The keyboard is flooded, a few keys are out of order, and the keyboard is flooded, and the keys are

Landlord, you are a talent, I just want to persuade you to buy a new keyboard.

But in order to correct your mistakes, I still risk not being beaten.

1。A waterproof keyboard doesn't mean you can use it with a blister, or a little wipe after a strong stream of water.

The correct cleaning method is to open the back cover, blow off the dust inside with a hair gun, take a step back, you have to really wash it with water, please make sure that the water inside the keyboard is dry, before you can connect to the computer to use, waterproof keyboard waterproof is to prevent the keyboard from accidentally entering a small amount of water, and then you can continue to use the water droplets inside to come out, if you don't even pour out the water droplets sooner or later the keyboard will break, and the keyboard can be short-circuited and scrapped if the water is not waterproof.

2.You said what if you don't buy a new one, then there is another way to repair it, I don't think it's necessary, you can buy something at 20 30 and repair it! Unless you're naïve enough to think that the keyboard itself can be good, if you do, I'll say nothing.

If it doesn't respond when you press it, it could be:

1.When you disassemble the keyboard, you touch the wires inside, resulting in poor contact, in this case, you can use an electric pen to check the circuit first, and then reconnect the keys. The easiest way to do this is to slap the keyboard hard if you're not afraid of a broken computer.

My keyboard is just a bad contact. If you are afraid of breaking the shot, disassemble it and install it slowly.

2.The water has corroded the wires, and it's time to go to the repair shop and rebuild the wiring.

3.It may be that you usually use too much, and a foreign object is stuck and needs to be cleaned up.

4.Take a look at the driver to see if there's any problem with it.

5.If none of the above is possible, go to the repair station to find a professional.

The correct way to deal with the keyboard when the keys fail to function is to stop typing, unplug the keyboard from the main unit immediately, and air dry the keyboard. Hold the keyboard in your hand and shake it firmly a few times until no water droplets fall out.

Turn the keyboard upside down in time, tap the bottom of the keyboard and use a napkin to absorb water on the water-seeping part of the keyboard.

How to deal with the keyboard soaked in oil:

There are many friends who like to eat red oil instant noodles, vermicelli, and other foods with a lot of fat and soup. Once this kind of soup is spilled on the keyboard, it is extremely difficult to clean up. Since the keyboard should not be rinsed with water.

Therefore, after the keyboard has oil spills, in addition to the usual operations described above, the keyboard should be rinsed with alcohol as soon as possible. This is because alcohol can be used as a solvent to dissolve grease, but use alcohol that is as pure as possible.

Summary. What should I do if the keyboard is flooded and the keys are out of orderHello pro 1, the desktop keyboard is flooded, unplug the keyboard immediately, and use a towel or paper towel to absorb water when the keyboard is upside down. 2. After the keyboard falls off the water that can be shaken off, it is best to use a hair dryer to reduce the heat and dry it, the sooner you deal with it, the lower the probability of damage.

3. If the above will be dismantled after processing, it is best to remove each button and clean it up. The desktop key is mostly removable, if it is not detachable, it will not be disassembled, and it will be dried for two days. 4. Whether the keyboard that finally enters the water can be repaired, part of it depends on luck, if the above ones are done or not, you can only change the keyboard, I hope it can help you, I wish you a smooth work and a happy life.

What should I do if the keyboard is flooded and the keys are out of order.

What should I do if the keyboard is flooded and the keys are out of orderHello pro 1, the desktop keyboard is flooded, unplug the keyboard immediately, and use a towel or paper towel to absorb water when the keyboard is upside down. 2. After the keyboard falls off the water that can be shaken off, it is best to use a hair dryer to reduce the heat and dry it, the sooner you deal with it, the lower the probability of damage. 3. If the above will be dismantled after processing, it is best to remove each button and clean it up.

The desktop key is mostly removable, if it is not detachable, it will not be disassembled, and it will be dried for two days. 4. Whether the keyboard that finally enters the water can be repaired, part of it depends on luck, if the above ones are done or not, you can only change the keyboard, I hope it can help you, I wish you a smooth work and a happy life.

Step 1: Power off and unplug the keyboard connected to the computer, otherwise the circuit will be damaged. Step 2:

Turn the keyboard upside down and shake it firmly a few times in your hand until no water droplets fall out. Turn the keyboard upside down in time, tap the bottom of the keyboard and use a napkin to absorb water on the water-seeping part of the keyboard. Step 3:

Open the keyboard, disassemble the keyboard housing, and take out the circuit board and switches. Step 4: Flush underwater, go underwater, so that you can flush off the drink and avoid sticking to the mechanical keyboard keys after drying.

Step 5: Dry the hair dryer, then lay the keyboard flat on the tabletop and expose the keyboard to the sun until dry. Or use a hair dryer to dry the remaining water under the keycaps.

Hello dear, I'm glad to answer for you. If your keyboard gets flooded and the keys are malfunctioning, you can try the following:1

Immediately unplug and flip the keyboard out of your computer to let the excess moisture out. 2.Gently wipe the keyboard with a paper towel or towel, but do not use a tool such as a hair dryer to blow dry, as this may blow water into the inside of the keyboard and cause more damage to Zaokai.

3.Take the keyboard apart and clean the inside. If you have experience and know how to disassemble a keyboard, you can take it apart and clean the circuit board and other parts inside.

Please note, however, that disassembling the keyboard may void the warranty. 4.Use a keyboard protector or a waterproof keyboard.

These devices can help prevent moisture from entering the inside of the keyboard. 5.If none of the above solves the problem, then you may need to replace your keyboard or seek professional technical support.

Note that it is best not to use the keyboard again when it gets into water, as this may cause more damage. It is best to take action as soon as possible to avoid further problems.

Dear, hello, I am happy to serve you, my answer is as follows: 1. Unplug the keyboard immediately when the keyboard enters the water, turn the keyboard upside down, and absorb water with a towel or paper towel. 2. After the keyboard gets rid of the water that can be shaken off, it is best to dry it with a hair dryer on a low heat setting, the earlier it is handled, the lower the probability of damage.

3. It is best to remove each button and clean it, desktop keycaps are mostly removable, if they are not removable, put them in the vent for two days. In the end, the keyboard that entered the water can be repaired, part of it depends on the balance of luck, if the above is done or not stuffy, you can only change the keyboard.

Hello dear, if the keyboard is flooded and the keys fail, you can try to follow the steps with a ruler width: 1Immediately turn off the computer and disconnect the power supply, and stop using the keyboard.

2.Turn the keyboard upside down and gently tap the back of the keyboard to let excess moisture out. 3.

Use a clean paper towel or towel to absorb moisture from the surface and crevices of the keyboard. 4.Use a hair dryer to dry the keyboard with low temperature air or natural air, and be careful not to use high temperature hot air to avoid damage to the keyboard.

5.Place the keyboard in a ventilated place and let it dry naturally for at least 24 hours. 6.

When the keyboard is completely dry, reconnect the computer and test if the keyboard is working properly. It should be noted that if you are not familiar with the operation of repairing your keyboard, it is best not to disassemble the keyboard yourself or try to apply a cleaner. If the keyboard still fails after drying, or you are not sure about repairing the keyboard, it is recommended to consult Dianling brain resistant repair personnel or after-sales service providers for more professional help.

At the same time, when using the computer and keyboard, do not eat, drink, and other items that are easy to splash water, so as to reduce the occurrence of similar problems.