What does this horizontal white line do? What does that white line on the highway do?

Updated on society 2024-06-05
30 answers
  1. Anonymous users2024-02-11

    This kind of horizontal line white bar plays the role of guiding the direction, indicating that this road can turn left or right, this is a public road.

  2. Anonymous users2024-02-10

    What does this horizontal white line do? This horizontal white line plays the role of divide, which means to separate, and is divided into upper and lower.

  3. Anonymous users2024-02-09

    This is the stop line, and this stop line is the stop line when people stop at traffic lights.

  4. Anonymous users2024-02-08

    This constant white line works as a three-way junction where you can turn left or right.

  5. Anonymous users2024-02-07

    This white line starts with the fact that the road can only turn left or right, not forward.

  6. Anonymous users2024-02-06

    The white line is the stop line, and if there is a vehicle passing by, you need to wait patiently before passing.

  7. Anonymous users2024-02-05

    If there is a traffic light in front of this one, when the signal light turns on the red light, it cannot exceed this white line, otherwise it will be captured and deducted points.

  8. Anonymous users2024-02-04

    The meaning of this arrow is that the road can turn left or right, and the white bar in front of it is the stop line.

  9. Anonymous users2024-02-03

    Thank you very much for this, it's very calm, and it just serves as a warning.

  10. Anonymous users2024-02-02

    The vehicle has increased the yellow and white lines on the defense line, and those are violations, which should be outside the anti-seepage white eel to be correct.

  11. Anonymous users2024-02-01

    Then you are diverse, or a relatively large line, and the words of white steel have played a great decisive role.

  12. Anonymous users2024-01-31

    I'm not sure what this does, but it seems to me that it must have a special purpose, so you should follow it.

  13. Anonymous users2024-01-30

    What was built, now I find that it can play a lot of roles.

  14. Anonymous users2024-01-29

    That is to you to slow down naturally, the front must be an accident-prone section, or there are vehicles merging into the main road, you should release the accelerator when you hear this sound, let the car slow down naturally and be ready to brake, after this section of the road you can accelerate! Theoretically, that's what it does! But not many people comply!

  15. Anonymous users2024-01-28

    Overtaking is prohibited in a straight line! Intermittently overtaking is allowed!

  16. Anonymous users2024-01-27

    The yellow line indicates that the road is a two-way lane and cannot be reversed;

    It's a two-way six-lane road, with three lanes coming and going;

    The white dotted line is used to standardize the driving route, and you can use the turn signal to change lanes when there is no car behind.

    Solid yellow and white lines cannot be crossed. Both yellow and white dotted lines can be crossed.

  17. Anonymous users2024-01-26

    The two yellow lines are No Crossing, which means you can't run into the opposite lane!! The white one is the dividing line of the lane in the same direction, and it can be crossed!!

  18. Anonymous users2024-01-25

    The yellow line indicates that the vehicle cannot press the line and cross the past while driving; A white line indicates that lanes can be changed.

  19. Anonymous users2024-01-24

    The white line means you can change lanes, and the yellow line means that you can go in two lanes. Represents a wall. You'll understand when you take the test.

  20. Anonymous users2024-01-23

    The white line is the same direction of the car can cross the lane line, and the yellow solid line is the two-way car is forbidden to cross the line.

  21. Anonymous users2024-01-22

    The yellow and white lines are all for you to say:

    The yellow line is used to distinguish lanes in different directions, and is usually drawn in the middle of the road, like a separation strip, separating the road into two directions

    1. Regardless of the single yellow line or the double yellow line, as long as it is a solid line, it is strictly forbidden to cross, such as overtaking, turning, U-turning, etc. You should not cross the line unless you are driving.

    2. Regardless of the single yellow line or the double yellow line, as long as it is a dotted line, you can overtake or make a U-turn under the condition of ensuring safety.

    3. The single yellow line is generally used on roads within 4 lanes in both directions (including bicycle lanes), and the double yellow line is generally used on wider roads.

