0x0012e600 0x00000000 memory referenced by the directive. The memory cannot be read

Reason: There are generally two reasons for this problem: one is the hardware, that is, the memory problemThe other is software.

Hardware: Generally speaking, the possibility of memory problems is not very large, the main aspect is that the memory module is broken. There is a problem with the quality of the memory

There is also a mix of two memory modules with different capacities and different brands, which is also more likely to be incompatible, and also pay attention to heat dissipation, especially after overclocking, you can use mestest software to test the memory, he can accurately detect the stability of the memory. If you have dual memory, and you have mixed memory modules of different brands or purchased 2 hand memory, this problem occurs, then you need to check whether there is a problem with the memory or other hardware is incompatible. If you don't, then you have to look for the software side.

Software: Let's talk about the principle first: there is a buffer in the memory where the data is stored, and when the program puts the data in a certain location, because there is not enough space, there will be overflow.

For example, you can only put one pound of water in a bucket, and if you put two pounds of water in it, it will overflow. And the system is represented on the screen.

This problem often appears on 2000 and XP, 2000 XP is very demanding on hardware requirements, once encountering resource deadlock, overflow or similar to win98 error operation, the system to maintain stability, the above situation will occur. It can also be caused by poor hardware compatibility.

With some beta software installed, it will work well like this.

1.First of all, rule out the cause of the virus, use antivirus software, such as the latest version of 360 Antivirus Quick Kill 3 5 minutes, according to the inspection results, click to deal with it immediately.

2.If the application error prompts that a file is missing, it may be that the file is corrupted, according to this component to query which system component is damaged, reinstall the relevant component, restore the program file, and generally solve the problem.

3.If the components of the software itself are missing, you only need to reinstall the software. For example, when running Thunderbolt, it prompts that a certain file is missing, you can try to reinstall Thunderbolt.

4.If the above method does not work, it may be a conflict between the software. The workaround is to try closing a couple of unrelated running applications and see if the error will reproduce.

If it has been resolved, you will know which two software conflicts are and can be resolved by not running both software at the same time. Or feedback the fault to the manufacturer and urge the manufacturer to upgrade and solve it. If you don't know which software conflicts, the feasible solution is to use 360 Security Guard's system optimization, and in one-click optimization, turn off some infrequently used software startups.

In this way, there are fewer programs running after booting, and the probability of collisions will decrease.

5.For another application error, the screenshot shows "the application is faulty, the **memory address cannot be read or written", this situation is the most complicated, if the above methods can not be solved, it is likely to be a hardware (mainly memory) failure, may be poor compatibility, can only contact the hardware ** vendor for repair. Or reinstall the system, which may be effective for a short time after reinstallation.