Is there a problem with the router when the signal is there?

The possible reasons why the wireless router is unstable and the wifi signal comes and goes are as follows:

1.There may be strong sources of signal interference next to the wireless router, such as microwave ovens, cordless **, magnets, etc. The wireless signals and magnetic fields emitted by these devices will affect the stability of the router's wifi signal.

Workaround: Keep your wireless router away from these sources of interference.

2.The router firmware and hardware do not match, causing the router to work abnormally and causing the WiFi connection to be unstable.

Workaround: Update or roll back the wireless router firmware to find the best firmware version.

3.The Wi-Fi optimization function is enabled, the connection function in poor condition is not used, and the Wi-Fi connection is not checked in the sleep state. Turning on these features will disconnect the phone from the wireless router in certain environments. If power saving is not considered, it is recommended to turn it off.

Solution: Disable Wi-Fi optimization, Disable Do not use connections in poor condition, and select Keep Wi-Fi connections in hibernate state.

4.The Wi-Fi transmission power of the wireless router is too small, or the device is too far away from the router and there is a shield in the middle. If the wifi signal is too weak, it will also drop from time to time.

Solution: Set the maximum power of the wireless router to shorten the distance between the wireless router and the device to minimize obstacles.

5.When there are multiple wireless routers nearby, the same channel may affect each other.

Solution: Change the router channel to channels 1, 6, and 9 to reduce the mutual influence caused by signal overlap.

6.The hardware of the router's wifi transmitter module or mobile phone's wifi receiving module is faulty, causing the wifi to be disconnected.

Workaround: Replace your wireless router or phone.

Yes, check the router.

The solution to the bad signal of the router is as follows:

1. First of all, see if our router supports wireless signal increase. For example, TP-Link's TL-WR2041N's unique "Turbo" button can make the wireless signal increase coverage with one click, and we can directly press this button once. When this light is on, it means that the "turbo" function has been turned on

2. Of course, if you are too far away from the wireless router, the signal will definitely be weakened, so you should try not to be too far away from the wireless router:

3. At the same time, ensure that there are not too many obstructions, and too many obstructions or through the wall will greatly affect the wireless signal

4. The interference generated by some home appliances during operation will seriously affect the wireless signal, so do not place the wireless router near the home appliances:

5. You can restart these wireless terminals, or turn on and off the "airplane mode" of the mobile phone

6. It is also possible that the channel of the wireless router is a problem, you can try to change the channel of the wireless router to a common channel such as 6 or 9

7. There is also a phenomenon that cannot be ignored, overheating of the wireless router will also cause the instability of the wireless signal, you can try to turn off the wireless router for a while:

Poor wifi signal? Is it the router or the phone?

Based on what you're saying, I think you must have 360 Security Guard installed on your computer, and you've fixed the vulnerability. If my guess is correct, you don't have to do any more useless work, just format the C drive, and reinstall the system to solve the problem.

The reason is that after the repair of the system program, it is broken, to be precise, it changes the script of the original program, and the result of the repair is that the program is garbled, and the machine cannot run normally, so the cause of your problem lies in this.

The reasons why routers come and go are as follows:

1. Find out if there is signal interference around, if there is an interference source near the router, it will affect the stability of the wireless router, and the interference of induction cooker and microwave oven on the signal is especially obvious.

2. The wireless router is placed at will, in fact, the signal is also blocked, when the signal encounters the indoor wood, glass, inner wall, and the horizontal obstruction in the antenna will weaken the signal, and the signal will not have much impact in a short distance, but when transmitting over long distances, obstacles become particularly important, so when the wireless router is arranged, obstacles should be avoided as much as possible.

3. There will be a "turbo" button behind the wireless router, this key has the function of strengthening the signal, and it is turned on by default.

That's because your router is not of good quality! We've had this problem too! Replace a router! Don't be cheap! Try to buy foreign ones!

Reset the route.,Re-set it to see it.,Otherwise, it's good to change it.,Now the 300M wireless router is more than 100 points.,Don't make yourself upset.。

The wireless router has nothing metal in the way.

The network card driver is reinstalled.

From the cup of space.

Luckily, I still organize the verses at night.

There was no one before, and there will be no one in the future, driving to death.

Come here, unload and wear it again haha.

After testing, it was smooth to death, and the run was over at one point. I don't feel stuck at all.

Hello, since the wireless signal travels in a straight line, the signal strength of the wireless communication will be weakened if there is an obstacle during the transmission of the ridge. Especially after passing through metal obstacles, the seepage attenuation of the bucket segment of the wireless signal is very large. Therefore, when the wireless signal cannot reach the destination directly, it needs to pass through the wall, and the signal loss through the load-bearing wall is generally greater than that of the non-load-bearing wall.

Experiments have proved that at a distance of 10 meters, the wireless signal can still reach the nominal maximum transmission rate after passing through two brick walls, but after passing through another floor slab, the transmission rate will be only half of the nominal rate. It can be seen that the reinforced concrete wall will greatly weaken the wireless signal, and our current buildings are mainly reinforced concrete wall structure, so the reasonable placement of wireless routers or wireless APs has become one of the important factors affecting the strength of the wireless signal.

My situation is like this, I use TPLin540G+ wireless routing, my bedroom is on the 3rd floor, I can only receive a maximum of 1 grid signal if I take this book to the hall on the first floor, so it is very difficult to access the Internet normally.

Therefore, even if you use a very high power signal to transmit the signal, the signal is still very poor, and in the end it is recommended that you still use a wired network, and the network cable is not expensive.