What is the reason for the slow reaction of the first ignition when starting with one button?

It may be spark plug carbon deposition, the uneven quality of fuel on the market and the congestion of urban traffic make the automobile spark plug easy to produce carbon deposition, spark plug carbon deposition will lead to poor engine work, starting difficulties, unstable idling, poor acceleration, urgent refueling and tempering, exhaust gas exceedance, fuel consumption and other abnormal phenomena.

The slow response of the first ignition is the looseness of the line connection point, which is to be detected.

The slow response of the first ignition with one key start is because this is the start of the ambient cold system, and the system response is a little slower.

Reasons and solutions for one-click start-up that can't catch fire

1. The steering wheel is locked.

Steering wheel lockout is a simple anti-theft feature. When the car is turned off, rotate the steering wheel from the back to the right state to one direction at a certain angle, and the steering wheel will lock with a click. When the steering wheel is locked, the one-button start function does not work.

Solution: Turn the steering wheel left and right while pressing the engine one-button start button to release tension and unlock the steering wheel lock.

2. The gear is not hooked into the P gear.

For automatic transmission vehicles (AT, CVT, AMT), the manufacturer will be informed in the manual: ensure that it is in the P gear position when ignition, just imagine, if it can be ignited directly in D gear or R gear, the vehicle jumping at the moment of ignition is undoubtedly a huge safety hazard.

Solution: Take a snack, the chances of this happening are very small, after all, the car will send you a warning message when you forget to put in P, if you are too sloppy, you can't do anything.

3. The smart key is out of power.

When the vehicle's smart key is out of power, the transmission power of the key is very low, which will make it difficult for the sensor in the car to sense, and the ignition cannot be completed when the key starts.

Solution: Generally, the smart key will be equipped with a mechanical key, and we can directly use the mechanical key to insert the keyhole to start.

Hello! The failure to respond to the one-button start ignition may be caused by the following reasons:1

Low battery: One-button start requires the support of the vehicle's battery, if the battery is low, it may not start. It is recommended to check if the battery is sufficient, and if it is low, you can use a charger to charge it.

2.Low key battery: Some vehicles use keyless start systems that require a smart key to start.

If the smart key battery is low, it may not turn on. It is recommended to replace the battery of the smart dissipation key and try again. 3.

Vehicle breakdowns: Some vehicles may have starting faults, such as circuit failures, engine failures, etc. It is recommended to contact a professional technician for maintenance.

4.Vehicle anti-theft system: Some vehicles need to be unlocked after starting the anti-theft system to start normally.

If the anti-theft system is triggered, it may not start. It is recommended to follow the vehicle manual or contact the after-sales service center to unlock the anti-theft system. If none of the above methods can solve the problem, it is recommended to contact a professional technician for maintenance.

1. When the smart key is out of power, the transmitting power of the key is very low, which makes it difficult for the sensor in the car to sense, and the ignition cannot be completed when the key starts.

2. The gear is not hooked into the P gear, for automatic transmission vehicles (AT, CVT, AMT), the manufacturer will inform in the manual: ensure that it is in the P gear position when ignition.

3. The steering wheel is locked, and when the car turns off, rotate the steering wheel from the back to the positive state to a certain angle in one direction, and the steering wheel will"Click"Lock with a bang. When the steering wheel is locked, the one-button start function does not work.

4. The battery voltage is insufficient, out of power or damaged. The failure to ignite may be due to the loss of power caused by the long-term headlights not being turned off, or the battery life expires.

5. If the car is out of gas, if the fuel gauge shows that it is below the red line, it will naturally not catch fire.

6. Without antifreeze, some car owners add water or inferior antifreeze to the car, which will lead to the situation that the weather is particularly cold, resulting in the entire waterway being frozen, the engine being frozen and cracked, the car water pump can not operate, cannot catch fire, and other parts of the engine are injured.

7. Improper operation, this situation often occurs in vehicles with one-button start and automatic transmission.

See if you are the original one-button start or the post-installed one-button start?

There are few problems with the original one-button start, see if the battery is dead? Or maybe there's a problem near the oil pump.

After the installation: it may be that the wire connection is unstable, because the quality of some one-button starts is really not good, and it is indeed prone to problems.

The reason why the vehicle can't catch fire is due to the operation of the bai: the battery is out of power, the oil tank is out of oil, and the gear is wrong.

Reasons for the use of vehicles: improper oil, lack of antifreeze, and excessive carbon deposit.

In addition to the reasons for improper human operation, there may also be motor failure, or oil pump oil supply, fuel injector problems, sensor failure, etc., encountering these more complex situations, need to be dealt with by professionals.

Summary. The car can be started by pressing one button to start, and its functions are: 1. Multiple start mode; 2. Stable and reliable performance; 3. It is normal for induction intelligence to enter, and what is the reason for the short ignition time of one-key start.

I mean it's not normal for a short time.

There were a few times when the starter was still on the working car, and it was accompanied by a certain amount of shaking.

The car can be started by pressing one button to start, and the vertical standby functions of the chain are: 1. Redundant restart mode; 2. Stable and reliable performance; 3. It is normal for induction intelligence to enter, indicating that the vehicle is fault-free and easy to start, so why is there jitter, it is usually fine, this situation rarely occurs, the ignition is too fast, and the jitter is also more violent.

I recommend cleaning the carbon deposits and checking the spark plugs.