How to boost the router signal, how to boost the router signal

What to do if the router signal is poor, come and learn this trick.

1. Don't hide the router. I believe that most young people will feel that the router occupies a place in the house, so they hide it. However, this is not the right approach.

This will cause the WiFi network to slow down, as there is a high chance that anything will reduce or absorb the WiFi signal. Therefore, in the problem of what to do if the router has a weak signal, we can put the router in a place with a strong signal, such as a table or a bookshelf.

2. Keep away from electrical appliances and metal objects. In our daily life, wireless**, microwave ovens and other electrical appliances will cause some interference to the wifi signal. So, in order to reduce these unnecessary interferences, we can place the router in a place where there are no electrical appliances, and at the same time, we can also set a different wireless frequency and channel.

In addition, metal can also absorb WiFi signals, so it is best to place the router in a place where there is no metal.

3. Restart. In the question of what to do if the router signal is weak, restarting the router is the most correct way. Because no matter what electrical appliance, when it is unusable or not working, it can be solved by restarting it.

In addition, we can also set up our router to restart regularly during peak hours of Internet access.

4. Upgrade the firmware. Although upgrading your router's firmware is a hassle and time-consuming, when your router has been used for a certain number of years, there is no guarantee that everything will be normal due to the low version. So, if conditions permit, we can solve the problem of weak signal of the router by upgrading the firmware.

However, it's best to replace your router every 7 years!

5. Change your password. Since there are too many software to break the wireless password, it is likely that your home network speed is slow because the password is too simple. Therefore, you can set a difficult and difficult password to solve the problem of weak signal of the router.

But be sure to remember the password you set!

Nowadays, almost every home has a router, and during our use, we may have a poor signal. In addition to the operator's problems, it is also related to our improper placement and use, and the following is a few tricks to enhance the signal of the router.

1. The placement should be "unobstructed".

Try not to place the router in a small, enclosed space, such as a coffee table against a wall or under a desk, where the signal cannot be reflected through the ground or floor. In other words, after a router placed low sends out a signal, part of the signal transmission is invalid. Therefore, it is advisable to place the router in a high place in your home.

2. Restart regularly.

The router works for a long time and will overheat, age, ** over, etc., resulting in a decrease in signal coverage, so it is recommended to set the router to restart every day. With a well-rested rest, the router can make your wifi faster and more stable.

3. "Upgrade" the router.

If you are very mobile, then you can try to modify your router, such as pairing a can with a router to improve the signal strength. After testing, the signal strength of the modified router has indeed been enhanced, and interested former stool friends can try it.

Heart of Kings 2 click to play

Ways to boost the router signal:

1. Don't hide the router.

Some people choose to hide their routers because they don't look so good, but keeping them in a closet or cabinet can slow down the WiFi: walls and doors weaken and absorb the WiFi signal.

We can find a central location in our home and put the router on a table or bookshelf. Because many router products emit WiFi signals downward, placing the router in a higher place is conducive to the WiFi signal evenly divided into every corner of the home.

2. Keep away from electrical appliances and metal objects.

Microwave ovens, wireless**, fluorescent lights, and even other routers next door can interfere with your WiFi signal. To reduce unwanted interference, we can place the router away from household appliances and set up a different wireless channel and frequency.

Some ** tools can help us find the wireless channel with the least interference. If you want an easier way, most routers will automatically choose the best channel based on your current location. Also, metal absorbs signal strength, so it's best to avoid placing the router near metal objects.

3. Restart. This method is the easiest, and most problems can be solved by simply resetting or restarting the router. In addition, we can also set the router to restart regularly during peak Internet access periods every day.

4. Upgrade the firmware.

While upgrading your router's firmware can be a nuisance and time-consuming task, if your router version is already old, updating the firmware will ensure that your router software is in the best and most efficient condition. Of course, it's best to buy a new router every 7 to 8 years.

5. Adjust the antenna of the router.

Most routers come with two adjustable antennas. A wireless network signal is best when the signal is parallel to the antenna inside the device. The antenna inside the laptop is horizontal, whereas the built-in antenna on a desktop computer is vertical.

The orientation of your mobile device's internal antennas depends on how you use them.

Keep your router antennas perpendicular to each other to ensure that both your laptop and phone receive the WiFi signal.

How to increase the signal strength of the router: [Homemade WiFi Signal Booster] Step 1: Take a used beer can and wash it.

Step 2: Pull out the tab.

Step 3: Remove the entire bottom by making a circumferential cut along the bottom of the tank.

Step 5: Draw a line vertically on the reverse side of the left part and cut the iron sheet along the line.

Step 6: Iron sheet, so that the aluminum can retains part attached to the base, pass the antenna through the mouth of the can, and fix the bottom of the can with landing.

The Wi-Fi signal amplifier is complete, as shown below:

Common ways to boost the signal of your home wireless router are as follows:

Change the signal band.

