How to install the socket on the wall, how to fix the socket to the wall

It can also be used to install a socket on the wall.

To install the socket strip on the wall, first of all, there must be a reserved wire on the wall to install the socket strip.

Then use the fixing plate that holds the wall socket to fix the socket on the wall.

Then follow the requirements - power cord, so that the wall socket is installed.

The socket row on the wall should be based on your degree of use, if you use more, you can install more sockets, if you use less, you can install less sockets, and the installation is correct and accurate.

Call an electrician, just in case. Generally speaking, the color of the wire end of the socket is not the same, and it can be docked according to the color.

If you want to install a socket row on the wall, first touch the size of the socket on the wall, and then fix the socket.

For wall sockets, if we install them, we have to put down four square wires. And it is connected according to the phase order of the left zero and the right fire.

The socket row on the wall should have a base, and the panel can be installed.

It's very simple. There are two screws, and then the upper number will do.

Generally, we use wall plug row installation, and if it belongs to the dark line, a ditch must be thrown to lay the line.

You can. Stick a few nails in the wall and hang the socket on it.

Installing the wall socket I need to leave enough wires now to insert the neutral and live wires into the two air wires in a row.

The installation of the socket row on the wall needs to be solved by a professional electrician, and there is no way to do it due to the limited ability of the individual.

The wall socket is a technical job, it is recommended that you can find an experienced master to install it.

How to install the socket row on the wall, log in to the socket row related ** consultation.

You have to install this, and you must install it according to the drawings and your instructions.

How to install the power strip on the wall is very simple, directly fix your power strip on the wall nailed, and finally connect the power cord.

Enter the area and get the decoration for free**].

In home life, if we want to use electrical equipment, then it must be inseparable from the socket, at this time we need to prepare a variety of sockets, to know that each functional area is generally to install sockets. Let's introduce how the socket strip is fixed to the wall. How to fix the socket row to the wall Row of sockets fixed to the wall method:

Adhesive tape and hooks can be easily fixed to the wall without leaving any marks when taken off, and they can also be load-bearing (heavy objects can be hung), which is very convenient for wall protection, installation and removal. There are sales on the market, and it is more expensive than the general people's tape paper. What should be paid attention to in the installation of sockets 1, although there are fewer electrical appliances in the bedroom, but the sockets can not be installed, first of all, there is a socket on both sides of the bed, which is convenient for using desk lamps and mobile phone charging.

If there is a TV in the bedroom, the TV wall also needs one or two sockets, and both strong and weak electricity are indispensable. The installation of air conditioning should also be considered in the bedroom, so a high socket position should be reserved, and it is best to choose a socket with a switch, so that when the air conditioner is not in use, there is no need to pull the plug. Finally, there is the bedroom dresser, which should also reserve one or two sockets to provide convenience for the use of mirror lamps and hair dryers, curling irons, etc.

2. The socket in the living room is the area with the most large electrical appliances, and the number of sockets is the largest in the home. Generally speaking, its sockets are centrally installed, which is why we often see a row of sockets on the TV wall or sofa wall. There are so many sockets in the living room must be planned, and if they are not burned, they will bring trouble to the use of electrical appliances in the back, and will also bring inconvenience to the entire installation process, especially if some electrical appliances need to use three-hole sockets, they must be calculated in advance.

It is best to install a socket on the ground under the coffee table to facilitate boiling tea and water. 3. Before the number and location of the socket are installed, the number and location of the socket must be planned, otherwise it will be confused when installing, and it is difficult to install accurately, which is not only messy, but also easy to be electrocuted. Maybe you will say that it would be good to install less, but the number of appliances in the home is increasing all the time, and it is easy to run out of them.

Summary: The relevant content of how to fix the socket strip to the wall is introduced here, you can refer to the above methods to fix the socket strip to the wall, and the most important thing is not to damage the wall. If you want to know more about related knowledge, you can consult Qijia.com.

Do the math how much it will cost you to renovate your home

with a trunking.

