What should I do if the refrigerator keeps working without stopping?

The fridge is always working non-stop. Normally, the temperature of the refrigerator does not change after adjustment, but the temperature inside the refrigerator is constantly changing during operation.

In summer, the ambient temperature around the refrigerator is constantly rising, and the temperature inside the refrigerator is also constantly changing. It is easy to cause the refrigerator to not stop because the temperature is too low and the internal temperature of the refrigerator cannot be lowered.

When you feel that the refrigerator is not turned off and the internal temperature is too low, you can turn the thermostat of the refrigerator counterclockwise and turn down the number of the refrigerator to reduce the internal temperature of the refrigerator, so as to eliminate the fault of the refrigerator.

Power-saving tips: The location of the refrigerator should be selected to avoid direct sunlight, facilitate ventilation, and keep a certain distance from the wall, so that the heat generated by the operation of the refrigerator can be dissipated.

Always check the tightness of the refrigerator seal. If the seal is deformed, it will affect the tightness of the seal and cause cold air leakage, thereby increasing power consumption. If the deformation is serious, it should be repaired and replaced in time.

After the refrigerator has been used for a while, some frost will be produced. If it cannot be defrosted regularly, it will affect the refrigeration effect, increase power consumption, and easily damage the compressor. Therefore, whenever the thickness of the cream exceeds 7cm, it should be defrosted. _

The main reasons why the refrigerator has been working without stopping are: 1. The ambient temperature is too high: most of them appear in summer, and the temperature can be set to a high point in summer, about 7 degrees.

2. Thermostat failure: When the internal thermostat of the refrigerator cannot feel the temperature change, and then cannot adjust the temperature of the refrigerator, it may also cause the refrigerator to be non-stop. 3. Insufficient refrigerator refrigerant or leakage:

The refrigerator compressor will continue to work without stopping in order to reach the specified temperature.

The reasons why the refrigerator has been working without stopping are as follows:

1. With the continuous increase of the ambient temperature, the temperature inside the refrigerator is also constantly changing, which can easily cause the refrigerator to not stop because the temperature adjustment is too low, and the internal temperature of the refrigerator cannot be lowered.

2. Thermostat failure: When the internal thermostat of the refrigerator cannot feel the temperature change, and then cannot adjust the temperature of the refrigerator, it may also cause the refrigerator to be non-stop.

3. When there is a problem with refrigerator refrigeration, when the refrigerator refrigerant is insufficient or leaks, the refrigerator compressor will work without stopping in order to reach the specified temperature.

Resolution

1. If the ambient temperature is too high or the temperature of the refrigerator is too low, the temperature setting can be re-adjusted, generally speaking, the temperature of the refrigerator can be adjusted according to the season, and the temperature can be set to a high point in summer, about 7 degrees.

2. If the refrigerator frost affects the work, it is recommended to defrost regularly, in daily use, you should pay attention to the storage of food, do not open the refrigerator door frequently, so as not to cause frost in the refrigerator.

3. When there is a problem with the refrigerator refrigeration or thermostat, it is recommended to give direct feedback to the after-sales service.

The reasons for the non-stop operation of the refrigerator may be: incomplete refrigeration, excessive load, new refrigerator or long-term maintenance and rental time without power, set temperature is too low, and the refrigeration function is damaged.

1. The refrigeration is not completed.

The premise of refrigerator shutdown is that the internal temperature of the refrigerator reaches the user's set temperature. Until then, even if the refrigerator is fault-free, it will always be in operation.

2. Excessive load.

Maintaining the temperature of the storage problem in the refrigerator also requires energy consumption. Therefore, the more contents of the refrigerator, the less frequent and shorter the refrigerator shutdown.

3. New refrigerator or no power for a long time.

Refrigerator refrigeration is actually not as fast as we think, and it takes a certain amount of time to reduce the room temperature to more than ten degrees below zero. Generally, a new refrigerator or a refrigerator that has not been powered for a long time will continue to work for at least 8 hours when it is first used.

4. The set temperature is too low.

If the set temperature of the refrigerator is too low, and the refrigeration does not reach the set temperature, it will continue to work without hitting the shutdown.

5. The refrigeration function is damaged.

The characteristics of the damage to the refrigerator's refrigeration function are: the refrigerator does not stop, but the internal temperature of the refrigerator remains the same. If you touch the outer wall of the refrigerator with your hands, you will not be able to get heated.

If your fridge is not working all the time, it could be a sign that there is some problem or malfunction with the fridge. This can be due to the following reasons:

1.Environmental issues. The ambient temperature around the refrigerator is too high, or the radiator on the back of the refrigerator is blocking air circulation, which can cause the refrigerator to work all the time and cannot be stopped.

Solution: Place the refrigerator in a well-ventilated place, away from the heat source, and regularly clean the radiator on the back of the refrigerator to ensure good air circulation.

2.The refrigerator is overloaded. If your fridge is filled with too much food or drink, it will cause the fridge to work non-stop and not be able to stop.

Solution: Unnecessary food or drinks need to be removed from the refrigerator to reduce the load on the refrigerator. Filial piety.

3.Refrigerator component failure. In the work of the refrigerator, there are many key components, such as refrigeration compressors, fans, temperature sensors, etc., if they fail, it will cause the refrigerator to work without downtime.

