What are mechanical watches most afraid of? What are mechanical watches afraid of

Updated on vogue 2024-06-20
19 answers
  1. Anonymous users2024-02-12

    One is fear of water, and the other is fear of falling

    Mechanical watches are precision instruments, and the internal structure of a mechanical watch is very complex. The small case can hold two or three hundred parts, each of which plays an indispensable role, and each gear alternates with each other to form a small system of precision and non-stop.

    In order for the watch to function properly, it also needs to be accurate. How accurate is the time? There are 86,400 seconds in a day, and the error should be controlled within 15 seconds, and an excellent watch needs to be controlled within 5 seconds, which is quite high for a purely mechanical product.

    There are two things that mechanical watches are most afraid of, one is that they are afraid of water.

    If water is involved, it can rust the parts of a mechanical watch, ineffective the lubricating fluid in the watch, increase the friction between the watch gears, and cause the watch to malfunction.

    If there is water in the watch for a long time, there may not be a problem on the outside, but by the time the problem is discovered, the movement may have been badly damaged.

    Usually after the water is ingress, you must deal with it in time! Don't make a big problem a big one! It is advisable to send it to a professional watch repair station immediately, the cost is generally not very high, and if necessary, the waterproof gasket needs to be replaced.

    The water-resistance factor of the watch is now clearly marked.

    A water resistance factor of 30 meters and 50 meters can only mean that when you wash your hands, the water that splashes will not enter the watch.

    If you want to swim, it is best to wear a watch that is water-resistant to more than 200 meters.

    There are two things that mechanical watches are most afraid of, and the second is that they are afraid of falling.

    Mechanical watches. It is a precision instrument, all kinds of fine parts and various gears are occluded, if you love watches with mechanical watches in motion or accidentally collide, it may cause parts to shift and fall off, which may bring fatal damage to the movement.

    I believe that I don't need to explain more about this problem, the precision instrument itself needs to operate smoothly, and the parts inside are very small, if you accidentally fall to the ground, it is difficult to have no problems.

    So take good care of your watches, they are all vulnerable.

    A high-quality watch, properly cared for, can be worn for a long time.

    Borrow Patek Philippe.

    The slogan, "No one can own Patek Philippe, but only for the next generation".

  2. Anonymous users2024-02-11

    As we all know, mechanical watches can generally be divided into manual and semi-automatic two, is already a mechanical product in the category of precision instruments, it can be said that in the case of mechanical watches, it is necessary to accommodate two or three hundred parts in non-stop operation, if you want to ensure that a mechanical watch can run normally, to achieve the purpose of accurate timing of the hour hand, and in a day of 86400 seconds, the timing error of the general mechanical watch should be controlled within 15 seconds, and the excellent mechanical watch needs to control the error within 5 secondsFor such a precision mechanical product, if there is no correct use and proper maintenance, it will cause the mechanical watch to not go. Among them, mechanical watches are most afraid of: fear of water, fear of magnetism, fear of shock.

    Mechanical watches should not be exposed to hot water, because the pervasive penetration of hot water vapor will accelerate the aging of the waterproof rubber ring, and as a result, the watch will lose its waterproof function. The parts in the watch are easy to rust when they encounter water vapor, which makes them ineffective, inaccurate or stops. Even waterproof watches should also be noted, because there is also the aging of the waterproof ring.

    In addition, many people like to swim in summer, but you must understand the waterproof performance of your watch in advance, you can swim at least 200 meters of waterproof, and you must make sure to change the lock before entering the water. Water causes the steel parts of the watch movement to become raw and embroidery.

    Because many of the movements of mechanical watches are metal parts, they are very afraid of magnetism, especially the hairspring in the movement, once magnetized, they will stick together and affect the normal time. Therefore, in daily life, mechanical watches for strong magnetic field objects must be kept away, such as televisions, radios, automatic mahjong machines, etc. After being magnetized, the movement generally appears to suddenly go faster, and if it is serious, it stops directly.

    The movement of a mechanical watch is composed of many relatively small and delicate parts, so it is very afraid of strenuous movement, and cannot suffer violent vibration or impact, otherwise it is easy for the styling parts to fall off. And some people like to wear a watch no matter what they do, such as running, basketball, badminton, golf and other outdoor sports, at this time it is best to take off the watch when the arm swings, because it will more or less affect the various functions of the watch, and cause when your activity is over, the mechanical watch will stop.

    Moreover, mechanical watches are often serviced, and the purpose of maintenance is simple, to maintain the accuracy of mechanical watches and to extend their service life. If you're going to wear it every day, the best way to take care of it is to tighten the mainspring every two weeks to keep its gears running smoothly. Gently rotate the crown until you can feel a slight urgency.

    If it is idle for a long time, it is best to wind it 1-2 times a month, and when the spring is completely relaxed, it is best to turn the crown 20 times to start the movement system again, so that the watch can maintain the normal and accurate operation of the internal mechanism. Then there will be a lot of oil stains in the mechanical watch movement, as well as wear and tear of parts, if you don't maintain it, it will definitely affect the normal use, so it is generally recommended that the mechanical watch be maintained once every 3-5 years.

  3. Anonymous users2024-02-10

    The most feared thing about a mechanical watch is a violent impact or fall, which will damage his original and make it impossible to use it normally.

  4. Anonymous users2024-02-09

    Mechanical watches are most afraid of violently turning the crown, because this is a small metal spiral, which is easy to break if it is too strong, and it is also afraid of something with a magnetic field, because it will affect the direction of the watch.

  5. Anonymous users2024-02-08

    Fear of falling. The parts inside the mechanical watch may be damaged when dropped, and it is very difficult to repair.

