How to fold a turtle How to fold a baby turtle

Fold out two diagonal lines of the square paper, and fold two middle lines in the opposite direction, and the crease is in the shape of a "meter".

Please click Enter a description.

Please click Enter a description.

Please click Enter a description.

Please click Enter a description.

According to the crease to close, take the corner of the paper opening as the fixed point, fold the paper edges on both sides inward, leave the crease and then open, fold the two sides inward according to the crease, and the other side is operated in the same way, and finally obtain the basic type of a paper crane.

Please click Enter a description.

Please click Enter a description.

Please click Enter a description.

Please click Enter a description.

Please click Enter a description.

Please click Enter a description.

Cut the top layer of paper along the middle line, and the highest point should not exceed the intersection of the two diagonals of the plane. Then fold the two corners of the cut diagonally upward, and then fold the two corners of the paper layer below from the inside to the outside, and the angle is the same as the two corners of the upper crossing. Symmetry should be maintained on both sides at all times.

Please click Enter a description.

Please click Enter a description.

Please click Enter a description.

After folding the corners of the shorter end inward, leave some distance before folding outwards.

Please click Enter a description.

Please click Enter a description.

After folding the corner of the longer end inward as well, leave a distance and fold it outwards for a longer distance than the previous one.

Please click Enter a description.

Please click Enter a description.

It is easy to change the angle up and down for easy operation. Fold the two sides of the twisted paper corner to connect the two dots as shown in the figure, and fold the extra paper upwards onto the paper corner. Then fold the tip of the corner of the paper inward, turn it over, draw the eyes, and the little turtle will be folded.

Please click Enter a description.

Please click Enter a description.

Please click Enter a description.

Please click Enter a description.

The folding method of the turtle is as follows:

Materials required: 1 15x15cm square, pen, scissors.

1. Fold the square colored paper into the rice crease.

2. Fold the rice crease into a double-layer square.

3. Fold the two sides on both sides of the opening parallel to the middle line to make creases, compact, and then open.

4. Fold the edges of both sides inward along the crease of Figure 3 to form the shape shown in the figure above.

5. Cut the cutting line in Figure 4 with scissors, pay attention to only cut one layer, divide the two triangles, one of which is folded in half to the left front, and pay attention to the position of the triangle crease.

6. The other side is folded in half to the right front in the same position, forming the effect shown in the picture above, these 2 triangles are the hind limbs of the turtle.

7. The two triangular areas in the middle of the origami are folded along the solid line creases drawn in Figure 6, and the two small triangles folded here are the forelimbs of the turtle, as shown in the picture above.

After this step, the area of the turtle's limbs, head, and tail is already very clear.

8. Fold the head and tail according to the solid line dotted line crease drawn in Figure 7, the dashed line valley fold, and the solid line mountain fold.

9. Pay attention to the angle pointed with a pencil in Figure 9 above, open this corner and fold it downward, this step is to make the line of the turtle's head and neck, and the folding method of the two corners is the same.

10. Fold the sharp corners and valleys, and the head will be folded.

11. Turn over the origami paper in Figure 10, see the obtuse angle of the pencil pointing in the front picture, and fold a small triangle inside the origami inward to modify the lines of the turtle's body.

12. Draw a circle along the edge of the turtle shell with a pen, then draw a straight line of the same length up and down the middle line of the shell, draw a hexagon in the middle, and then connect the other four corners of the hexagon with the edge of the shell respectively, as shown in the figure above.

13. Then, in the 2 pentagons and 4 irregular quadrilaterals of the shell, draw the figure with a pen parallel to each side, as shown in the figure above.

14. Finally, we can also make the toes of the turtle by simply cutting out the jagged limbs, draw the eyes, and the cute turtle will be folded.

1. First fold the square paper diagonally, and then fold the top corner of the triangle to the left.

2. Then according to the white thick arrow, open the triangle on the upper surface from the lower opening, and then press down and flatten the upright part.

3. Flip the origami model over, fold the triangle to the right and fold it to the middle, and then fold the upper, left and right corners of the quadrilateral on the upper surface of the origami model to the middle.

