What should I pay attention to when installing a smart lock? What points need to be paid attention t

There are many kinds of lock body specifications of door locks, and the same fingerprint lock will also consider most of the lock body specifications on the market and design, probably: cylindrical lock body, square lock body, Xiaoshuai lock body, overlord lock body, Wang Li self-pop lock body and so on, in general, most doors can be installed fingerprint locks, no need to change the door, unless a few special or foreign lock bodies, but can also be installed by changing the holes in the door, as long as you want to install fingerprint locks, manufacturers and universal installation masters will help you solve.

2. Confirm the opening direction of the door, the size of the lock body and whether it is hung with heaven and earth hooks.

3. Is there any requirement for the material of the door to install the fingerprint lock?

Now there are many types of doors, there are metal doors for outdoor use, and common indoor wooden doors, you may be worried that the wooden door will not be able to hold the fingerprint lock, in fact, this worry is redundant, I have only seen the thief pick the lock, I have not seen the door smashed! The smart fingerprint lock can be installed on wooden doors, iron doors, copper doors, composite doors and anti-theft doors, and even glass doors used by companies can use glass door fingerprint locks.

4. How thick does the door need to be to install a smart fingerprint lock?

The thickness of the door is an important factor that must be considered when installing a fingerprint lock, and the thickness of the door determines the accessories of the lock. Generally, the door thickness corresponding to the smart fingerprint lock is between 40-90mm, if it is thicker, you can note when buying the fingerprint lock, the door thickness outside this range can not be installed, so you must measure the thickness of the door when purchasing, so that the customer service staff can choose the right door lock for you.

Nowadays, the development of science and technology is getting faster and faster. For a safe and smart environment, most homes.

The court will be installed using a smart lock, which further reduces theft. If you have this need, please go directly.

Go to the store and have the right person install it for the convenience of the user. In the smart lock installation, you must:

It is necessary to purchase a smart lock with quality assurance to ensure a certain amount of time, and Luban to the home electronic lock security.

Outfit introduction. First, the analysis of precautions for smart lock installation.

1.Installation environment.

1) Before installation, we must first understand the characteristics of the door, generally look at the material, quality, design.

and then choose the right smart lock according to the material of the door.

2) After choosing a smart lock, you need to check the actual environment, prepare for installation in advance, and try your best.

Make sure the installation is perfect.

2.Installation conditions.

1) Test the dry humidity of the surrounding environment. If the humidity is high, please take some precautions.

tidal measures to prevent the service life of the smart lock from shortening.

2) Pay attention to the position of the door. Depending on the left or right layout, it is open or open.

Installation: In the end, it seems to be built.

Second, the advantages of smart lock installation.

1.High safety factor.

1) Smart locks use the latest technology, combined with people's usage habits. It has anti-theft.

features, which are also loved by consumers.

2) In some cases, it can be automatically locked to ensure the safety of users; One of them.

Some have an automated call feature and use intelligence to keep your property safe.

2.High interactivity.

Some high-end smart locks can record visitors' information on a daily basis. Users can perform remote monitoring.

Improve the safety factor of users, save users' time, save time and energy.

3.Reduce fingerprint markings.

The smart lock adopts the method of opening first and then scanning, placing your finger above the scanning position, from.

Scan from top to bottom, without pressing the scanning position with your fingers, reducing fingerprint residue and fingerprint copying.

Possibility. Smart lock installation is one of the hallmarks of modern furniture decoration. Due to the security index, confidentiality and.

Intelligent design and other factors, it quickly occupied the market and became a household name. Repair indoors.

, be sure to refer to the door information, and then buy the corresponding smart lock to avoid the projection model not being used.

This is very postponed time.

Check before the installation of the smart lock, these few things you must know before the installation of the smart lock!

With the popularity of smart BAI locks, smart locks have now become the first choice for enterprises, businesses and home users. In order to help you install smart locks correctly, the following is an introduction to the precautions for smart lock installation:

1. When opening a hole on the door frame, be sure to measure the distance between the hole to be opened and the edge of the door frame according to the thickness of the door (to measure accurately, otherwise the deadbolt will not be able to pop out and cannot lock the door due to the wrong position, or the door gap gap is too large to cause the door to swing back and forth slightly, which will lead to the feeling that the door is not tightly closed).

2. Smart lock is a high-tech product, the environment in which the door lock should be used plays an important role in the normal use of the door lock, especially in the environment where dust or air contains a high amount of corrosive substances, which will greatly affect the normal use of the door lock. Therefore, it is recommended that you install the door lock after the room has been renovated, so as to facilitate the normal use of the door lock and prolong the service life of the door lock.