  6. Anonymous users2024-02-07

    Mechanical watches are much more complex and precise than electronic watches in parts, so there are more things to pay attention to in use, such as mechanical watches are afraid of falling, which can easily lead to dislocation or damage to parts, mechanical watches are afraid of water, swimming and bathing and other scenarios Try not to wear watches, mechanical watches are afraid of magnetic fields, if they encounter strong magnetic fields, mechanical watches will be magnetized, resulting in increased time errors.

  7. Anonymous users2024-02-06

    1. The interval of adjusting the time.

    As most watch lovers know, the watch should never adjust the time and date between 9:00pm and 3:00am.

    Why, because the watch starts at 9 p.m., the gears of the calendar start to run, and the jump of the date is completed in the early morning, during which if you adjust it manually, it is likely to damage the gears, which may seriously cause the calendar to be misaligned.

    2. Violently turn the crown.

    The crown is usually screw-shaped, but this small piece of metal should not be turned vigorously.

    The crown rotates the internal gears through a shank, and the threads on the shank are so thin that it is easy to get out of touch if you use it vigorously. And this damage is irreparable.

    This may seem like an uncommon situation, but it's actually true! Every year, there will be a lot of watches that have been damaged by water in the repair shop.

    Although most watches nowadays will have waterproof performance, when pressing the chronograph button, the general push will not enter the water, but this button may touch the sealing ring, and when it touches the waterproof sealing ring, it will seep water.

    4. Magnetization. All live objects carry a magnetic field, which can affect the hairspring of a mechanical watch. Therefore, it is best to keep mechanical watches away from mobile phones, household appliances, electric mahjong tables and other electrical appliances that can generate magnetic fields.

    Once a mechanical watch is magnetized, it will directly affect the timekeeping. If it's serious, it will be stopped directly.

  8. Anonymous users2024-02-05

    There are many things that need to be paid attention to, such as fear of bumps and bumps that cause parts to be misplaced, fear of violent winding that will cause damage to clockwork parts, fear of corrosion and scratches, and if the waterproof level is not enough, you also need to consider the problem of waterproofing.

  9. Anonymous users2024-02-04

    Mechanical watches are most afraid of hot water, and although mechanical watches can be waterproof, they cannot prevent water vapor from entering the watch.

  10. Anonymous users2024-02-03

    Most afraid of water. Because mechanical watches are not waterproof, if the watch gets into water, it will damage the parts.

  11. Anonymous users2024-02-02

    Fear of hot water and magnetism. It is best not to touch hot water for mechanical watches, because hot water vapor is pervasive and will accelerate the aging of the waterproof rubber ring. In addition, many of the movements of mechanical watches are metal parts, so they are very afraid of magnetism, especially the hairspring in the movement, once magnetized, they will stick together and affect normal walking.

    After being magnetized, the movement will generally suddenly go faster, and if it is serious, it will stop directly.

  12. Anonymous users2024-02-01

    The most fearful thing about mechanical watches is that we accidentally put water into the watch, and we accidentally drop it on the ground.

  13. Anonymous users2024-01-31

    Most afraid of water. After water ingress, the parts of the mechanical watch will rust, and then the parts will be damaged, and the watch will not be allowed or stopped.

  14. Anonymous users2024-01-30

    Clause. 1. You must wear mechanical watches often after you buy them. If you don't wear it for a long time, then it will also affect the normal function of the mechanical watch. Clause.

    2. Although most of the current mechanical watches are marked waterproof, we should also pay attention to moisture-proof when saving, otherwise it will affect their service life.

  15. Anonymous users2024-01-29

    I am most afraid of electronic watches, because electronic watches are more accurate than mechanical watches.

  16. Anonymous users2024-01-28

    I am most afraid of repairing. All kinds of pit people, those who have repaired know it!

  17. Anonymous users2024-01-27

    I am most afraid of violent ** and falls.

  18. Anonymous users2024-01-26

    Answer: If you use a magnet to attract the hands of a mechanical watch, causing the hands of the watch to not move, it will be harmful to the watch.

    1) The electronic watch is not afraid of the magnetic field, even if there is a strong magnetic field that makes it temporarily stop, it can go away once it leaves the magnetic field. When a mechanical watch is magnetized, it can't walk, or it can't walk accurately. It needs to be demagnetized before it can return to normal.

    2) If the watch hands do not move, the electrical energy will be completely converted into internal energy, generating a large amount of heat.

    If you have any questions, you can follow up!

    Hopefully, thank you!

  19. Anonymous users2024-01-25

    As a precision instrument, watches are, to a certain extent, actually very "squeamish". The "squeamishness" of the watch is mainly reflected in the "three fears": fear of water, fear of shock, fear of magnetism.

    1.Try to avoid wearing your watch to participate in more strenuous sports, such as golfing ......2.Keep the watch away from places with strong magnetic fields, such as your iPhone X, stereos, magnetic buckles, electrical suction doors, security checks, and other objects with strong magnetic fields.

    3.Although many watches are marked as at least "waterproof to 30 meters", in fact, they are only protected against daily water, such as some water encountered when washing hands and face.

Related questions
2 answers2024-06-20

1. Omega watches, Longines watches, Vacheron Constantin watches, Omega watches, Breguet watches, etc., these mechanical watches are better. >>>More

5 answers2024-06-20

Afraid of death, afraid of sticky fly boards, afraid of fly medicine.

5 answers2024-06-20

According to the different types of watches, the mainstream watches on the market can be divided into the following two types: >>>More

26 answers2024-06-20

Women are afraid of a lot! I'm most afraid of getting old! Fear of getting sick! >>>More

7 answers2024-06-20

What ants fear most is that they don't have the support of the group. If the ant acts alone, it will not be able to overcome any difficulties, and of course it will become extinct early, but when thousands of small ants are united, whether it is water, fire or other difficulties, they can overcome it! >>>More