Does it have an impact on the original gearbox 528T8 of JMC Kaiyun to be replaced with a 528T6

Updated on Car 2024-06-22
4 answers
  1. Anonymous users2024-02-12

    It doesn't affect, it's good for the gears to be replaced with a new gearbox, it's good for shifting gears or noise.

  2. Anonymous users2024-02-11

    1.Carbon deposits can cause insufficient combustion of gasoline and cause the engine to shake. The impact of engine carbon deposition on the car is quite large, first of all, to reduce the engine power, that is, to make the power output uneven and gradually decay, in other words, more and more powerless.

    The second is to increase fuel consumption and increase your financial burden. The third is the difficulty of cold start, that is, the difficulty of ignition, it is not easy to get on the car, and finally the carbon deposit in the combustion chamber is strict, and a heavy one will also cause cylinder detonation, and there will be a sound of low-speed acceleration, which will cause damage to the piston and crankshaft, and cause high temperature of the engine, which will seriously affect the safety of the car. Then there is the excessive discharge, which not only fails the annual inspection and inspection, but also directly aggravates the harm of polluting the environment.

    2.Transmission load operation will destroy the quality and friction characteristics of the transmission oil, increase friction and wear, transmission noise will follow, and at the same time, sludge (impurities or dirt) will also be generated inside the transmission (such as the valve body), resulting in transmission frustration, out-of-gear, impact, slippage, abnormal noise, delay, high temperature, oil leakage. (Audi and other high-end models will call the police and enter the transmission protection mode) If it is not solved in time, the transmission will be scrapped.

    Therefore, only by removing the stubborn dirt and impurities in the gearbox and effectively controlling the working temperature of the gearbox can the gearbox problem be completely solved and prevent its recurrence.

    3.Decreased lubrication leads to mechanical wear.

  3. Anonymous users2024-02-10

    Summary. Hello dear.

    It is not possible to change the gearbox to another model, because the original dual-clutch gearbox has been matched with the vehicle, even if it is replaced with other types of gearbox, it cannot be used, and there are too many places that need to be matched.

    Does it have an impact on the change of JMC Kaiyun's original car gearbox 528T8 to 528T6?

    Hello, I am inquiring about the relevant information for you and will reply to you immediately.

    Is the ratio the same between the two gearboxes? China 3 cars and China 5 cars.

    Hello dear. It is not possible to change the gearbox to other models, because the original Souaca dual-clutch gearbox has been matched with the vehicle, even if other types of gearboxes are replaced, it cannot be used, and there are too many places that need to be matched.

    JMC Kaiyun National III gearbox and National V gearbox, what is the speed ratio.

    If you change the gearbox, the speed ratio is different, will it affect the power, the speed can't go up, and the speed can't go up.

    Is the gearbox ratio the same for both models? Help me look it up.

    Regardless of the power, it is illegal for you to be found by the traffic police, and the car will be detained directly.

    Do you need you to help me check the speed ratio of the two products? You don't need to tell me anything else, just tell me what the ratios of the two gearboxes are.

    The differential ratio is 120:1

    Are the two ratios the same? All it needs is good.

    The differential ratio is the same.

  4. Anonymous users2024-02-09

    Summary. Hello, dear. JMC Kaiyun transmission models T8 and T6 bear different torques.

    Gearbox, one of the auto parts, is a device that changes the speed ratio and direction of movement. It is used in automobiles, tractors, ships, machine tools and various machines to change the torque, speed and direction of movement transmitted from the driving shaft to the driven shaft according to different working conditions. A geared gearbox generally consists of a case housing and a number of gear pairs.

    What is the difference between gearbox JC528T6 and JC528T8?

    Hello, dear. JMC Kaiyun gearbox model backup combustion T8 and T6 withstand different torque, which seems to be the same. Gearbox, one of the auto parts, is a device that changes the speed ratio and direction of movement.

    It is used in automobiles, tractors, ships, machine tools and various machines, and is used to change the torque, speed and direction of movement transmitted from the driving shaft to the driven shaft according to different working conditions. A geared gearbox generally consists of a case housing and a number of gear pairs.

    Extended information: Jiangling Motors is in electrification, networking, and intelligence. Jiangling Motors has established Shenzhen Star Fulcrum Technology Branch, which is committed to taking user experience as the core, creating a new highland of intelligent network technology, creating a smart interconnection ecology, and building a new intelligent interconnection ecology for customers in all scenarios such as personalized intelligent network system services, entertainment, life, and travel, so as to realize the perfect interconnection of people, vehicles, and life.

    The company continues to empower smart logistics and provide overall logistics solutions for commercial vehicle customers, and provides C2B customized product services, end-to-end logistics solutions and overall logistics capacity platform services.

Related questions
14 answers2024-06-22

The Buick Excelle manual transmission oil filling port is located at the position of the half shaft of the right gearbox, that is, the screw marked No. 14 can be loosened to fill the transmission oil. >>>More

13 answers2024-06-22

<> we know that manual transmission cars are not allowed to not step on the clutch gear, because when the clutch is not pressed, the transmission input shaft rotates with the engine, and the two are hard connected. At this time, the gear speed difference is too large, and it is not easy to hang up. Second, even if you hang up the gear, the gear is hard, there is no buffer, and it is easy to break the gear. >>>More

14 answers2024-06-22

The gearbox is very expensive, and it is generally not replaced as much as possible, mainly for maintenance, so you say that a replacement is still not needed in this mileage. The transmission oil should have been changed a long time ago (see below), everything needs to be maintained, and it is recommended to replace it immediately; The time for transmission overhaul is generally more than 100,000 kilometers, and it is possible to drive well for 200,000 kilometers, but overhaul is a matter of time or time. The following is a common sense for the extended life of the gearbox for you: >>>More

8 answers2024-06-22

The cause of the flameout is that the locking clutch of the gearbox is not working properly! >>>More

3 answers2024-06-22

1. Check the handbrake to see if it is not loosened to the end; >>>More