What should I do if individual keys fail after the keyboard is flooded?

Under the keyboard is a 3-layer film, printed circuit, water is easy to accumulate in the interlayer after entering, and it is not easy to dry in the sun.

Even if it dries, water stains and other phenomena can cause short circuits in printed circuits, or corrode printed circuits.

You can disassemble the keyboard and wipe off the water stains in the sandwich with a dry towel or toilet paper before installing it and using it.

If the contact points are corroded, you can apply them with graphite or pencil.

PS: The last time I dismantled the keyboard and repaired it by myself should have been 7 years ago.

Summary. What should I do if the keyboard is flooded and the keys are out of orderHello pro 1, the desktop keyboard is flooded, unplug the keyboard immediately, and use a towel or paper towel to absorb water when the keyboard is upside down. 2. After the keyboard falls off the water that can be shaken off, it is best to use a hair dryer to reduce the heat and dry it, the sooner you deal with it, the lower the probability of damage.

3. If the above will be dismantled after processing, it is best to remove each button and clean it up. The desktop key is mostly removable, if it is not detachable, it will not be disassembled, and it will be dried for two days. 4. Whether the keyboard that finally enters the water can be repaired, part of it depends on luck, if the above ones are done or not, you can only change the keyboard, I hope it can help you, I wish you a smooth work and a happy life.

What should I do if the keyboard is flooded and the keys are out of order.

What should I do if the keyboard is flooded and the keys are out of orderHello pro 1, the desktop keyboard is flooded, unplug the keyboard immediately, and use a towel or paper towel to absorb water when the keyboard is upside down. 2. After the keyboard falls off the water that can be shaken off, it is best to use a hair dryer to reduce the heat and dry it, the sooner you deal with it, the lower the probability of damage. 3. If the above will be dismantled after processing, it is best to remove each button and clean it up.

The desktop key is mostly removable, if it is not detachable, it will not be disassembled, and it will be dried for two days. 4. Whether the keyboard that finally enters the water can be repaired, part of it depends on luck, if the above ones are done or not, you can only change the keyboard, I hope it can help you, I wish you a smooth work and a happy life.

Step 1: Power off and unplug the keyboard connected to the computer, otherwise the circuit will be damaged. Step 2:

Turn the keyboard upside down and shake it firmly a few times in your hand until no water droplets fall out. Turn the keyboard upside down in time, tap the bottom of the keyboard and use a napkin to "absorb" the water-seeping part of the keyboard. Step 3:

Open the keyboard, disassemble the keyboard housing, and take out the circuit board and switches. Step 4: Flush underwater, go underwater, so that you can flush off the drink and avoid sticking to the mechanical keyboard keys after drying.

Step 5: Dry the hair dryer, then lay the keyboard flat on the tabletop and expose the keyboard to the sun until dry. Or use a hair dryer to dry the remaining water under the keycaps.

At that time, the keyboard should be turned on immediately and the water inside should be dried, otherwise this keyboard will not be used for a few days, there will be a key error, and then the whole thing will be scrapped. For accidental water ingress of the keyboard, you can open the keyboard and use alcohol to remove limescale or other dirt from the film.

If it still doesn't work after clearing, you can only replace it with a new keyboard. Therefore, it is recommended not to put a water cup next to the keyboard to avoid accidentally spilling over. In addition, after a long period of use, the keyboard does often have ineffective keys, which in many cases is caused by excessive dust accumulation.

Methods of keyboard disinfection

1. Tap the keyboard. Turn off the computer and remove the keyboard from the console. Place a newspaper on the table, flip the keyboard down, about 10 cm from the tabletop, tap and shake.

2. Blow off debris. Use a hair dryer to blow through the gaps in the keyboard keys to blow off the clutter attached to it, then flip the keyboard down again and shake it to beat.

3. Scrub the surface. Use a soft cloth dipped in diluted detergent (be careful not to get too wet) and scrub the surface of the keys. Then vacuum the keyboard again.

4. Disinfection. After the keyboard is cleaned, you may wish to dip it in alcohol, disinfectant or medicinal hydrogen peroxide for disinfection, and finally wipe the surface of the keyboard with a dry cloth.

The above content reference: Encyclopedia - Keyboard.

Dear, hello, I am happy to serve you, my answer is as follows: 1. Unplug the keyboard immediately when the keyboard enters the water, turn the keyboard upside down, and absorb water with a towel or paper towel. 2. After the keyboard gets rid of the water that can be shaken off, it is best to dry it with a hair dryer on a low heat setting, the earlier it is handled, the lower the probability of damage.

3. It is best to remove each button and clean it, desktop keycaps are mostly removable, if they are not removable, put them in the vent for two days. In the end, the keyboard that entered the water can be repaired, part of it depends on the balance of luck, if the above is done or not stuffy, you can only change the keyboard.