3. The quality of fingerprint door lock installation directly affects the normal use and service life of the door lock, it is recommended that experienced personnel install it, 4. Because the door opening method of the lock is different, the opening hole position on the installation mold is not the same, so before marking the line, it is necessary to determine which holes on the installation mold are the holes that need to be opened according to the door opening method of the lock.

5. After the installation and commissioning of the door lock is completed, please register the administrator in time In order to facilitate you to better use the fingerprint door lock, we recommend that when you register your fingerprint, it is best to back up and register a fingerprint or a set of passwords, so that you can open the door normally in the event of an accident such as fingerprint wear.

6. Connection of wires: The connection of wires must be ensured to be correct, and then the connecting wires should be placed to prevent the wires from being crushed or broken by the heaven and earth rods, otherwise the door lock will not work normally.

7. In order to facilitate the opening of the door, before installing the door lock, the distance between the lock and the ground should be measured according to the opening habits of the family.

What should I pay attention to when installing a smart lock? Some friends choose to install their own after buying smart locks, in fact, there are many details that need to be paid attention to in the installation of smart locks, and the following will tell you what problems to pay attention to when installing smart locks.

1.When installing a smart lock, pay attention to the way the lock body opens the door.

In the process of installing the lock body, it is divided into inner opening, outer opening, left opening and right opening. This is adjustable on the lock body, and the specific adjustment method can be found on the lock body, and there are two trigger buttons to adjust the lock tongue of the lock body.

2.Pay attention to the fixing screws when installing smart locks.

In the actual installation, the accessories package contains 4 screw fixing posts and 2 long fixing screws, often customers ask whether the matching screws are missing two, 4 screw fixing columns There are two thick and two thin, the thick fixing column is placed on the top and bottom of the lock, and the thin fixing column is to fix the lock body. No screws are required. The reason is that the lock body is knocked back and forth too many times during use, which will loosen.

If it is not fixed with fixing screws, it will affect the user experience after loosening.

3.Pay attention to the adjustment of the handle when installing the smart lock.

The door lock handle is adjusted by using a wrench out of the reset module, and there is no need to twist the screws at the large square steel. If the handle is replaced by twisting the gear answering screw, there will be a problem that the deadbolt in the hand of Xing Shenhui on the front panel will come out, but after verifying the fingerprint password, the lock cannot be unlocked.

Heart of Kings 2 click to play

The precautions for smart lock installation are as follows:

1. Confirm the door and the old and new, type, thickness, whether it is with the heaven and earth rod, open the door, etc., to determine whether the door is suitable for using fingerprint locks.

2. Disassemble the package and check the fingerprint lock accessories: There is a list of the number of components in the fingerprint lock manual, the front and rear panels, lock body locks, buckle boxes and other large components such as gusset plates are convenient to check, but don't forget that the front and rear straws, square rod springs, countersunk screws, semi-countersunk screws and other small accessories are complete.

3. Disassemble the old lock: After the accessories are ready, the middle book door opening and other conditions are ready, and the old lock can be removed for installation. When disassembling the old lock, care must be taken to keep the parts and functions of the old lock as complete as possible to prevent unexpected accidents during the installation of the fingerprint lock, and the old lock can be replaced with a spare.

4. Install fingerprint lock: Take the moli fingerprint lock in the installation steps as an example, mainly the installation with lock cylinder and the installation of the front and rear panels.

5. Check if the handle and deadbolt are working properly. Check that the keyhole of the door frame fits.

6. Power-on debugging: install the fingerprint lock and debug the mechanical components, and set up and debug the fingerprint lock electronic module. First, initialize the new fingerprint lock and clear the original data.

Enter the fingerprint, password and proximity card for the overall test to see if the overall electromechanical operation of the fingerprint lock is normal. Chapeto.

7. Explain the basic guide of fingerprint lock operation: at this time, all the installation and testing steps are completed, and the fingerprint lock can be used normally; The installer will generally tell the user some precautions for the use of the fingerprint lock, and help the user to be familiar with the use of the fingerprint lock, such as helping the user to enter the fingerprint, etc.

Install a smart lockIn the past, it was still something that only the rich and noble could do with their trembling eyes, but in the modern familyInstall a smart lockIt is becoming more and more common. BecauseInstall a smart lockThere are more and more families, so some doubts about smart locks are becoming more and more prominent, including 4 problemsInstall a smart lockWhat is common and must be paid attention to, let's take a look at it together.

