Is it safe to put the strips on a tile floor?

It is recommended not to plug in from the safety and usability of the ground plug can be installed 10 weak current modules if necessary, you can also customize more wall plugs can be optional modules wall plugs are not good and many other aspects show that the wall plug is not suitable for the ground.

Switch socket installation tips.

1. The switch socket cannot be installed on the flower piece and waist line of the tile.

2. When the bottom box of the switch socket is opened in the tile, the frame cannot be more than 2mm larger than the bottom box, nor can it be opened into a round hole. In order to ensure that the switch is installed in the future, plug in.

The bottom box side should be as flat as possible with the tile, so that there is no need to find a longer screw when installing it in the future.

3. No more than two tiles can be destroyed at the location of the switch socket, and try to install it in the middle of the tiles.

4. The opening at the faucet must be opened into a round hole, not a square hole, and can not be opened into a "U" shape, and then a piece of the hole in the "U" shaped hole is made up, and the size of the hole.

It should not exceed 2mm in diameter, and the edge of the outlet must be flush with the tile.

5. When the socket is installed, the distance between the exposed socket and the ground should not be less than meters.

6. The concealed socket is not less than one meter from the ground, and in order to prevent children from being electrocuted, touched with their fingers or poked by metal objects in the eyelets of the power supply, they must be selected.

Safety socket for the safety flap.

7. The construction wiring requirements of single-phase two-eye sockets are: when the eyelets are arranged horizontally, it is "left zero and right fire", and when it is arranged vertically, it is "upper fire and lower zero".

8. The wiring requirements of the single-phase three-eye socket are: the grounding orifice at the top must be firmly connected, solid, and connected with the grounding wire.

As long as there is no water on the ground and the position does not hinder your steps, it is safe.

Many families have sockets and are used very frequently, but is there any harm to this kind of sockets, and what problems should we pay attention to when we use them? Let's take a look. <>

1. What is a socket.

In fact, it is also called a universal socket, because it has many jacks, which can meet the needs of different plugs, some can be plugged into 3 holes, some can be plugged into 5 holes, and even can be plugged into 7 holes. <

Second, the advantages of the socket.

1. **Relatively economical. A good quality socket may only cost more than 20 yuan. 2. Easy to use. The refrigerator or air conditioner at home uses a 3-pin socket, and some household appliances need a 2-pin socket, which can be met and can be used at the same time.

3. Don't worry about the current and voltage, because the rated power of each electrical appliance is different, so when starting, the required current will be different, and if we choose a socket, we don't need to worry about this problem. <>

Third, the use of sockets is not safe, this kind of sockets have certain dangers, mainly in the following points.

1. When the socket is designed, in order to be compatible with two or three holes, including foreign plugs, it is easy to cause electric shock accidents if the jack is large. 2. The contact area between the connector of this socket and the electrical plug is too small, and the long-term use will make the plug overheated, which will lead to fire.

Fourth, how to choose a socket.

1. Weigh the weight. The socket that meets the national standard uses more copper wires internally, so it is heavier, and the unqualified socket cuts corners and feels very light in the hand. 2. Listen to the sound.

You can try to press its switch several times, if the sound is crisp, it means that it is a qualified socket, if the sound of hunger is more stuck, and it is not smooth when you press it, it means that it is an unqualified socket.

3. Look at the hardness. If it is a good socket, its power cord is moderately soft and the hand, and the socket connection is relatively solid. If it is an unqualified power socket, it feels soft, and the connection is not firm, so it is easy to disconnect.

4. Try the feel. Qualified luck socket, the plugging and unplugging of each hole is relatively moderate, and flexible. When plugging and unplugging the unqualified socket, the force is too tight or too loose, because its elasticity is relatively poor.

1. Depending on the specific situation, some must meet the conditions before they can be used, otherwise there will be hidden dangers of safety acceptance.

2. Before operating, we must first figure out the current and power of the socket bar, the most common ones on the market are 10 amps and 16 amps or kilowatts and kilowatts.

3. Then check what is the total power of the electrical appliances that need to be plugged into the socket strip, and pay attention to the electrical power plugged in the socket strip can not exceed the maximum current and power, otherwise it will call the eggplant code There will be a short circuit or spark.