How much thermal grease to use for the hard drive

Thermal grease is a type of high thermal conductivity silicone grease that is commonly used in heat dissipation systems to effectively transfer heat from the heat source to the heat sink, which is essential for the stable operation of equipment. Here's how to use thermal grease: Before using thermal grease, you need to clean the surface of the radiator and heat source to ensure that the surface is clean and free of impurities or foreign objects.

Apply an appropriate amount of thermal grease to the surface of the radiator and heat source to ensure that it is evenly applied. Attach the heat sink to the heat source and press gently to evenly distribute the thermal grease. During installation, care should be taken to avoid excessive force to avoid extrusion or bubbles of thermal grease.

After the installation is complete, a system test should be performed to ensure that the cooling system is working properly. The correct use of thermal grease can effectively improve the efficiency of the heat dissipation system and ensure the stable operation of the equipment. In use....

1 gram should be enough

The heatsink can be directly installed on the metal surface of the hard disk with silicone, and we can use the heatsink of the original idle equipment such as graphics cards, motherboards, etc., at a very low cost. It is worth noting that when applying silicone, it should not be too much, and after installation, it is best to use it as soon as possible.

The heatsink should be rectangular, and try to ensure that it is attached to the middle of the hard disk when installing, or two square heatsinks are also very effective.

If you think that the heat dissipation effect of the heat sink is not ideal, you can buy a hard disk cooling fan, which is extremely cheap.

The installation method is relatively simple, generally on the back of the hard disk, there are 4 screws around it, when installing the fan, the screws around the bracket and the 4 screws of the hard disk are aligned, and the screws can be put on. As shown in the figure below, a cooling fan is a thin metal or plastic plate with one or several small fans embedded in it.

This is the most conventional way to cool the heat, and many real DIYERS use a more economical way to solve the heat dissipation of the hard drive.

Hard drives don't need to use thermal grease to dissipate heat. Hard drives are not very heat-generating parts, and natural heat dissipation alone is generally sufficient. At the same time, hard drives do not have a good heat transfer surface, and it is difficult to dissipate heat by applying thermal grease and installing a heat sink.

If the temperature of the hard drive is too high, you can consider using a fan to cool the heat directly, instead of using a heatsink and thermal grease.

The thickness should not exceed 1 mm (about 1 mm to be precise) (* Too much is not good for heat dissipation.

Ordinary thermal grease will do just 1g is enough.

Generally, it is smeared at the position of the screws on both sides.

The bigger the heatsink, the better if you don't care.

Be careful not to smear it into the screw holes or on the circuit board (short circuit).

In fact, after optimizing the air duct.

The decrease in the temperature of the hard drive will be even more pronounced.

It should be the size of the bottom area of the fan, and only a thin layer is the most reasonable, buy 1 gram is enough, and remember not to apply too little, so that there is no effect, and you can't apply too much, it will overflow. Apply evenly around the center of where you place the fan and the hard drive. Good luck.

No, it will dissipate heat by itself, and it is enough to use 1 gram, just a thin layer.

You don't need it, just add a fan to the case.

1g. The reels are that. Bright dots. There are also a couple of larger point chips.

I think it's better to get a fan to blow on the hard drive.

I haven't used the knowledge of Jianguo mobile hard drive in this way.

Thermal grease. The main function is to dissipate heat, but it needs to be applied to the heat of electrical equipment.

The heat dissipation performance can only be exerted in the middle of the body and the heat dissipation facilities, and if it is applied to other places, not only will it not have heat dissipation performance, but it will also have an adverse impact on electrical appliances.

Thermal grease also has the characteristics of dustproof and shockproof, and can also be used in electrical appliances to strengthen moisture-proof performance, which is an ideal thermal conductive material for electrical appliances. The thermal grease also has resistance to high and low temperature changes and insulating properties.

When players build a PC, there are two types of processors to choose from: boxed and bulk. Boxed treatment surfaces are clean, while bulk processors have a lot of dust or stains adhering to the surface. When we get the processor and don't rush to apply silicone grease to install the heatsink first, we should clean the surface of the processor first.

When cleaning, you should use a clean cotton cloth or cotton ball and wipe it carefully. If there are some stains that cannot be wiped off, you can use some volatile liquids, such as alcohol. When using these liquids, the amount should not be too large, and the cotton cloth or cotton ball is a little damp.

The correct application of silicone grease may not be clear to some players, and the correct application is rarely mentioned in the radiator instructions. The correct method: first determine the size of the contact surface between the radiator base and the CPU, apply silicone grease, and apply a small amount.

Use the finger cover, if you don't have a finger cover, you can use a plastic bag, remember not to apply it directly by hand, and then apply the silicone grease in one direction to the area that is in contact with the CPU, this is to ensure that the silicone grease can fill the uneven heat dissipation area.

1, First clean the CPU core surface and the bottom of the radiator with a high-purity solvent and lint-free cloth, 2, determine the area on the heat sink that is in contact with the CPU, and squeeze a certain amount of thermal grease in the center of the bottom area of the radiator, 3, put your finger into the plastic bag, and then press back and forth with your finger to apply the thermal grease at the bottom of the radiator until the grease is evenly distributed in the area where the CPU is in contact, 4, Wipe off the thermal grease at the bottom of the radiator with a lint-free cloth, At this time, you can see that the color of the place where the bottom of the radiator is coated with silicone grease is different from that of other areas, indicating that the silicone grease has evenly filled the gap of the base, 5, pick up a little thermal grease with a clean tool, and place it in the corner of the CPU core, 6, confirm that there is no foreign matter on the surface of the radiator base and the CPU core, and put the radiator on the CPU, at this time, you can only press lightly, and you can not rotate or translate the radiator, otherwise it may cause the thickness of the silicone grease between the radiator and the CPU to be uneven.

Start by cleaning the c... with a high-purity solvent (such as high-purity isoamyl alcohol or acetone) and a lint-free cloth (such as a camera lens cloth).

Thermal grease.

Thermal grease is a type of material used to fill the gap between the CPU and the heat sink, and this material is also called a thermal interface material. Its function is to conduct the heat emitted by the CPU to the heat sink, so that the CPU temperature can be kept at a stable working level, prevent the CPU from being damaged due to poor heat dissipation, and prolong the service life.

In heat dissipation and heat transfer applications, even two planes with very smooth surfaces can have voids when they come into contact with each other, and the air in these voids is a poor conductor of heat and can hinder the conduction of heat to the heat sink. Thermal grease is a material that fills these voids and makes the heat transfer smoother and faster.

There are many types of silicone grease on the market today, and different parameters and physical properties determine different uses. For example, some are suitable for CPU heat conduction, some are suitable for memory heat conduction, and some are suitable for power supply heat conduction.

Thermally conductive silicone: a highly thermally conductive insulating silicone material.

Thermal conduction.. I think you should know. No matter how tightly connected things are on the surface, there will be a certain gap.

Therefore, due to the excessive heat generation of the CPU, in order to protect the CPU, it is best to coat the CPU heat dissipation shell with silicone... This allows for better heat channeling into the heatsink. Blowing away silicone with a fan can be bought for a few dollars.

To speed up the heat dissipation for the chip, sometimes if you don't get it right, it is the culprit, and the heat can't be dissipated and the CPU may burn.

It mainly plays a better role in heat conduction, so that the CPU or heating element has better contact with the heat sink.

According to the actual comparison test, it is about 3 degrees higher than the temperature without silicone grease, which is still helpful.

Without him, the fan would be an ornament.