How do I change the battery for a Kia K2 key?

1. First press the silver-white button on the key to pop out the mechanical key of the car key, as shown in the figure below.

2. Then use a tool to pry the lid of the car key shell, as shown in the figure below.

3. Wait until you pry the shell of the car key to see the battery inside, as shown in the figure below.

4. Prepare a battery of the same model below and replace it.

5. Finally, buckle the shell of the car key, so that the key battery is replaced.

Actually, my tools are not very easy to use, and the best thing is a small one-word correction knife. Disassemble the key, separate the mechanical key from the key shell, and then separate the key into two halves, the small opening on the top and the space of the mechanical key can be separated by tools, and it is okay to be rough.

The original battery is good, Panasonic battery, produced in Indonesia. But it only took more than a year to run out of power, and it seems that this smart key still consumes power.

When buying a battery, pay attention to the model CR2032 3V, I am using the same model of Nanfu, pay attention not to install the battery in reverse, the positive pole is down, that is, the side with the word is down, and then install it back in the reverse order, no more than 5 minutes before and after.

The first task is to press the silver-white button on the key to pop the mechanical key of the car key. Then you can see the battery inside by priing the lid of the car key shell with a tool, prepare a battery of a similar model, and replace it.

1. Prepare materials: paper cutter, screwdriver.

2. Spare key for the remote control key of the original car.

3. To start dismantling, first open the remote control key battery cover, battery model Panasonic CR 20324, and take off the battery.

5. Dismantling hateful effort, violent dismantling took 20 minutes, sweating profusely, I don't know which rider has a good way The key shell is divided into two parts, there is a dovetail groove in the middle of the glue workmanship is really fine, which is praised.

6. The left is the engine anti-theft chip, and the right door remote control circuit board 7, this is the engine anti-theft chip on the remote control key.

What do you do when you take it apart, take it to repair it if it's broken,

1.The folded key first presses the button to let the key pop out.

2.On the side with the Great Wall logo can be opened, the method is to gently break it with your hand at the position where the key is folded, you can see the battery, and then remove the battery, how to disassemble the battery needless to say.

3.Use a knife to pry open the Great Wall sign, there is a screw inside, remove the screw, and then the position of the battery is 2 screws, and it is easy to divide it into 2 halves after removing 3 together.

4.Note that there is a glass tube in the cover, only 2 to 3mm in diameter, about 15mm in length, this is your password chip, lost only to 4s with the password letter in the 4-digit digits and letters of the password to reconfigure the key, 300 oceans are gone.

Don't know if you're going to replace the battery or if the folded part is damaged?

I just opened it because I couldn't fold it in, and it turned out that a small piece of material card was broken inside, and it was easy to use when I got it out.

Note that the spring has a grip on one side at the bottom, and the other side is horizontal in the middle of the button, and turn around when loading, otherwise if it can't be bounced, this still requires a certain amount of hands-on ability.

The disassembly of the Kia K2 remote control key needs to be carried out with a mechanical key, which can be achieved by prying the operation hole at the backThe specific steps are as follows:

1. Press the unlock button on the back of the car key.

2. Pull out the mechanical key outward.

3. Completely Chi Shi Chong pulled out the mechanical key.

4. Pry the operation hole with a mechanical key.

5. At this time, you can open the car key with your hands.

Precautions for operation:

1. Don't be too nuclear when prying.

2. You only need to press the buckle position when you put it back.

The Kia K3 key is equipped with a button type battery inside, which is used to provide the electronic system power of the key, and no additional tools are required to replace the battery inside, and the internal battery can be replaced by using the mechanical key inside the key, and the specific operation steps are as follows:

1. Unplug the mechanical key of the Kia K3 car key.

2. Use the mechanical key to pry the remote control operation hole.

3. Separate the two sides of the Kia K3 car key.

4. Replace the internal button battery.

5. Merge the Kia K3 car key and insert the mechanical key back to complete the operation.

1. First press the button on the Kia 14 K2 folding key to pop out the mechanical key.

2. Next, use a screwdriver to pry open the shell of the Kia 14 K2 folding key.

4. Let's take a look at the effect of the Kia 14 K2 folding key after opening, see the figure below for details.

5. Finally, replace the new shell and reassemble it, as shown in the figure below.

Hello, if the folding key of this car replaces the outer shell, it is recommended to go to a professional auto repair shop for replacement.

Hello, you just need to go to the auto parts store or buy a new key case online, remove the original shell, take out the chip and key, and install it on the new one.

In this way, you go to change the car remote control battery. He will help you change the shell, you can buy it yourself** or JD.com.

You can buy a key shell directly online, and then install the spare key into it and match it.

You don't think this shell can be replaced, generally speaking, it is recommended that you buy a key case and bring it with you.

How do I change the battery for a car key?