How about the plastic pelletizing machine of Gumo Machinery?

Granulators include condensation granulator, melt granulator, steel belt granulator. This kind of granulator material is not in contact with water at all, the water content is low, there is no dust, and the particles made are full and uniform, the operation is simple, and the output is large and stable. The question of whether it is good or not, and who is better, is a matter of opinion.

Generally, the organization's qualifications, industry experience, external resources, and successful cases should be comprehensively evaluated and considered. More importantly, we need to focus on the aspects we care about at present, and it is not something that can be said in one sentence or two. If you feel that the above is not detailed enough, you can come to consult Guangzhou Kenshao Machinery and Equipment.

Guangzhou Kenshao Machinery & Equipment Co., Ltd. is an international enterprise specializing in steel belt and steel belt transmission system, integrating R&D, production, sales and after-sales service. Stick to it....

There are many manufacturers in the plastic pelletizing machine market, and the plastic granulator products are good and bad, of course, the company is also good and bad.

To choose a plastic pelletizing machine, we must first go to the factory to inspect it, take a look at the situation of the machine and the manufacturer, and the attitude of the person in charge or the boss can not be ignored.

Gumo machinery boss business is still possible, honest and trustworthy, long-term cooperation in operation, many customers are introduced by old customers, the purchase of plastic granulator can first go to Gumo Machinery Factory to take a look.

Plastic granulator is a kind of machinery that can manufacture materials into specific shape products, not only suitable for environmental protection machinery in the plastic industry, the plastic granulator produced by Gumo Machinery is also widely used in chemical, petrochemical, pharmaceutical, food, building materials, mining and metallurgy, environmental protection, printing and dyeing, ceramics, rubber, plastics and other fields, with a wide range of uses.

In fact, we in Shanxi, especially in Yuncheng, use a lot of equipment for Dayun plastic machine, not to say whether our family is good or not, just easy to use, the old brand is better, quality, technology, more understanding and more learning.

The plastic is extruded through the extrusion port of a fixed shape, and then cut after being water-cooled and shaped under the action of the tractor It is mainly used for the continuous production of a variety of products of the same cross-section, such as tubes, rods, profiles, etc., and can also be used for plastic modification and granulation The basic mechanism of extrusion is very simple - a screw rotates in the cylinder and pushes the plastic forward. The screw is actually a slope or ramp that is wound around the central layer. The aim is to increase the pressure in order to overcome the resistance.

In the case of an extruder, there are 3 types of resistance to overcome: the friction of the solid particles (feed) against the cylinder wall and the mutual friction between them when the screw rotates the first few turns (in the feed zone); the adhesion of the melt to the cylinder wall; The logistical resistance inside the melt as it is pushed forward. Injection molding machines.

The quality of the machinery depends on the configuration, and the configuration determines the **, good machinery, good configuration, and ** is also high.

You have to look at the configuration accessories of its machine, if the accessories are all branded and the steel plate is thick, then it is good. In my conscience, I still think that the plastic granulator of [Guoyan Plastic Machinery] is mainly high-end in its configuration, and the motor is a brand.

The rotary cutting water-cooled plastic recycling granulator is also the most advanced product of its kind in the world, with a double extrusion system installed and the product effect is good.

Hongfeng Plastic Machinery Factory, Shahe Town, Laizhou City, is a professional manufacturer of machinery, after years of development, it has formed more than 20 kinds of functions such as non-knotted nets, micro grinding, crushers, granulators, etc. We have a wholly-owned business mode to create satisfactory products for customers. We adopt advanced production methods and modern technology, and have professional and technical personnel and superior manufacturing facilities.

The production of different plastic machinery products in just a few years sold all over the country, and by the majority of customers.

Main business: water granulator crusher, pelletizer, knotless net, micro grinding, greenhouse unit, tube drawing unit and various plastic molds.

We adhere to the business philosophy of "perfect quality, honest reputation, and thoughtful service", and go hand in hand with dealers and users all over the country to create brilliance.

Welcome to inquire.

The first mesh-free die filter pioneered by Leneng, and the number of filters is 5 mesh and 100 mesh is no problem. Interested parties consult 15167663887

An opening sentence in which the language explains the intent or theme of the speech, and then the argument and elaboration in the main body; A humorous opening sentence that begins with humorous, witty language or an example; Quote quotes directly from others to provide the necessary foreshadowing and accentuation for the topic of your speech; A suspenseful opening sentence that can stimulate the curiosity of the audience and prompt the audience to enter the speaker's theme framework as soon as possible; A powerful opening statement that exaggerates the content to be discussed or renders it from an angle that ordinary people have never imagined, so as to arouse the attention of the audience.

The practice of each manufacturer is different, the focus is to find a suitable oneself, come to Wenzhou Ruian to see it, here in the machinery city, there are many manufacturers of granulators. We are one of them.

The equipment of Linyi Recycled Plastic Machinery Factory is not guarded against inspection, and I heard from friends that it is easy to use and has a high output. You open a search on the Internet.

Shanghai Mengshen Machinery's granulator, you may wish to take a look: The electrical appliances are all national brands, and the barrel is thicker than that of general manufacturers, and the most important thing is that it is fair.

Each family has its own advantages, or it should close early, right? The key depends on your ideas and materials, what kind of material do you do?

Twenty years of manufacturers, the quality is still believed.

The plastic pelletizing machine recommends the Yazhijiang brand.

