My host computer can access the Internet, but the other computer can t, what s going on?

Host computer? If it is through the router to access the Internet, then there is no host, the secondary machine, after the route is set, under normal circumstances, the computer connected to the router can access the Internet, if other computers connected to the router can not access the Internet, then please first detect the hardware facilities such as the network cable, after eliminating the problem, it is the software, set up a home office network in the online neighborhood, generally in the case of normal network card drive, the system is non-toxic, can access the Internet; If you're surfing the Internet through a console, it's a little more cumbersome to set up, but follow the steps'Online neighbors''Set up a home or small office network'Basically can solve the problem, of course, another computer should also be set up according to the steps, full Chinese interface, should be easy to operate.

There is no host for surfing the Internet with a router. Are you sure that your computer with internet access is routed? If so, you first check whether the network card of your machine is good, and then check whether you can access the router on the machine that cannot access the Internet, or input cmd into DOS during operation, enter ping, or the penultimate number after ping is mainly determined by your routing gateway.

If not, check the network cable or change the port of the router. There is nothing else to look up, generally just these questions.

Hello, I'll help you solve this problem! The procedure is as follows:

1. Open the router and plug the original cable of the broadband into the computer directly into the WAN port of the router (see the manual); Find another network cable to plug in the LAN port at one end (marked on the router) and plug in the desktop computer at the other end; 2. Turn on your computer, open the IE browser, enter: pop up the login page, enter the admin password admin (see the manual or) 3, go in and come out of the setup wizard, ask you how to surf the Internet, you choose: pppoe (ADSL virtual dialing) next step 4, enter the broadband and password (don't know to call broadband customer service); Next, 5. Ask you if you want to turn on the wireless network, and select Turn it on; Security options, you just choose:

WPA-PSK WPA2-PSK, enter the key, everything else is automatic, if you understand, read the manual. Save the restart route, 6, at this time the desktop has been able to wired Internet access, and then open the wireless network card in the right corner of the desktop to right-click to view the available wireless network, now your router broadcasts the signal, double-click to connect, enter the key to get it. Wired and wireless access is available.

After the router is successfully set up, the broadband dial-up of the original computer desktop does not need to be clicked, and the IE can be accessed directly by opening the IE. You can follow my steps to try it, and if you have any questions, you can give me feedback in time!