What s the deal with the freezer working non stop? 5

What is the reason why the freezer has been working without downtime.

1. The temperature adjustment is too low, that is, the temperature controller knob is placed in the super-cold position, which causes the temperature in the freezer to not drop, and then causes the freezer to not stop.

2. Temperature sensor.

If there is a problem, it may be that the temperature controller temperature probe is poorly placed, resulting in temperature imbalance, which is usually in high temperature weather.

3. The ambient temperature is too high or not conducive to heat dissipation, generally speaking, when the temperature exceeds 32 degrees, the freezer is very prone to non-stop. This is usually due to the low power of the freezer compressor or the cooling capacity.

Too little.

4. The face wall of the refrigerator is frosted, and during use, because of the incorrect placement of food, or the door is often opened and closed, the hot air is frosted when it meets condensation, which causes the freezer to not stop.

Improper adjustment of the expansion valve and outlet valve of the refrigeration cabinet, excessive refrigerant in the system, air in the refrigeration system, poor sealing of the valve plate assembly, and wear of the piston of the compressor cylinder liner.

The high-pressure output buffer pipe in the compressor is broken, or the screw fixing the tube is loose, resulting in the high-pressure pipe not exhausting, and the low-pressure pipe not suctioning, so although the compressor is running, it is not refrigerated.

Take a look at the settings to see if you can set it to rest mode, or ask the official website how it works.

Cause of the failureGenerally, this situation occurs because there is a problem with the refrigeration system of the freezer, and if the compressor has not stopped, but the temperature has been dropping, it is the thermostat of the freezer.

Something went wrong.

ResolutionGenerally, if there is such a problem, we have no way to repair, we need to contact professional after-sales personnel as soon as possible to repair, under normal circumstances, it is free to repair if it does not exceed the warranty time, even if it exceeds the warranty time, we must notify the after-sales personnel to repair it.

Because each freezer brand is different, its construction may be different, and it is the best way to let the after-sales personnel who produce it repair it.

The solution to the freezer in working condition all the time is as follows:

1. When adjusting the temperature of the refrigerator, it will not be changed after the adjustment is done, but when the refrigerator is running, its internal temperature is constantly changing, and when the temperature around the refrigerator is relatively high in summer, the temperature inside the refrigerator will also change, which may cause the refrigerator to stop because the temperature is too low, and the temperature of the refrigerator can be adjusted.

2. The thermostat of the refrigerator fails, which will make the refrigerator not stop, and this problem generally occurs in high temperature weather, because the thermostat of the refrigerator cannot feel the temperature change inside the refrigerator, and the thermostat of the refrigerator needs to be replaced.

3. The temperature around the refrigerator is too high and will also cause the refrigerator to not stop, when the temperature around the refrigerator exceeds 32 degrees, the refrigerator will appear such a phenomenon, which may be caused by the power of the refrigerator compressor is too small or the refrigeration capacity is too small.

Hello dear, the freezer has been running without stopping, it's okay, the refrigerator has been working without stopping, and the failure of the refrigerator's thermostat will also cause the refrigerator to not stop, but it won't, mainly because the thermostat of the refrigerator can not feel the temperature change inside the refrigerator and the control circuit board is faulty. There is a danger, the refrigerator does not stop the refrigerator does not stop the compressor has been dismantling the operation, this kind of situation is very easy to damage the compressor of the refrigerator, and the compressor is the heart of the refrigerator, that is to say, it will eventually affect the work of the refrigerator, I hope I can help you; Once again, I wish you good health and a happy mood! 

Summary. Cause.

First, the refrigeration is not completed.

The premise of refrigerator shutdown is that the internal temperature of the refrigerator reaches the user's set temperature. Until then, even if the refrigerator is fault-free, it will always be in operation. There are three situations that can cause a refrigerator to be trouble-free and not to be shut down:

1.A new refrigerator or a refrigerator that hasn't been powered on for a long time.

At this time, the internal temperature of the refrigerator is exactly the same as the room temperature, the refrigerator refrigeration is actually not as fast as we imagined, and it takes a certain amount of time to reduce the room temperature to more than ten degrees below zero - of course, the specific time required depends on the room temperature. Generally, a new refrigerator or a refrigerator that has not been powered for a long time will continue to work for at least 8 hours when it is first used.

2.The set temperature is too low.

The cooling rate inside the refrigerator is determined by two points - the cooling rate and the thermal insulation performance.

The refrigeration speed is affected by two factors, namely the compressor power and the ambient temperature. The higher the ambient temperature, the slower the refrigeration rate – the refrigerant dissipates heat slower (the refrigerant changes from high to low), and the refrigeration rate slows.

The thermal insulation performance is also affected by two factors, namely the refrigerator's own thermal insulation performance (the most common failure of the refrigerator's own thermal insulation performance is damaged by the sealing strip) and the ambient temperature. The higher the ambient temperature, the faster the refrigerator dissipates heat (the refrigerator temperature changes from low to high).

Therefore, in addition to the choice of the refrigerator itself, the ambient temperature also has a great influence on the cooling speed of the refrigerator. Therefore, if the ambient temperature is too high, we need to set the refrigerator temperature lower - the refrigerator set temperature is determined.

The freezer has been running without stopping, and there is nothing wrong with it.

Dear, it's fine.

Cause. 1. The premise of the refrigerator shutdown is that the internal temperature of the refrigerator reaches the user's set temperature. Until then, even if the refrigerator is fault-free, it will always be in operation.

There are three situations that may cause the refrigerator to be trouble-free without downtime:1The internal temperature of the refrigerator at this time is exactly the same as the room temperature, the refrigerator refrigeration is not as fast as we think, and it takes a certain amount of time to reduce the room temperature to more than ten degrees below zero - of course, the specific time required depends on the room temperature.

Generally, a new refrigerator or a refrigerator that has not been powered on for a long time will continue to work for at least 8 hours when it is first used. 2.If the set temperature is too low, the cooling rate inside the refrigerator is determined by two points - the cooling speed and the heat preservation performance.

The refrigeration speed is affected by two factors, namely the compressor power and the ambient temperature. The higher the ambient temperature, the slower the refrigeration rate - the refrigerant dissipates heat slowly (the refrigerant changes from high temperature to low temperature), and the refrigeration trapped lead sells slowly. The thermal insulation performance is also affected by two factors, namely the thermal insulation performance of the refrigerator itself (the sealing strip is damaged, which is the most common self-insulation performance before the failure of the thermal insulation performance) and the ambient temperature.

The higher the ambient temperature, the faster the refrigerator dissipates heat (the refrigerator temperature changes from low to high). Therefore, in addition to the choice of the refrigerator itself, the ambient temperature also has a great influence on the cooling speed of the refrigerator. Therefore, if the ambient temperature is too high, we need to set the refrigerator temperature lower - the refrigerator set temperature is determined.