    4. If there are double yellow lines, one is a solid line and the other is a dotted line, which side of the dotted line is, the vehicles on that side can temporarily cross from there, such as overtaking or turning.

    2. The white line is used to distinguish different lanes in the same direction, and everyone is in the same direction.

    1. The dotted line can be merged and the lane can be changed.

    2. The solid line is not allowed to merge, and the lane cannot be changed at will.

    Others: There are 17 kinds of traffic markings in China, and their names and functions are:

    1. The center line of the roadway.

    The color is white or yellow, and the function is to separate the flow of traffic in the opposite direction.

    2. Lane demarcation line. A white dotted line is used to separate traffic flows in the same direction.

    3. Roadway edge line. White to indicate the roadway edge.

    4. Stop line. In white, it indicates where the vehicle is waiting for a release signal, or stopping to give way.

    5. Slow down and give way. White, indicating that the vehicle must slow down and give way.

    6. Pedestrian crossing line. White stripes.

    7. Deflector line. White, indicating that the vehicle must drive according to the prescribed route and shall not cross the line.

    8. Roadway width gradient section marking. Consistent with the centerline.

    9. Approach the road obstacle marking. The color is the same as the centerline, indicating that the vehicle must go around road obstacles.

    10. Parking markings. A solid white line indicates where the vehicle is parked.

    11. Harbor-style stop markings. White indicates that the vehicle leads to a dedicated separation approach and parking location.

    12. Entrance and exit markings. White is a marking line that provides a safe intersection for vehicles entering or exiting the ramp and reduces collisions at protruding points.

    13, guide arrow. A solid white arrow is used to guide the direction of travel.

    14, guide line. The solid yellow line, drawn outside the stop line at the intersection, is used to indicate the guide lane.

    15. a diversion belt. White striped bands, drawn at deformed intersections or road surfaces, are used to divert traffic.

    16. Pavement text marking. Yellow to indicate or restrict vehicle movement markings.

    17. No stop line. Yellow mesh stripes, generally used in front of important units and departments, prohibit vehicles from parking.

  22. Anonymous users2024-01-21

    One is for driving safety, and the other is for separating motorized and non-motorized lanes.

  23. Anonymous users2024-01-20

    Oscillating reticles.

    Prompt the driver to drive according to the lane and must slow down, avoid driver fatigue driving, and achieve the purpose of mandatory deceleration, so as to improve the safety of the right vehicle.

    1. Deceleration: Slow down at toll plazas, turns, and dangerous road sections.

    2. Anti-skid: It can play a role in preventing side slip on the curve, and when it rains, it also ensures that the marking line is the same as the friction force of the road surface. 3. Reflection on rainy nights:

    In the dark night of rain, the vibrating double yellow line and the vibrating edge line are still reflective and can ensure normal driving, while ordinary marking lines cannot do this.

    4. Vibration reminder: When the driver is tired and sleeping, before rushing out of the highway, it is necessary to press to the edge line of the vibration bulge, and the car will oscillate and shake and be accompanied by the whistling sound produced by the tires and markings, so that the driver will wake up, adjust the direction, and avoid accidents. So it's a good means of active protection.

  24. Anonymous users2024-01-19

    Zebra crossing, I will understand when I see a motorcycle.

  25. Anonymous users2024-01-18

    This is the zebra crossing that used to be built and then the curbstone was built, so the back line was covered and given it to me.

  26. Anonymous users2024-01-17

    The former zebra crossing, estimated to be left over from the road change.

  27. Anonymous users2024-01-16

    These two white lines are zebra crossings.

  28. Anonymous users2024-01-15

    The white line of the time-sharing chart is the real-time curve. For example, if the transaction at 11:00 is **10 yuan, then the white line is 11:

    00, a point with an ordinate of 10 yuan; At 11:01, the transaction ** is the yuan, then the white line is at the point where the abscissa is 11:01 and the ordinate is the yuan.