In the fixing method of the power strip, many people are accustomed to fixing the wires with line cards, but the disadvantages of this are also obvious, that is, the line cards will sag and cannot straighten the wires, and may even cause damage to the surface of the wall, and the most important thing is that the cost will be very high. Therefore, it is recommended to buy the trunking from the Internet or the supermarket, the cost is lower than the line card, and the advantages of the trunking are also obvious, it is not easy to fall off, and there is not much damage to the wall.

Enter the area and get the decoration for free**].

In the living room, we always use a variety of electrical appliances, such as TVs, washing machines, rice cookers, water heaters, air conditioners, etc., these are products that are frequently used in daily life, and the use of electrical appliances is inseparable from the socket, so how to install the wall socket? What are the precautions for wall outlets? Let's take a look.

How to install the wall socket First pull down the power switch at home, and prepare materials such as flat screwdrivers, sockets, and socket bushings; Then open the buckle of the bushing, punch holes as needed, and then put the socket into the wall, and connect the three wires according to the regulations; Finally, after the connection, fix it with a screwdriver and fasten the front cover. Precautions for wall socket installation 1. During installation, do not install the socket on combustibles, otherwise if the item burns, the jacket of the switch will be burned out, resulting in the leakage of water vapor from the inner core, and there will be a short circuit or fire; In addition, during construction, an arc suppression device should be installed to avoid the combustion of combustibles to the greatest extent and reduce the possibility of accidents. 2. For the installation of such products, there will be a distinction between surface installation and installation, generally speaking, the surface installation shall not be less than the meter, and the concealed installation shall not be less than the meter, the kitchen and bathroom shall not be less than the meter, and the air conditioning socket shall not be less than 2 meters; In addition, during construction, it is necessary to follow the standard of live wire into the switch and zero line into the lamphead.

3. If the wire end in the socket is damaged, it must be replaced in time, and the bare wire head cannot be replaced to prevent fire; Do not set the socket above the cooktop in the cooking area, so as not to cause the temperature to be too high and the socket heating will cause a fire. 4. During construction, the socket must be tightened, and ensure that the contact of the wires is good, of course, the switch and socket on the wall is not as much as possible, and it is reasonable. Summary:

The above about how to install the wall socket, the precautions for the installation of the wall socket are introduced here, I hope to provide you with some help. If you want to know more about decoration, you can pay attention to the relevant information of Qeeka Home.

Do the math how much it will cost you to renovate your home

In the decoration of new houses, water and electricity renovation is a very important part, the socket is installed in the right place can make the future life more convenient, and the safety of socket installation should also be paid attention to, today let us learn about how to wire the wall socket, which brand of the wall socket is good and the precautions for the installation of the wall socket. Sockets are used in every household, and the installation method of sockets is relatively simple. So let's talk to you about how to install the socket and what you need to pay attention to when installing.

After cutting off the power supply, confirm the location of the socket installation, then use the signal pen to mark the position of the socket that needs to be installed, and then use the drilling tool to punch the hole, and then fix the bottom box of the socket with screws, after connecting the wire, fix it with a screwdriver, and finally buckle the front cover, 1. When installing the socket, it is recommended that you find a professional master to come in for installation, because you need to distinguish the difference between wires when installing the socket, if it is a live wire, then the potential safety hazards are relatively large.

2. While installing the socket, you also need to pay attention to the power of the socket purchased, because some wires have certain requirements for power, and if they are not used properly, there will be certain safety hazards.

3. Before installing the socket, you need to measure the size of the socket box first, and then drill the hole.

4. The installation socket must be installed in accordance with the standard answer method, if it is a three-wire socket, the position of each line must be placed correctly.

5. When installing the socket, the most important thing is to turn off the main valve, if there is still a power supply, then it will have a great impact on the safety of our lives.

6. Of course, the quality of the socket is also very important to install the socket and choose the socket, it is recommended that you can buy a big brand, so that the quality will be guaranteed to a certain extent.

How to install the socket on the wall After cutting off the power supply, confirm the location of the socket installation, and then mark the position of the socket that needs to be installed with a signal pen, and then use a drilling tool to punch holes, and then fix the bottom box of the socket with screws, after connecting the wire, fix it with a screwdriver, and finally buckle the front cover.

