-
The lock heart is good, and the door can not be opened when it is installed, which is caused by the deviation of the fixed position, which needs to have a certain degree of relaxation, and it is not good to make it too tight.
-
The lock core is good, and it can't be opened once it is installed - there are two situations: one is that the lock core itself is not matched well when it is installed. Second, it is possible that the relative size between the lock and the door is not suitable.
-
The lock cylinder is easy to make, and after it is safe, it may still be a screw or a screw, or the lock cylinder or circlip or something like that is turned over and stuck, so it is not easy to use, and then check and check.
-
If you can't open the door after installing it, I think the lock and the lock cylinder are not properly assembled, so they can't be opened.
-
If you can't open the door as soon as you install it, this should be your form of problem, so it may not be able to install this in Tsinghua, it may be that your lock cylinder is not so well matched.
-
It should be the wrong installation at the time of installation, or there is a problem with the lock cylinder or ** when installing, so this situation is caused.
-
You may have put the cylinder upside down. Causing locks and not being able to open the door. You can ask a master to come to the door to pick the lock.
-
If this happens, it should be caused by the misalignment of the lock core and the lock when the door is installed.
-
In the case of what you said, it should generally be installed in the wrong position, so after it is installed, it is stuck.
-
The reason why the lock cylinder can't be opened as soon as the door is installed is because the door frame is sinking.
-
If the lock cylinder is good, it should be because the lock cylinder does not match the external door lock.
-
If the door lock can't be opened as soon as it is installed, it means that you can't install it or your key can't be matched.
-
It's just good, what happens when you can't open the door if you want to install it? If the mobile phone is good, it can't be opened as soon as it is installed, and it should be that this lock cylinder does not match this. What does it mean to match the eyes, please take a look at it with a professional.
-
If this kind of lock cylinder is good, then the installation may not be right, you can find a professional maintenance worker.
-
This condition is generally due to wear and tear.
As a result, the correct angle cannot be guaranteed after installation.
-
If this happens, it is recommended that you check if it is because the lock is stuck.
-
In this case, the deadbolt of your lock may not work well in some places.
-
Wrong good intentions are easy to make, once installed on the door can not be opened or something, I think this situation is some confusion.
-
The number is installed on the can not be opened, this you should find a professional locksmith to help you.
-
The door is locked, and the lock can't be removed.
Hello, it is very likely that the dial of the lock cylinder has an anti-pry function, and the dial wheel of the lock cylinder is offset at 30 degrees when the key is not inserted. If you feel more comfortable changing the lock cylinder, you can change it yourself. Of course, you still have to go to the hardware store to buy a good lock cylinder, which has good quality and performance.
There is a screw on the side of the door, remove the screw lock cylinder can be pulled out, if you remove the screw lock cylinder and the cavity can not be removed, you must remove the two screws on the handle of the door, so that the inner and outer handles of the door are removed, if your lock cylinder has a lock cylinder protective cover, you must first remove the protective cover. Hope it helps!
-
Summary. 1. If the lock cylinder can't be pulled out of the lock body no matter how hard it is, it should be considered, it may be because the inside is stuck or the inside is too astringent, which will lead to the inability to pull out. You can add oil directly to the lock body to increase the lubricity, and you can effectively pull out the lock cylinder.
2. If it is because the lock plate in the lock cylinder is stuck, you need to use a small wire to return the paddle inside to the position first, and then pull out the lock cylinder, which will become simpler.
1. If the lock cylinder can't be pulled out of the lock body no matter how hard it is, it should be considered, maybe it is because the inside is stuck or the inside is too astringent, which will lead to the inability to pull out. You can directly add oil to the lock body to increase the lubrication of Wang La, and you can effectively extract the Chunling lead from the lock cylinder. 2. If it is because the lock plate in the lock cylinder is stuck, you need to use a small wire to return the paddle inside to the position first, and then pull out the lock cylinder, which will become simpler.
1. Remove the screw of the handle of the anti-theft door (indoor) 2. Remove the screw of the lock guard of the lock cylinder (indoor) 3. In the middle of the lock body (door thickness position), remove the screw in the horizontal position corresponding to the lock cylinder (do not remove the other screws, just that one) 4. Take out the lock cylinder and replace it with a new one 5. Install the lock protector 6. Install the handle. Order of disassembling the lock cylinder: 1
Remove the inner and outer handle panels: Screw on the handle panels in the limb room, one on the top and one on the bottom. 2.
Remove the inner and outer lock cylinder caps: The screws are on the lock cylinder caps in the house, which is the left and right sides of the key insertion. 3.
Remove the lock cylinder screws: The screws are on the side of the door, in the middle of the deadbolt, at the same height as the lock cylinder. The thick one is.
4.At this time, the old cylinder can be removed: the old and new cylinders are the same, and they can be replaced.
A list of specifications for the lock cylinder of the security door.
What should I do if I can't take out the lock core?
At present, there are three specifications of lock cylinders on the market: A-level silver collapse lock on the market is divided into a word key and a cross key, the inner blue belt structure of the A-level lock cylinder is relatively simple, only the change of the marble, the marble groove is few and shallow, the anti-technical opening time is within 1 minute, and the mutual opening rate is extremely high. Class B lock The Class B lock key is a flat key, which is different from the Class A lock in that the round surface of the key has a row of curved and irregular lines.
There are 3 types of lock cylinders: computer double-row lock cylinders, double-row crescent lock cylinders, and double-sided blade lock cylinders. The shape of the super B-level lock is a single-sided blade inner milling groove, and the lock cylinder type is a side post lock cylinder; It was detected by the Ministry of Public Security for 270 minutes and could not be technically opened, and the regional mutual opening rate was zero.
