How to remove the smell of the coating on the surface of the washing basin?

The most effective way to remove is to use orange peel, wendan peel, grapefruit peel, and used tea leaves to dry and put them in a gauze bag and put them in the kitchen, which can get rid of the smell in the kitchen. 2.You can apply rice vinegar directly.

Pour it into the sink water pipe, let it stand for half a day, and then rinse it with clean water. Or put three spoonfuls of salt into half a bowl of water, mix and pour in.

The exterior coating of the vegetable sink you said is smelly, it is recommended to use boiling water to brew for a period of time, and then gently wipe it with dish soap and brush. Finally, wash it with water a few times, then the smell can be removed.

1. Buy a sewer drain pipe with an S-shaped water bend, because this kind of water pipe can have a water seal, so that you can prevent the odor of sewage from smelling, which is also a relatively simple deodorization.

You can directly pour the rice vinegar into the sink water pipe, and you can rinse it with water for half a day, and you can put in three spoons of salt.

Baking soda salt 1:1 Add some hydrochloric acid and pour it into the drain to rinse the greasy pipe wall.

Dried with orange peel, bundan peel, yuzu peel, used tea leaves and packed into gauze bags.

Newly bought vegetable pots, especially the cheap ones, often have a special taste.

Wash with water more often or use it for a long time to lose the taste.

This is likely to be the rubber smell of silencing under the stainless steel sink, mainly because the materials used by the vegetable pot manufacturer are too poor, and the treatment method is replaced.

It should be that the paint of your vegetable pot has excessive heavy metals (which will damage the health of your family), so it is recommended not to continue to use it. For eating utensils, try to use ceramic, stainless steel, wooden, bamboo, plastic and other products This is most likely stainless steel water.

If the surface of the sink is painted, it is recommended that you use hot water to disinfect it or spray it with a little deodorant, and then clean it.

The coating under the sink is generally not toxic.

The coating is the sound-absorbing pad. High-end sinks are generally thin with high-quality sound-absorbing pads, mostly made of EVA materials or synthetic rubber with environmental and functional certifications. Soft and odorless, the position and area of the sticker are reasonable. It can effectively achieve the purpose of mute.

Inferior sound cushions tend to be thicker. The beautiful name is "thickened sound-absorbing pad, quieter....In fact, because the material made of recycled material has poor toughness, it is also very easy to disintegrate, lose powder, and it is very easy to break or fail to achieve the silent effect; Second, it can increase the weight of the sink and make consumers feel that "this sink is very thick and heavy".

Summary. Hello dear Generally, when you encounter this kind of problem, the best solution is to use it. If you really feel upset, you can choose to throw it away and buy a new one.

Or with a nano-coating.

1. Nano coating refers to the advanced technology of nano non-toxic coating and the nano coating technology with high technology content.

2. This high-tech nano coating is not only non-toxic and harmless, but also can slowly release a substance to degrade indoor formaldehyde, xylene and other harmful substances.

The outer bottom coating of the washing basin has fallen off, with what to remedy.

Please wait patiently, we are sorting it out, and we will answer it for you immediately, and please don't end the consultation.

Hello dear Generally, when you encounter this kind of problem, the best solution is to use it. If you really feel troubled, you can choose to throw away the sparrow and buy a new one. Or use nano coating 1, nano coating refers to the advanced technology of nano liter rice non-toxic coating, and nano coating technology with high technology content.

2. This high-tech nano coating is not only non-toxic and harmless, but also can slowly release a substance to degrade harmful substances such as indoor formaldehyde and cavity rolling old xylene.

I hope mine can help you, if you are satisfied with my service, please give a thumbs up, I wish you all the best!

Outside, it's inside the kitchen cabinet.

Wait a minute. Hello dear first use oily putty to repair and smooth the place where the paint has been removed, and then polish it with fine sandpaper. Finally, repair with spray dyeing, I don't know what color your door is, it's best to find it if not, it is recommended to find a small board to spray the paint before spraying, and see if the color is suitable after drying.

When the spray paint is first sprayed, there is a difference in color. If you can't find a suitable spray paint, you can also adjust the paint and brush it, but it may not be as good as the spray paint, and the brush can't be too thick at a time. Just brush it a few more times.

I hope mine can help you, if you are satisfied with my service, please give a thumbs up, I wish you all the best!

The first thing to do is to check whether the drainage pipe is drained smoothly and whether there is any blockage affecting the drainage. If it is blocked, it can be treated with alkali powder, and adding a certain amount of alkali to the pipe can help to remove the blockage in the pipeline. At the same time, sterilization removes odors.

If there is no blockage, you can pour some old vinegar into the washing plate, which can also remove the odor.

In addition, you can also use the boiling water of yam peels to remove, peel some yam skins, put them in water and boil them for about ten minutes, at this time the water in the pot will gradually turn brown, and pour the boiled yam water into the sewer, which can effectively eliminate the odor. This is because the reason for the aftertaste of the vegetable washing basin is mainly caused by the fermentation of accumulated waste residues, and after the yam skin is cooked, its solution can be fused with the fermented odor to reduce the odor.

The outer bottom coating of the washing basin has fallen off, with what to remedy.

If the coating on the outer bottom of the sink is off, you can consider using the following methods to repair it:1Use waterproof glue:

You can use waterproof glue to glue the fallen coating back in, then fix it with clips or other tools and wait for the glue to dry. 2.Use epoxy resin:

Epoxy resin is a very strong adhesive that can be used to repair the coating on the outside and bottom of the sink. Apply the epoxy resin to the coating that has fallen off, then fix it with a clip or other tool, and wait for the plum cavity to dry. 3.

Use adhesive tape: You can use clear tape to glue the fallen coating back, then secure it with clips or other tools and wait for the tape to stick firmly. Duan Sui.

Dredging the sewer: Check whether the sewer is unobstructed and whether there are any foreign objects affecting the drainage. If there is a blockage, you can pour an appropriate amount of alkali into the sewer to remove grease and rust from the pipes.

Plastic bag sealing method: fill a thin plastic bag with water, seal the mouth of the bag, and put it on the mouth of the sewer to cover it tightly, which plays the role of sealing the odor. Sewer drain inspection:

Keeping clean water in the bowl-shaped water retention structure at the sewer mouth is more effective in preventing odors from coming out. <

Dredging the sewer: Check whether the sewer is unobstructed and whether there are any foreign objects affecting the drainage. If there is a blockage, you can pour an appropriate amount of alkali into the sewer to remove grease and rust from the pipes.

Plastic bag sealing method: If the sewer is not blocked, but the smell returns, you can use the water sealing principle to fill a thin plastic bag with clean water, seal the bag mouth, and put it on the mouth of the sewer to cover it tightly, so as to seal the odor.

Sewer inlet inspection: At the same time, keep the bowl of the sewer mouth empty water storage structure with clean water, which can effectively prevent odors from coming out.

Add a filter metal mesh cover: If it is just an ordinary sewer pipe that smells bad, you can add a filter metal mesh cover to the water channel to filter out larger solids such as hair and vegetable residue. Then the location of the sewer mouth can be covered with a mesh bag, and it should be noted that the bag must be fixed and fixed, so as not to be washed into the sewer by the flow of water.

Yam skin odor removal method: As long as you peel some yam skins, put them in water and boil them for about 10 minutes, the water in the pot will gradually turn brown, spray the boiled water at the mouth of the sewer, you can quickly eliminate the odor. The aftertaste of the sewer is mainly caused by the fermentation of waste residues, and after the yam is boiled, the benzoquinone contained in it will be dissolved in the water, and the odor produced after fermentation will be directly contacted, making it disappear.