Solution: Professional maintenance personnel need to be called in for inspection and repair.

4.Fluoride leakage in the refrigerator. If the fridge has a fluoride leakage problem, this will cause the fridge to work non-stop.

Solution: It is necessary to call professional maintenance personnel to repair the Bingxiang box to stop fluorine leakage.

In short, if your refrigerator has been working without stopping, you need to check the above problems and take corresponding measures to solve them to avoid causing greater damage and unnecessary consumption to the refrigerator.

1. The refrigerator thermostat is faulty. If the refrigerator thermostat leaks fluorine or the temperature sensor cannot feel the temperature, it means that the control circuit board of the refrigerator is faulty, resulting in the refrigerator being in an uncontrolled state and working all the time.

2. Too much food is stored in the refrigerator. If there are too many things inside the refrigerator (especially around the thermostat), it can be a burden relative to the refrigerator because it has to work continuously to keep the refrigerator cool.

3. The temperature of the external environment is too high. This is because the outside temperature is too high, resulting in slow heat dissipation in the refrigerator, we know that the slower the refrigerator dissipates heat, the more it affects refrigeration, and the less easy it is to refrigerate, the refrigerator is likely to work all the time. In the same way, if the refrigerator door is not closed tightly, it may also cause the refrigerator to not stop.

Extended Materials. The fridge rings all the time, which is a drain on electricity. The refrigerator keeps ringing, indicating that the refrigerator is in the process of operation, the refrigerant of the refrigerator is flowing in the pipeline, the compressor is always working, and the sound is the sound of the refrigerator compressor colliding with the water box or copper pipe by vibration when it is working.

Classification of refrigerator noises.

1. Shaking noise.

The shaking noise is hard to distinguish, and most of the time it just makes a "buzzing" sound, which makes people think that it is the sound of the compressor working normally. But in fact, if this buzz is relatively loud, it may be amplified by the refrigerator foot.

Refrigerators are not close to the ground, but rely on four or six feet for support. If these feet are uneven, the normal vibration of the refrigerator compressor will cause the entire refrigerator to shake, and then amplify the sound of this shaking through the gap between the refrigerator feet and the ground.

Solution: The feet of the refrigerator can be adjusted, and it needs to be adjusted according to the slope and height of the ground until the whole refrigerator is kept level, and if necessary, a level can be placed on the refrigerator to assist in measurement. If the foot of the refrigerator is broken, it should be replaced in time, and the foot must not be cushioned with other things.

2. Pipeline noise.

A normal refrigerator will also wobble a little when the compressor is working. This shaking over time, combined with the aging of the parts that hold the pipes in place, can lead to loose pipes (there are many metal pipes inside the refrigerator). Loose pipes, in the midst of vibration, may come into contact with the refrigerator shell, resulting in a slight but continuous "knock" sound.

Generally, refrigerators that have been used for many years suddenly become louder and louder, which is basically the same kind of problem.

Solution: Open the refrigerator shell and re-reinforce the pipes. However, the shell of many refrigerators is sealed, and the shell needs to be cut directly to open the shell, and it cannot be installed back if it is reinstalled, so it can only be glued with tape.

Whether it is on the appearance or the cooling effect, it will have some impact. So if it is not too loud to bear, it is recommended not to carry out repairs lightly.

If the ice leaf does not work properly, there is a problem with a certain part, and the repairman should be asked to repair it symptomatically.

My question can be simply understood as the refrigerator compressor is always running, and you make such a judgment based on the noise of the refrigerator?

A common reason is that you have recently put a lot of room temperature ingredients around the refrigerator thermostat, and the internal temperature of the refrigerator has not reached the set value, so it has to keep the compressor in working condition; Another reason may be that the external environment is too hot, or you don't have enough space for the refrigerator to dissipate heat, causing the local temperature to rise and dissipate heat slowly, so the refrigerator keeps working.

Another reason may be that the components are broken, and you need to contact after-sales to troubleshoot the cause of the failure.

Instead of constantly scratching your liver for the small problems of the refrigerator, it is better to change to a trustworthy refrigerator, like the Siemens KA50NE20TI refrigerator I use at home, the temperature control ability of big brands is super reliable, there will be no misjudgment, it can be embedded in the installation design, and it will not increase energy consumption due to heat dissipation problems.

Take 10,000 steps back, in case there is such a problem in Siemens refrigerator, as long as you dial 400**, Siemens Home Appliances' strong customer service will arrange a technician to provide door-to-door service as soon as possible, and you don't need to go online to find the possible reasons yourself, and the after-sales service of big brands is so reliable!

1. The temperature of the refrigerator is set too low, resulting in the internal temperature of the refrigerator not being able to drop. 2. The internal frost problem is more serious, which affects the internal temperature. 3. The external temperature is too high, the power of the compression burner is small, and the refrigeration capacity is insufficient.

The refrigerator temperature is set too low, resulting in a non-continental drop in the temperature inside the refrigerator. The problem of frosting inside is severe, which affects the internal temperature. The external temperature is too high, the compressor power is early and small, and the cooling capacity is insufficient.

The thermostat is out of order and cannot be adjusted because it cannot sense temperature changes. The refrigerant is insufficient or.