4. Then pull up the bottom corner of the upper surface, and at the same time pull up the left and right sides of the structure to the middle to fold, and then cut the top corner of the origami model.

5. Then fold the corners exposed at this time continuously according to the details shown in the detailed drawing, and then press the origami corners on the left and right sides inward and downward.

6. Then turn the triangle at the bottom to the left and right, fold the bottom corner upward, and fold back again.

7. Turn the whole origami model over, and a very beautiful children's origami turtle is made.

Turtle folding method: 1. When you start to fold, the paper you choose is not a square, but a rectangular piece of paper in centimeters.

2. Fold the paper in half.

3. The paper after folding.

4. Fold the crease in half with the left and right top angles towards the middle.

6. Fold the crease in the middle in half to form a configuration similar to an origami frog.

7. Fold the two corners of the lower part inward.

8. Fold the top corner of the origami model downward.

9. After the folding is completed, the top corner of the previous operation is folded back to the operation.

10. Open the superstructure upwards, and then fold the left and right corners of the origami model towards the middle of the origami model.

11. After the folding is completed, fold it back to both sides.

12. After flipping over, you can see that a simple paper turtle appears.

Tools Raw materials. Paper. Scissors.

Method steps.

Fold the small turtle and use scissors to cut the paper into a square first.

Fold the top edge of the square in half to form a triangle.

Fold the left and right corners of the triangle down in half to form a small square.

Fold the bottom two corners of the square upwards to form two small triangles.

The two small upper horns are opened to the left and right sides to form the turtle's two front legs.

Use scissors to cut the bottom and upper corners from the middle and cut them into two small corners.

Fold the left and right corners in half towards the middle line to form the shell of a turtle.

Open the bottom two small horn fingers to the left and right sides and fold them into the two hind legs of the turtle.

Fold the top corner down a short piece.

Then fold the folded horn back some distance upwards to form the head of the turtle, turn the paper around, and a small turtle is folded.

Here's how to fold a turtle with paper to laugh:

1. Prepare a square of colored paper, fold it in half once along the middle line, and align both sides. Then fold the rectangular origami in half on both sides towards the open edge, with one side folded forward and one side folded backwards. The folded triangular origami is then stretched open from the bottom opening, and then compacted downward into a square origami.

2. Then fold the front and back sides to the midline, the crease is the green dotted line fold, the top is folded downward, and finally the part of this step is used as an auxiliary line. Then prop up the inside and fold inward along the auxiliary line of the previous step to form a double triangle. Then cut the middle part to the green dotted line, and fold it along the green dotted line to fold out the two legs of the turtle.

This step then folds the head along the forward and reverse lines, respectively.

3. Then turn the origami over and you can see the basic outline of the turtle. Finally, draw the turtle's eyes, and fold the tail backwards and then forwards to fold the tail, and then fold the turtle out of paper.

Origami is an artistic activity in which paper is folded into various shapes. Origami is not limited to the use of paper. Origami enthusiasts around the world use a variety of materials such as tin foil, napkins, vinegar and acid flakes while adhering to folding specifications.

The little origami turtle repents Hu Su:

1. Take out the square colored paper, fold it on the opposite side, fold one end and two corners to the crease, turn it over, and then fold it to the center line.

2. Fold both sides of the bottom end to the center line, and then fold the bottom end outwards to leave the claw.

3. Fold the head inward and then fold it, retract the small areas on both sides a little, and pinch the back of the turtle.

4. Fold part of the tail diagonally and press it, fold out the tail of the cherry blossom, fold the four claws and claws in front of the reed, and then fold it.

5. Draw the eyes, and the turtle will be folded.

Turtle refers to the general term of turtles and turtles in a broad sense, and refers to species under the turtle family in a narrow sense. In terms of animal taxonomy, it belongs to the class of reptiles, turtles and turtles, and is one of the common turtles and turtles. It is an ancient reptile that exists.

It is characterized by a very strong carapace that allows the turtle to retract its head, tail and limbs into the shell when attacked (except for turtles and snapping turtles).