Install a smart lockQuestion 1: Do I need to change the door to install a smart lock?

There are many kinds of lock body specifications for door locks, and the same smart lock will also consider most of the lock body specifications on the market and design, probably there are eggplant stalls: cylindrical lock body, square lock body, Xiaoshuai lock body, overlord lock body, Wang Li self-pop lock body and so on, most doors can be used in generalInstall a smart lockThere is no need to change the door, except for a few special or foreign lock bodies, but it can also be installed by changing the hole in the door, as long as you wantInstall a smart lock, the manufacturer and the almighty installer will definitely help you solve it.

Install a smart lockQuestion 2: How thick does the door need to beInstall a smart lock

The thickness of the door isInstall a smart lockAn important factor that must be taken into account, the thickness of the door determines the accessories of the lock. Generally, the door thickness corresponding to the smart stupid pickpocket lock is between 40-90mm, if it is thicker, you can note when buying a smart lock, the door thickness outside this range can not be installed, so you must measure the thickness of the door when buying, so that the customer service staff can choose the right door lock for you.

Install a smart lockQuestion 3:Install a smart lockAre there any requirements for the material of the door?

Now there are many types of doors, there are metal doors for outdoor use, and common indoor wooden doors, you may worry that the wooden door will not be able to hold the smart lock, in fact, this worry is redundant, I have only seen the thief pick the lock, I have not seen the door smashed! Smart locks can be installed on wooden doors, iron doors, copper doors, composite doors and anti-theft doors, and even glass doors used by companies can use glass door smart locks.

Install a smart lockQ4: What preparations should be made before installation?

1) The direction of opening the door is left inward, right inward, left outward, and right outward, and the door opening direction directly affects the doorknob and deadbolt direction.

2) Check whether the size of the side piece is appropriate, the size of the side piece of the national standard lock body is 24*240mm, if it does not meet, you need to contact the manufacturer to customize the side piece according to the size of the door.

3) Confirm whether there is a heaven and earth ditch on the door, and judge the method: touch the top edge of the door with your hand, whether there is a keyhole, and whether the door lock is in a pop-up state, and whether the top edge of the door has a deadbolt pop-up.

The correct steps for smart lock installation are as follows:

Material preparation: GB2 smart lock, screwdriver, 4 x No. 5 batteries, etc.

1. Adjust the direction of the handle according to the direction of opening the door: after rotating the handle to the direction of pairing with the door, lock the direction adjustment screw of the handle, and rotate the square sleeve at the same time, rotate the handle counterclockwise towards the right axis arrow, and rotate the handle clockwise to the left axis arrow, and install it after confirming that it is correct.

2. Install two M5 connecting posts on the front panel, and adjust the direction of the orange handle according to the direction of the door opening: rotate the handle to the direction paired with the door, and tighten the adjustment screw for the direction of the locking handle.

3. Thread the front panel cable behind the door, align the handle hole with the square axis on the lock body, and load it into the front panel.

4. Connect the front panel cable and the rear panel line, put the square shaft spring into the handle hole, then align the square axis with the handle hole, and the anti-lock ruler intercom bridge line quasi-anti-deadbolt hole, load it into the rear panel, and fix the front and rear panels with two M6 screws.

5. Insert 4 No. 5 batteries, cover the battery cover, lock the battery cover screws, and test whether the key and password can be opened and closed normally.

Smart lock is an emerging security device in recent years, compared with traditional door locks, it can provide us with more secure protection. Installing a smart lock correctly is the key to ensuring safety, and here are the steps to install it:

The first step is to measure the size of the door lock. Measure the size and spacing of the holes according to the door thickness to ensure that the holes where the smart lock is installed are aligned with the original door lock hole.

The second step is to install the lock box. Insert the lock box inside the door, secure it with bolts, and place the deadbolt into the lock box.

The third step is to install the enclosure. Installing the enclosure requires inserting it into the lock box and securing it with screws. This is preceded by turning the movement downwards and making sure that it is correctly placed.

Fourth, install the battery. Smart locks typically use four AA alkaline batteries, so you'll need to remove the case first, and then follow the instructions to place the batteries in the dust booth at the designated location.

The above five steps are the basic steps to install a smart lock to ensure relatively basic security. Finally, we need the administrator to set the key or password, and issue a sensitive and closed authorization for the smart lock, so that the relevant personnel can enter and exit normally.