What should I do if I can t connect to the network, what should I do if I can t connect to the mobil

Mobile phones are the most commonly used tools by people today, and with the rapid development of mobile payment and online **, people are more dependent on mobile phones, and mobile phones are inseparable from life and entertainment. However, nothing can be done without a mobile phone. The function of the mobile phone has been greatly reduced, and the mobile phone is not connected to the Internet, so the following points are summarized for you:

If the mobile phone is not connected to the Internet, you can check it in the following two situations:

Step 1: Check if there is a problem with your phone.

1. Check whether to turn on airplane mode, if it is airplane mode, then it will definitely not be able to connect to the wireless network.

2. Check whether the mobile phone is short of power, sometimes it is impossible to connect to the network due to lack of power.

3. If it is not the above 2 reasons, then take your mobile phone to the closest place to the router and try it.

4. If it doesn't work, then restart the phone and see if it can connect.

5. If it still doesn't work, open the wireless network settings and advanced settings of the mobile phone, and adjust the WLAN hibernation setting to "never".

Step 2: Check if there is a router problem.

1. Check if the password of the router has changed, causing the phone to be unable to connect?

2. Check the indicator light of the router to see if it is disconnected.

3. Then open and look at the settings, is there any wireless cancellation?

4. Restart the wireless router and see if it is resolved.

Step 1: First of all, check whether the router is connected to the external network, log in to the router management interface, and see whether the WAN port parameter is non-0 in the running status - WAN port status, if it is 0, please set it again according to the router quick setup guide.

Step 2: Manually set the IP static address; Press and hold the signal name of the corresponding wireless router and select Modify Network.

Step 3: Select Advanced Settings.

Step 4: Click IP Settings and select Use Static IP

Step 5: Enter the IP address manually

Troubleshooting can be done according to the following conditions:

Situation 1] The contact between the SIM card and the metal contacts of the mobile phone is insufficient, and the SIM card can be reinserted.

Situation 2] If the SIM card is damaged or there is a problem with the mobile phone, you can change the phone to test whether it is the SIM card or the mobile phone is faulty.

Situation 3] The current location is a signal blind zone or suddenly no signal, you can change places to test and pay attention to whether the mobile phone signal of other users around you is normal.

Situation 4] If the mobile phone card is in arrears or is shut down, you can pay off the arrears and turn it on.

Situation 5] The service is suspended due to abnormal use of the number, such as the number being used for illegal or illegal activities.

Situation 6] Roaming in Taiwan, Hong Kong, Macao or abroad can only be used after enabling Taiwan, Hong Kong and Macao roaming and international roaming.

Situation 7] If the total traffic generated by the Internet reaches the ** traffic cap value in the current month, the system will automatically turn off the Internet access function, or limit the speed of the network, and the network will be automatically restored in the next month, which shall be subject to your ** traffic cap rules.

What should I do if my phone can't connect to the wifi network?

Check whether you are in arrears or have no network.

There are several scenarios in which the vivo smartphone has the inaccessible mobile issue:

1. Whether the mobile phone is in arrears and shut down;

2. Confirm whether the "Data Network" switch is turned on;

3. Check whether the networking permission of the software is prohibited;

4. The local network environment signal is not good, resulting in no network on the mobile phone;

5. Caused by abnormal mobile phone network.

Vivo smartphone to solve the problem that the phone cannot access the mobile phone:

1. Consult the operator (e.g., 10086) to see if there is any arrears, and if there is arrears, you can recharge the phone bill to use.

2. Go to Settings - Mobile Network - Data Network On.

Steps:

1) Click Settings on the standby desktop.

Please click Enter a description.

2) Enter the mobile network.

Please click Enter a description.

3) Turn on the "Data Network" switch.

Please click Enter a description.

3. Change the network environment and time period to use the network, or change a SIM card.

4. Go to iButler - Traffic Monitoring - Network Management to check whether the software is restricted from network use.

Steps to do it (take vivo X5Pro as an example):

1) Tap i Butler on the standby desktop.

Please click Enter a description.

2) Click traffic monitoring.

Please click Enter a description.

3) Enter the network management.

Please click Enter a description.

4) Check whether the software is banned from the network (green is on, red is prohibited) <>

Please click Enter a description.

Steps:

1) Click Settings on the standby desktop.

Please click Enter a description.

Please click Enter a description.

3) Tap Factory Reset.

Please click Enter a description.

4) Select the settings to restore.

Please click Enter a description.

Summary. 1. The reason why the mobile data is turned on but there is no network: the mobile phone has no traffic; The location of the mobile phone is not good, which affects the signal; Too many people are using the Internet and can't receive it for the time being.

2. Slide down the top curtain of the screen to turn on mobile data, it is recommended to reset the Internet access parameters of the mobile phone: Settings - Mobile Network - Access Point Name - More - Reset to the default settings to upgrade the mobile phone to the latest version. 3. If it doesn't work, please back up the data in your phone and restore the machine to factory settings.

4. Change another SIM card or try to change the time period to eliminate network problems.

1. The reason why the mobile data is turned on but there is no network: the mobile phone has no traffic; The location of the mobile phone is not good, which affects the signal; Too many people are using the Internet and can't receive it for the time being. 2. Swipe down the top curtain of the screen to turn on mobile data, and it is recommended to reset the Internet parameters of the mobile phone

Settings - Mobile Network - Access Point Name - More - Reset to default settings to upgrade your phone to the latest version. 3. If it doesn't work, please back up the data in your phone and restore the machine to factory settings. 4. Change another SIM card or try to change the time period to eliminate network problems.

Excuse me, but please go into more detail?

1. The reason why the mobile data is turned on but there is no network: the mobile phone has no traffic; The location of the mobile phone is not good, which affects the signal; Too many people are using the Internet and can't receive it for the time being. 2. Swipe down the top curtain of the screen to turn on mobile data, and it is recommended to reset the Internet parameters of the mobile phone

Settings - Mobile Network - Access Point Name - More - Reset to default settings to upgrade your phone to the latest version. 3. If it doesn't work, please back up the data in your phone and restore the machine to factory settings. 4. Change another SIM card or try to change the time period to eliminate network problems.