IBM eServer x226 boot loud how to solve 20

There is no similar noise regulator for you to adjust, remove the fan along with the heat sink, remove the dust, remove the fan separately, uncover the round paper on the front and back, you can find the motor hole, drop a few drops of sewing oil into it, rotate the fan, soak the lubricating oil into the motor, and then install it, remember to apply some silicone grease on the CPU, press the fan tightly and turn it on, it can be very much improved, if the noise is still very loud, it is the motor is aging, and the fan needs to be replaced, I hope it will be useful to you.

I sweat. Run the machine, open the cover, and press and hold the CPU fan. Make sure the noise is not coming from the CPU fan!

Generally, in this case, the fan is cleaned up with a small brush. It is easy to accumulate dust on the fan. If it doesn't work, use a needle to drip some lubricating oil (a small amount).

In general, this can reduce most of the noise. Press a thicker book on the case!

That's the case for me. However, I still recommend that the landlord change to a CPU fan. Generally around 10 quick money. It is available at computer stores.

In addition, loud start-up noise is a common problem of general machines. If it is not maintained and cleaned frequently, it will cause the fan to deteriorate.

Because it's winter. CPU fan oil tends to solid, so when it is first started, the fan rotates slowly, and there is a friction sound, and when the CPU heats up, the oil will naturally liquefie. Try to keep the indoor temperature as much as possible, it can be solved.

If the fan sound is loud and cannot be turned down, clean up the fan.

Give it to me, in a professional opinion, IBM's fan has a special error **, if you take it apart yourself, just cleaning the fan is far from enough, it is currently said to be normal, but summer is coming, plus the heat dissipation will not often crash, of course, you must turn on the fan to put some lubricating oil, and then, there is a pinch on the fan, you must open, it is generally not easy to see, I hope you can find, if you take it apart after the installation is smooth, nothing will happen, If you turn it on after installing it, it will be troublesome if there is an English error, so I suggest you go to a repair shop to help you open it, discuss **, 40 fast money can help you do it,

Dismantle it yourself, because you're out of warranty. You dismantle it yourself and use a hair dryer to blow clean the dust. If the fan is broken......Just change the fan ......You can go to Bubble.com and find your own laptop cooler ......

This kind of problem is recommended to be sent to a professional maintenance point for maintenance, and I can help you test it for free in Beijing.

Clean up the dust, just clean it yourself, you don't need to go to the repair shop, why bother with more money, small problems, just use a hair dryer (cold air).

The fan is getting dust.

Add some oil. Cleanup doesn't solve the problem.

I dismantle my T61 by myself, and the oil is from the bearing factory. hoho also needs to be equipped with thermally conductive silicone, nothing else, there are tutorials on the Internet, you search for it.

Later lubrication of the fan requires a special low-viscosity synthetic lubricant.

Most of the well-known electric fan factories such as Beriaco use fully synthetic electric fan lubricants from Hotolube or Kluber. Fully synthetic base oil production, clear and transparent, colorless and odorless, low temperature resistance. , not contaminated with dust.

Tao Feng has a 120ml white sharp mouth small oil bottle, just drop a few drops, easy to use.

It is not suitable to use ordinary engine oil and butter, which will volatilize quickly in summer and will have an unhealthy odor.

If you don't understand, don't disassemble it yourself, it's dangerous.

Generally, it's just dismantling and cleaning, don't need a lot of money, cheap, and when you meet a good maintenance station, you don't need money. . .

The fans of T4 and R5 are easy to do this, and it can be cleaned up for a while, and you can disassemble it yourself, and you don't need to find a repair.

Find someone to repair it, if it is broken, you can let him compensate If you break it, it will become scrap metal Don't be greedy.

Just spray a fan with some Philips water

It is recommended to go to the repair point to clean the dust.

I have a particularly nice moonshine boot ** to send to you. , sent to your mailbox.

I have, and I have passed it on to you.

Hello, it may be that there is a lot of dust accumulation inside the laptop, which affects the operation of the fan, it is recommended that you try to clean up the dust inside the computer first, and then observe the operation of the computer.

If you still can't solve your problem, you can send it to your local Lenovo service station and ask an engineer to help you deal with it.

Think service station information inquiry:

The fan is badly worn, and it is recommended to replace it.

It is true that the IBM eSeries X226 does not support timed boot, and the BIOS option does not have a related function.

Sofa: I'm also waiting for the answer to this.

I'm afraid not, have you seen anyone use this function?

You can use the "sleep mode + task schedule" of Windows to achieve timed boot.

See here for details:

It mainly depends on how loud the sound of the hard disk is, if the slight sound is normal, it is in normal operation, if you can clearly feel some sound or loud sound, it is not normal, if the notebook is new, you can contact customer service for inspection, if it has been used for a long time, it proves that the hard disk fan is dirty, the dust blocks the vent, then the hard disk operation will be abnormal, affecting the speed of the notebook, if you do not clean up, the dust is more and more, the vent is seriously blocked, then the heat can not be discharged, It will damage the motherboard, and the computer will often shut down automatically, which makes it necessary to go to the after-sales service department for fan cleaning.

When the machine is turned on, the instant sound is that the fan is too dusty, and the vent is blocked.

IBM's notebook hard disk uses Hitachi's hard disk, and the computer itself has to read a large amount of data when it is turned on, so it will enter the rotation at full speed when it is turned on, so the acceleration process from stopping to full speed is also a process of reading sector data when the head leaves the platter and hangs over the disk, so it is normal to produce a slight sound.

If it is not normal, find it as soon as possible within the warranty period.

If you are still looking for a service during the warranty period, you can use it after a while, and it should be a hard drive worn.

All hard drives are almost finished as long as they have sound.

There is too much dust, clean up the fan, you can send it to a professional computer service center to clean up the dust, and then add some oil, it should not be expensive, 2, 30 yuan.

Take it to after-sales service to clean up the dust of the fan.

The only way to get into the system is to reinstall the system and update all the drivers.

The system is broken, so let's install the system.

First look at the device manager to see if there is an exclamation mark or xx device, if there is a reason for the driver or is disabled.

Then plug in the headphones and listen to see if there is any sound to confirm that the speaker is okay.

In the system disk, see if the boot ** is deleted.