush acrylic waterproof coating, then pave the reinforcement layer material, and then paint the acrylic waterproof paint twice.

Coating the middle and surface waterproof layer:

Take acrylic waterproof coating, evenly coated on the bottom layer of waterproof layer with a roller brush, each time about, the lower layer of the reinforcement layer and the middle layer must be continuously constructed, not spaced, if the thickness is not enough, add one or more layers to meet the requirements of the coating film thickness specified in the design.

First Water Storage Test:

After 48 hours of drying and solidifying the entire waterproof layer, the water is stored for 24 hours, and there is no leakage.

After the first water storage of the protective layer or finishing layer is qualified, the protective layer or finishing layer can be made.

Second Impoundment Test:

After the completion of the interior decoration project, a second water storage test will be carried out before the completion of the project to check whether the waterproof layer is damaged after completion. No leakage after 24 hours of water storage test is qualified.