Note that the installation of the wall socket should be flat, neat and clean, and the wires in the box should be kept 10 15 cm long for later maintenance! Can't cut too little, the later maintenance operation is inconvenient! Generally, the left zero and right fire are grounded, the zero line is blue, the fire line is red, the ground line is yellow-green, and the color of the whole room line should be the same.

Try to choose a better brand when installing sockets on the wall. The socket should be installed according to your own usage habits, so that it is more convenient to use.

Summary. Hello friends, sticking the socket on the wall requires the use of appropriate tools and materials, here are the specific steps:1

Prepare tools and materials: wall sockets, electric drills, screwdrivers, glue or double-sided tape, rulers, pencils, twist drills, etc. 2.

Determine the location of the outlet: Use a ruler and pencil to mark the location and size of the outlet on the wall, making sure the location is appropriate and meets the installation requirements. 3.

Punching: Use an electric drill and twist drill to drill holes in the wall in order to secure the socket to the wall. If the wall is plasterboard or wood, it can be fixed with nails or screws.

4.Secure the socket: Place the socket in the hole and secure it to the wall using a screwdriver or nail.

5.Stick the socket: If you don't want to use screws or nails to fix the socket, you can use glue or double-sided tape to stick it to the wall.

Clean the wall first, apply glue or double-sided tape, then place the socket in the appropriate position and press gently for a few seconds to ensure that it is firmly pasted. <>

Hello friends, sticking the socket on the wall requires the use of appropriate tools and materials, here are the specific steps:1Prepare tools and materials:

Wall sockets, electric drills, screwdrivers, glue or double-sided tape, rulers, pencils, twist drills, etc. 2.Determine the location of the outlet:

Use a ruler and pencil to mark the location and size of the socket on the wall to ensure that the location is appropriate and meets the installation requirements. 3.Punch:

Use an electric drill and a ruler bucket twist drill to drill holes in the wall in order to fix the Lingge mill socket to the wall. If the wall is plasterboard or wood, it can be fixed with nails or screws. 4.

Secure the socket: Place the socket in the hole and use a screwdriver or nail to nail the wall to secure it. 5.

Stick the socket: If you don't want to use screws or nails to fix the socket, you can use glue or double-sided tape to stick it to the wall. Clean the wall first, apply glue or double-sided tape, then place the socket in the appropriate position and press gently for a few seconds to ensure that it is firmly pasted.

The key is what glue to use?

Friend, I recommend to you a one called transparent super glue, which is sold on a certain treasure, and it is very firm.

Mine is an ordinary wall, not a tile, and what glue is clear.

Transparent superglue is too vague.

The other two can be used:1Methyl rezonel purification gel:

In addition to strong viscosity, it can also effectively adsorb harmful gases such as indoor formaldehyde, and has a certain environmental protection effect. 2.Polyurethane glue:

It has high water resistance and ultraviolet resistance, and is suitable for outdoor or humid rings.

The method of the plug strip is as follows:

The socket strip is a multi-position socket with wire, commonly known as a plug-in board, a socket, and a scientific name for the wire plus the trapped ant long component or extension cord socket. A strip is a multi-position outlet with a power cord and plug that can be moved. More than one power plug can be connected.

1. Use a tool to rotate out the screws that fix the socket, and pay attention to the screws.

2. Connect three wires, connect the live wire on the left, connect the zero wire on the right, and leave the last connecting ground wire, so that the plug row is completed.

3. After all the connections are completed, fix the socket with the screws removed before to prevent dust from entering the inside.

Plug-in brand bulls

Founded in 1995, Bull brand is an enterprise focusing on the R&D, production and sales of civil electrical products with converters and wall switches and sockets as the core, focusing on creating a safer electricity environment for the public, and is known for its high safety. Founded in 1995, the company focuses on the research and development of civil electrical products with converters, wall switches and sockets as the core.

The production and sales of civil electrical products mainly include converters (i.e., extended cord sockets, mobile incubators, etc.), wall switch sockets, LED lighting, digital accessories and other power connection and electricity extension products, which are widely used in home, office and other electrical occasions. Bull's position in the plug row industry is equivalent to Nanfu's position in the battery industry.

With stable high quality, it is calling for wind and rain in the plug and row industry. In supermarkets, the bull's plug row has almost half the number on the shelves.