    The white line is sampled every minute. In this way, all the dots are connected in turn, and the white line is formed.

    The green line of the tick chart is **. The meaning is as follows: For example, when the market is open 9:

    30 minutes (the first second), the transaction is ** yuan; Then the point of the green line is the abscissa 9:30, the ordinate; At 9:31, the transaction is ** yuan, then the average price becomes (yuan, so the abscissa is 9:

    31, the ordinate is the element; If the transaction of 9:32 yuan is 14 yuan, then the average price is (yuan, so this point is the abscissa is 9:32, and so on, and the green line is formed by connecting the lines in turn.

    The time-sharing chart of some brokerages is not a green line, but a yellow line, which means the same.

    FYI.

  29. Anonymous users2024-01-14

    This is the side effect of the ultrasonic welding process between the film layer and the collector copper tube. Ultrasonic metal welding is the use of high-density energy generated by ultrasonic high-frequency mechanical vibration to produce plastic deformation on the surface of the workpiece and destroy the surface layer under pressure, so that the welded metal is physically connected at room temperature. Manufacturers with advanced production lines such as Four Seasons Muge use laser welding process, laser welding is the use of high-energy laser to melt the welded metal to produce a connection, in the solar heat absorbing plate welding using the form of a solder joint at an interval of 3-5mm.

    Laser welding does not need to be pressurized on the welded workpiece, the overall deformation is small, and the surface damage to the heat absorbing layer is small.

  30. Anonymous users2024-01-13

    After a while, the sound became louder and louder, and I saw a white line appear where the water and sky met in the east, and the crowd boiled again.

    A white line" refers to the waves.

    A white line appeared", which means that the river tide is starting to come from a distance. At this time, the broad tide head stirs up a white splash, and from a distance, it looks like a white line. Yang Wanli, a poet of the Song Dynasty, compared this "white line" to a white jade belt on the Qiantang River in the poem "Haiyong Silver is Guo, Jiang Hengyu Ties the Waist".

Related questions
25 answers2024-06-05

I think it should be a flat tire, because if you have a flat tire, the vehicle can easily lose control, and it is easy to crash into other cars, and if you don't handle it properly, it may overturn.

8 answers2024-06-05

Since ancient times, building roads and bridges has been seen as a measure for the benefit of the people. In modern society, roads and bridges are also considered to be the foundation of economic development, and they are as important as the blood vessels in a person. However, when people build roads or railways, they will inevitably encounter obstacles from mountains and rivers. >>>More

26 answers2024-06-05

Why are there no street lights on the highway?

11 answers2024-06-05

This is because the expressway has the following characteristics: (1) there are no cross lanes, and only when the route is changed, there are entry and exit lanes; (2) The opposite driving lanes are separated by the ** separation zone, except for rescue vehicles, it is not allowed to cross the separation zone; (3) It adopts three-dimensional intersection with other highways, railways and sidewalks; (4) Animals and people outside are separated by railings and are not allowed to enter the highway pavement; (5) No left turn; (6) There are generally 4 lanes - 8 lanes, some near large cities are up to 12 lanes, there is an emergency parking belt on the right, and an emergency lane is isolated by **, which is used by the police in an emergency; (7) The facilities are perfect, the signs are very complete, such as the ground marking is very eye-catching, there are variable speed limiting boards, variable information boards on the side, and there are special radio stations, and the driver is "induced"; (8) Advanced means of communication monitoring and control, with many public and computer networks; The first control room of the management department can grasp the driving status of the whole region at any time, collect information, analyze and process, and control the traffic flow; (9) There are sound and strict management methods, such as stipulating that the first lane from the left of the driving direction is the overtaking lane. >>>More

24 answers2024-06-05

First of all,The powertrain used in gasoline and electric vehicles is different, resulting in differences in their economy under different road conditions. For pure electric vehicles, the generator directly drives the transmission system to start the car, and the current is proportional to the speed of the car. And for fuel models, <> >>>More