The marble structure is a double row of blades with V-shaped side post locking.
Hello, the anti-theft door lock cylinder generally has four specifications, the height of the answer is 50mm and 70mm two heights, the width is 60mm and 50mm, the combination can be *950, the height of 50mm is 2 meters of the total height of the door light lifting frame, if the user door height is 270mm, you can buy 250mm height, you need to leave a margin of about 20mm, the installation of worship is easier to adjust.
-
The door lock is removed, the lock core is still there, and I can't get out of the house.
Hello, dear, I am happy to answer for you: the door lock is removed The lock heart is still closed in the house and can't get out What to do Answer: After you remove the baffle on the side of the car, you can take out the lock cylinder only after taking out the deadbolt that is stuck in the lock cylinder from the side. Here are some things you can try to see if you can get the deadbolt:
1. The spherical handle on the inside of the door has a top piece at the pipe sleeve, and the spherical handle can be removed by pressing the top piece 2, and the root is a pressing piece with a wire buckle, rotate and unscrew it, and you can see that the deadbolt is hooked on the lock cylinder 3, and you can remove the deadbolt when you see this structure4, use a wrench to forcibly remove the deadbolt If you still can't take out the deadbolt after trying the above operations, it is recommended to contact the locksmith or firefighter for help. The price of the locksmith should be about 100 yuan, and the closed source can be done in less than ten minutes. Hopefully, the above answers will help you remove the deadbolt sooner.
-
Summary. If it is a gourd gall lock cylinder, you need a slotted screwdriver to solve the problem of going back to the deadbolt, but you have to understand the internal structure of the lock body, the general lock body is a card slot design, with a slotted screwdriver to push back to the card slot and then dial the deadbolt lever, so that you can open the anti-theft door only three times, because the other world hooks of the anti-theft door are linked, as long as the bolt of the lock body goes back to the other followed by the back, due to the different lock body models of the anti-theft door, the method of dialing is a little different, But if the hook of heaven and earth falls off, then you have to find another way, first you have to judge which lock point falls off, and then prescribe the right medicine.
Hello dear. Your question has been seen and the answer is being compiled for you, please wait!
Hello Lu Chunqin If it is a gourd gall lock cylinder, you need a slotted screwdriver to solve the problem of going back to the deadbolt, but you have to understand the internal structure of the lock body, the general lock body is a card slot design, use a slotted screwdriver to push back to the card slot and then dial the deadbolt lever, so that you can open the anti-theft door only three times, because the other hooks of the anti-theft door are linked, as long as the bolt of the lock body goes back, the others will go back, due to the different lock body models of the anti-theft door, the method of dialing is a little different, But the hook of heaven and earth has fallen off, then you have to find another way, first you have to judge which lock point of Ye Nai breaks off, and then prescribe the right medicine.
I hope mine can help you, if you are satisfied with my service, please give a thumbs up, I wish you all the best!
-
Summary. There are two main reasons why the lock cylinder cannot be removed, one is that the lock cylinder is stuck, and the other is welded to the lock guard. In the first case, you can use a tool to remove the entire lock, first unscrew the door handle, then unscrew the lock cylinder, and then you can remove the lock cylinder.
In the second case, you can prepare a grinder first, and then grind off the welded place, and then you can remove the lock cylinder.
Hello, I have seen your question and am sorting out the answer, please wait a while
It is very likely that the dial wheel of the lock Bubi Zhenxin has an anti-prying function, and the dial wheel of the lock cylinder is offset at 30 degrees when the key is not inserted for a few acres, you can insert the key, slowly turn the lock cylinder a little, and the lock cylinder should be able to be pulled out! Thick.
Hope mine can help you! Thank you!
The reason is that the key is inserted indoors, and the person who unlocks the lock comes over and turns it with a flashlight, and when it really turns around, the lock core of the door cannot be pulled out.
If you consider that the lock cylinder is already broken inside, it is recommended to change a set of locks directly.
Because the lock cylinder has an anti-pry function, it can't be pulled out if it is broken.
The main one can't be taken down, and the replacement can also be the main one that can't be taken down.
You don't have to take it down to replace it, you can just change a set of locks.
Please wait. There are two main reasons why the lock cylinder cannot be removed, one is that the lock cylinder is stuck, and the other is welded to the lock guard. In the first case, you can use a tool to remove the entire lock, first unscrew the door handle, then unscrew the lock cylinder, and then you can remove the lock cylinder.
If you encounter the second situation, you can prepare a grinder first, and then grind off the ground disturbance potatoes that weld the slow land, and you can remove the lock cylinder by hand.
There are many kinds of lock body specifications of door locks, and the same fingerprint lock will also consider most of the lock body specifications on the market and design, probably: cylindrical lock body, square lock body, Xiaoshuai lock body, overlord lock body, Wang Li self-pop lock body and so on, in general, most doors can be installed fingerprint locks, no need to change the door, unless a few special or foreign lock bodies, but can also be installed by changing the holes in the door, as long as you want to install fingerprint locks, manufacturers and universal installation masters will help you solve. >>>More
Lock with a crescent moon. Installation Method:
1.It is best to ask a master with experience in lock installation to install the lock. If you operate by yourself, please open the fixed distance template according to the installation requirements in the product manual. >>>More
ti: Peach Blossom in the Next World].
ar: Lock Heart Jade]. >>>More
Fingerprint unlock function, the operation method is as follows: >>>More
Class B lock: The most secure anti-theft lock in 2013.