How to use Southeast Automobile V3 Lingyue Lighting?

The operation of the car lights is generally adjusted by the light operating lever. The light lever is usually located on the lower left side of the steering wheel and is about the same length as the radius of the steering wheel, making it easy to operate while holding the steering wheel, and can control the switching between high and low beams, the left and right turn signals and lights on, and the front and rear fog lights on and off (most vehicles). It is used by switch:

On the control lever, there are rotary switches, generally two, on the outside is the light on the switch, there are three gears, respectively, off - (width light) small light - headlight (high beam, low beam); The turn switch on the inside controls the front and rear fog lights on and off. Steering: three gears, left-off-right, with the steering wheel as the dial, push the control lever clockwise, turn on the left turn signal, after the steering can be returned with the steering wheel, or manually pull back, counterclockwise pull, to turn on the right turn signal.

High and low beam switching: two gears, usually placed in the low beam position, with the steering wheel as a reference, after turning on the headlight switch, push down, in order to turn on the high beam, at this time, turn on the high beam, the blue light icon on the dashboard is always on. Lift up, turn on the low beam, on the dashboard, the blue icon is off, in the low beam position, lift upward, for the car reminder light (high beam light on) to remind the role.

When the hand is released, it will automatically return to the low beam position, (if the light switch is not turned on, the light will be turned off).

Southeastern Motors. V3 Lingyue use of various lights:

1.Running lights: the first gear of the light switch, at this time the instrument lights in the car are all lit, and the front and rear of the car will also light up two small lights, the brightness of these two lights is not large, mainly so that the four corners of the body can be seen.

Generally, this light should be turned on when it is getting dark, raining, or in a shady place such as an underground parking lot.

2.Low beam: Used at night when driving in the city.

On the one hand, the roads of the city are illuminated by street lights, and there is no need for high beams to search the road surface in the distance, just to see the road surface conditions in front of the car; On the other hand, there is a large traffic flow on urban roads, and turning on the high beams not only causes the other party to dazzle when meeting the traffic, but also affects the vision of pedestrians on both sides of the road.

3.High beams: It is more suitable to use high beams in the wilderness or on roads without street lighting, but remember to switch back to low beams when driving to avoid dazzling the other driver. When the high beams are on, a striking blue light is lit up on the dashboard to indicate this.

Sometimes turn signals can also act as lighting in narrow areas, so that the driver can see obstacles on both sides. When the turn signals on both sides are turned on at the same time, it plays the role of warning and indicating width.

5.Fog lights. As the name suggests, fog lights are light signals used in foggy weather, and fog lights are more penetrating in fog, so they are easier for vehicles or pedestrians to notice early.

6.Reversing lights: When reversing, there will be white reversing lights at the rear of the car, which can illuminate the road surface and obstacles at the rear of the car on the one hand, and reduce the blind spot when reversing.

On the other hand, it is also a reminder to pedestrians at the rear of the car.

Hello Please refer to the car manual for details.

If you need to adjust the height, there is a 12345 switch in the right leg of the main driver, which is to adjust the height of the headlights, and if there is no ESC, you can find near the headlights and use a Phillips screwdriver to adjust. Southeast Motor V3 Lingyue is an entry-level scooter with great potential for modification. The V3 has a redesign of the front grille, headlights, and front bumper, while the design of the rear bumper has also changed.

In addition, five alloy wheels are available as well as a new Sporty Package. The overall design is basically the same as the old model, but the layout of the buttons in the center control has changed, which is more in line with everyone's usage habits. In addition, the car is equipped with a multi-function steering wheel and a completely new style of seats.

In terms of power system, **Southeast V3 Lingyue will still be equipped with a naturally aspirated engine, with a maximum output of 88kW (120ps) and a peak torque of 143Nm. The drivetrain is a 5-speed manual or CVT gearbox.

In the entry-level family car market, consumers who can fancy the V3 Lingyue, in addition to the low threshold, the maturity of Mitsubishi Power. There is also a good modification potential for this car, ** model sports kit after all is the official sale of forest products, can save a lot of trouble when the annual inspection of the license, if it comes to the improvement of competitiveness, it is nothing more than the addition of some practical configurations, it is difficult to move to the essence.

Millions of car purchase subsidies.