Wireless routers usually support the 1-13 frequency band, usually the router will default to the frequency band 6, so often the signal will interfere, you can change the channel in the wifi settings in the router management page, switch to the uncrowded frequency band.

Update the router firmware.

Update the driver of the wireless network card.

Adjust the router placement.

The optimal location is in the middle of the house, and placing it in the right place will greatly enhance the wireless signal strength.

Install open-source firmware.

Open-source router firmware, such as DD-WRT, is often used to maximize the performance of a wireless router and add more features. Of course, not every router supports DD-WRT firmware, and you can log in to DD-WRT's ** query for specific information. In addition, because the firmware is in the form of open-source customization, the router loses the official warranty service after installation.

Therefore, it is recommended that you choose DD-WRT firmware after the warranty period to improve performance.

Add an AP device.

The least expensive way is to add an access point (AP), just set the second wireless router to AP mode and connect it to the main router through the LAN port. You need to manually set the IP address and gateway of the second router, and you want to assign the same SSID and security channel to it, and turn off the DHCP auto-IP assignment feature. In addition, the wireless relay function can also be achieved through the bridge mode, but the setup is relatively complicated, and it is recommended to use a router of the same brand to achieve more success.

Upgrade the antenna. Some models have external antennas and can often be upgraded. Signal strength can be enhanced by at least 2dBi to 15dBi after upgrading.

Use a dedicated repeater.

The dedicated repeater can effectively extend the coverage distance of the Wi-Fi signal, and can continue to connect to the wireless network in places where the wireless signal is weak or even disappearing, solving the problem of signal blind spots, so that the wireless coverage can reach every inch of the corner you require. It is compatible with a variety of wireless terminals such as smartphones and tablets, and is now produced by manufacturers such as TPLINK, Totolink, and Ecoliv on the market.

Use an AC dual-band router.

Currently, AC dual-band routers support and work in the 5G frequency band. Because now general routers support frequency bands, and many household appliances are also in the frequency band, such as microwave ovens, other routers, so this frequency band is very congested. And 5G is like a newly built highway, with fewer people and fewer cars, so the speed can be fast.

However, the terminal device must support it.

The signal of the router at home is poor, just one of these things, and the signal is instantly enhanced by ten times!

Go to buy a repeater on the **, so that you can expand the range of wireless use very well, and it is also the best and most stable way to use, and a repeater is only a few dozen dollars. All major brands of routers have this kind of equipment.

A repeater can be bought to enhance the signal.

The router modifies the channel.

The wireless router at our home is generally set up with a default channel, and the channel of your router at home may be one of the most congested, so we can change the channel by setting it in the background of the router, or maybe we can change the problem of slow wifi connection card; How to modify: (The background of each brand router is different, please refer to the router manual to modify the channel).

Router location is important.

The range emitted by the router is related to the strength of the signal and the divergence of power and the sensitivity of acceptance, of course, the router is still good for high power, and the wifi coverage is extended to a circle, according to this nature, put it in the middle position, the signal is the best.

Router firmware upgrade.

The new version of the firmware often improves the signal, performance, etc., you can try to use the "Check Version Update" in the background settings interface of the router or go to the official website of the router** (computer operation) Of course, if you don't know how to upgrade, it is better to find a professional.

Enhance the WiFi signal with cans.

Don't believe it! Can a can improve the wireless wifi signal? Don't believe it!

Because aluminum is able to reflect and extend the router's signal; You can find a can to wash it, cut off the bottom with scissors, cut the can body but not cut it, and then put the processed can on the top of the router or antenna; Try it without losing money. What if it's soon.

Change the strong password.

If your home wifi password is too weak, it may be easily pojie!Rubbed nets! Many people use it, your network will become a card slowly, all set a relatively long complex password, it is still very necessary, if necessary, you can use a wifi manager on the computer**!

Let's see who's rubbing your home net...

Signal amplifiers.

In addition to some small skills, if you feel that it is still not strong enough, friends with conditions can buy a wireless signal amplifier in a treasure, so that you can cover the dead corners of the whole family! It's very easy to use

Replace a more powerful router.

Most of the new wireless routers now support the frequency band, and the transmission rate reaches 300Mbps. If your router still only supports BG (54Mbps), you can consider upgrading a new router, after all, there are many devices that need to be connected to the Internet at home, and in the case of multiple devices networking, the router transmission rate should be relatively high to achieve a more comprehensive experience.

Do not be disturbed by other devices.

Interference from other wireless devices, because the current wireless products are basically set in the same frequency band, so there will be many devices in the wireless settings of a certain frequency band, and interference is inevitable. It should be kept away from e.g. Bluetooth devices, wireless mice, etc.

Router antenna placement tips.

If it is a multi-antenna router such as three or four, you can combine the antennas of the router horizontally, vertically, obliquely and other angles, in short, do not point all the antennas to the same position, which can more effectively cover the space and improve the wireless wifi coverage and signal strength.

What to do if the router signal is poor, come and learn this trick.