The master will show you if there is any inconsistency in the configuration and how many watts of po

It can be said that the 785G motherboard is a derivative of 790G, 785G advocates an integrated graphics card, since you have a discrete graphics card, don't buy this kind of board with integration, it is recommended that you change it to 790 or 780, and then change the graphics card to ATI, such as 4850, to form a 3A platform, the performance will be improved, and in terms of power supply, you can use 500W.

The motherboard is a failure, the chips of the integrated graphics card are high in heat and the two graphics chips are useless, the motherboard is recommended that you go on the Gigabyte GA-M720-ES3(rev.The motherboard of Gigabyte Stuff is very solid and much better than MSI.

Graphics card It is recommended that you use a card so that it is a 3A platform 3A together is more efficient and cheaper graphics card Don't use Yingla's Yingchi is in the circle Known as the king of the screen graphics card It is recommended that you go to the sapphire 4830 is higher than the 9600gt is not a matter of one or two gears **Only 590 yuan。

If you want to overclock, it is not recommended that you go on Kingston's narrow strip of RAM that does not have good electrical performance.

I've been trading in the computer city for 7 years, and I believe me, and I wish you a happy installation

785 supports DDR3, of course, it is with 3 generations of memory, it is recommended to go directly to 2x2G, group dual channel.

The graphics cards are all eliminated, and now the 4830 is very cost-effective, why not buy it for the group 3A platform?

4830 for 800sp is equal to 4850!

Western Digital's 500G green disk AADs are recommended for hard drives

The speed of the 32 megabyte cache is good and very quiet, and the boxed one only needs 350 power supply with Huntkey's rated 400W multi-core, or the 400W wide king of the big buffalo!

Add some money to the graphics card with 9800gt, and use Western Digital for the hard disk, Seagate had a problem earlier. The power supply is rated at 300W, and 350W is safe.

With the third generation of memory, it is more stable than the second generation. The motherboard is average, and there is no potential for upgrades in the future.

But with the current configuration, there is no conflict after replacing the memory, and it can run normally.

Hello friends, the power consumption of the whole machine is roughly as follows:

CPU full load 65 watts, motherboard 5 watts, memory 3 watts, hard disk 8 watts, GT440 graphics card 65 watts, if there is an optical drive plus 23 watts, a total of 169 watts, 12V output needs at least 14A power supply (rated 220 watts) to basically ensure normal operation, under normal circumstances, the output power of the power supply should be left with 10-20% redundancy, because it is necessary to consider the unstable mains voltage and the stable operation of the whole machine under occasional full load, So in the case of not considering the future upgrade configuration, but in terms of this configuration, the landlord should at least match the brand power supply rated at 250 watts, for the sake of safety, it is recommended to choose a power supply rated at 300 watts, the current brand power supply is the first choice of Antek, Zhenhua, FSP and other Taiwanese products, and the domestic Huntkey, Great Wall and other brands of research and development is too slow, and the most expensive, not cost-effective, recommended:

ANTEC BP300P rated 300 watt active. The dual 12V output is up to 276 watts, and it is one of the best power supplies rated at 300 watts, ** around 200-230 yuan.

FSP Blue Storm Energy-Saving Edition 350, rated at 275 watts and active 180 yuan.

If you have other ideas, please feel free to share them**.

From: My own legion.

Huntkey multi-core DH6 400W 340 yuan or Huntkey multi-core R80 -500 500W 439 yuan The quality of Huntkey is better.