Yield, quality, quality all vary greatly. As far as the most vulnerable screw barrels are concerned:

The low-end ones are cheap, not durable, and often replaced;

The high-end ones are more expensive, durable and not easy to replace;

In terms of depth, the low-end screw wears out quickly, and the output becomes lower and lower as the screw barrel wears the gap increases, and the quality of excessive particles of reflux material decreases; The high-end ** set is several times that of the low-end, of course, the wear resistance is also so high, the wear is small, the output is stable, the plastic regurgitation is less, and the quality of natural particles is also stable.

At present, the basic process of recycled plastic granulation is sorting, crushing, cleaning and dehydration (of course, these are dirty materials, and these links can be ignored for good material scraps); Then it is through the heating and friction of the screw barrel to melt the plastic, filter impurities through the screen and extrude the pelletizing or strand pelletizing. The basic process is like this, the granulator is not environmentally friendly, and the current electric heating is nothing, and the old-fashioned coal heating is polluting. The main pollution is the sewage produced by cleaning and the exhaust gas discharged from the granulation process.

The general production process of plastic granulator: feeding - melt extrusion - cooling - pelletizing - receiving - metering and packing.

Medium molding pellets are the basic link of plastic recycling, which is mainly used to convert waste plastics into plastic particles that can be used for processing through processing. China Plastics will further process these particles into various plastic products through blow molding, injection molding, calendering and other processes. Process flow of plastic recycling and granulation:

**、Classification - crushing and cleaning - thermoplastic extrusion molding - water cooling - pelletizing - bagging plastic plastic leading mechanical products are plastic granulators, rubber mills, plastic machinery, rubber equipment, plastic equipment, rubber equipment, mechanical equipment, experimental equipment and, single screw, twin screw mixer, water cooling, fan, TPR granulator, TPE granulator, TPV granulator, PET granulator, TR granulator, EVA granulator, PVC cable material granulator, PE granulator, PP Granulator, PS Granulator, Foam Granulator, Pelletizer, Crusher, ABS Granulator, Masterbatch Granulator, Calcium Masterbatch Granulator, PVC Wire Pelletizer, The production principle of plastic granulator is to use the process of high-temperature melting, plasticization and extrusion to change the physical properties of plastics to achieve plasticization and molding of plastics.

How to operate the first boot.

1. Before turning on the machine, first heat up for about forty or fifty minutes. Raise the temperature to the point where you pull the V-belt of the motor by hand until you are free; Pull continuously eight to ten times in the normal working rotation direction. Then continue to heat up for about ten minutes, and then turn on the machine, but continue to heat, because normal production needs to continue to replenish heat; Different temperatures are adjusted according to the different properties of plastics.

2. When the granulator is working normally, the temperature of the machine should be kept stable, and it should not be high or low. Near the vent hole, the temperature of the head part should be kept at about 200 (referring to material propylene and material B).

3. The feeding should be uniform and sufficient. The feeding speed of the machine and the feeding speed should be properly matched. Otherwise, the quality and yield of the pellets will be affected.

4. When the machine is stopped, the main engine should completely cut off the power supply. The head plug (with wrench part) must be removed. Preheat separately before the next use.

Precautions during the working process of the granulator.

1. Pay attention to the temperature change of the fuselage at any time, and when you touch the strip with clean hands without sticking your hands, the temperature should be raised immediately. Until the sliver touches the hand is normal.

3. When the bearing parts at both ends of the bearing chamber of the main engine are hot or there is noise, it is necessary to stop the machine for maintenance and add butter. During normal operation, the bearing chamber is buttered every 5-6 days.

4. Pay attention to find out the operation rules of the machine; For example, the temperature of the machine is high or low, and the speed is fast or slow, which can be dealt with in time according to the situation.

5. When the fuselage is running unstable, attention should be paid to check whether the gap between the coupling is too tight, and it should be loosened in time.

Plastic Pelletizing Machine - Precautions:

1. The granulator should run in the forward direction; Avoid inverting.

2. The granulator must not run on an empty stomach with a cool machine, and must be heated by the machine to feed the material, so as to avoid the phenomenon of sticky bars (holding shafts).

3. It is strictly forbidden to enter the iron and other sundries in the feed port and air vent of the granulator. In order to avoid accidents and affect production. Henan Hongxing is a granulator manufacturer recommended by the Sand and Gravel Association, and you can consult if you have any questions.

Matters to be paid attention to during the operation of plastic pelletizing machine.

1) When the operator fills the material, he must be optimistic, do not enter the debris in the material, and grasp the temperature.

2) If the material is not sticky to the die head when the machine is turned on, the temperature of the die head is too high, and it can be normal when it cools down a little, and there is no need to stop the machine under normal circumstances.

3) The water temperature should generally be 50---60, low easy to break, more than easy to stick, it is best to add half of the hot water at the beginning of the machine, if there is no condition, the pelletizing can be used to transport the pelletizer to the pelletizer for a period of time, and then let it automatically cut after the water temperature rises, so as not to break the strip, after the water temperature exceeds 60, it is necessary to circulate cold water inward to maintain the temperature.

4) When pelletizing, the strips must be pulled evenly before they can be put into the rolling roller, otherwise the pelletizer will be damaged. If the exhaust hole is outward, it proves that the impurities have blocked the filter, and the mesh must be stopped and replaced quickly, and the mesh can be selected from 40---60 mesh.