CAD2002 can t be used, ask for help

Install a CAD2005 to go to it, if it doesn't work, you can find a system disk to repair it, and then install it.

Many software can no longer be used after the trial period, even if it is reinstalled after the royal load, there are only two solutions:

1.Reinstall the system.

2.Install the upgraded version, CAD2002 can not be used, then you can install it, it is recommended to install 06, to install it that can be activated, remember.

Normally, the installation error 240 may be related to your computer's operating system or other software programs, and it is recommended that you try the following steps to resolve it:1Check if your computer meets the minimum system requirements for CAD 2023.

2.Close all running programs and try to install CAD again If you already have other CAD software installed, uninstall the software and then try to reinstall CAD Check your computer's network connection to make sure you have access to the required installation files. 5.

If the above steps do not solve the problem, you can try to contact the development company or technical support team of CAD 2023 for more details and assistance. In conclusion, always make sure that your computer meets the system requirements of the software and follow the proper installation steps and procedures before installing any software.

Please point out that I searched for the relevant chopping round modification measures in the mess. I have carried out virus detection and killing in the computer, patched system vulnerabilities, and installed other versions of Auto CAD, and I have tried to crash in the spring, and the same problem has occurred. If you ignore the 2908 error and continue the installation until the end, the 1935 error will appear.

Is there anything else to do but reinstall the system?

I installed the 2005 version, and I've tried uninstalling it all and deleting the folders but it still doesn't work. Now you have to reinstall the system. I suspect that the virus infected three files of the system32 file of the C drive.

Auto CAD cannot run after being deleted by Kingsoft Poison. I get a 2908 error when I uninstall and reinstall, and the system repair doesn't work.

A netizen told me that finding the change in the search will solve the 2908 error. But still to no avail.

Three files on C drive were infected with viruses as a result.

The system can be installed after reinstallation. Thank you for your suggestion.,I didn't do ghost last time I installed the system.,So there's a lot of software to install for system reinstallation.,I'm tired of thinking if there's any other way.,It seems that until now I haven't found any easy way to solve this problem.。

You try to uninstall the CAD completely, reinstall it, and remember to uninstall it all.

If that doesn't work, reload! ~

Then just order it and reinstall it to waste 2 hours.

Remember to ghost after reinstalling

If CAD 2006 is not working, there are several possible reasons and solutions:1Hardware issues:

Check that your computer meets the system requirements for CAD 2006. CAD 2006 requires a high level of computer configuration, including CPU, memory, and graphics card. If your computer does not have sufficient hardware, CAD 2006 may not work.

2.Software Issues: Check whether the CAD 2006 installation is correct and complete.

If there are corrupted or missing files, CAD 2006 may not function properly. You can try reinstalling CAD 2006 to resolve the software issue. 3.

Operating system issues: CAD 2006 only supports Windows XP and Windows 2000 operating systems, if your computer is running a different operating system, CAD 2006 will not run. 4.

Conflict Issues: If you have other CAD software or Tucha jujube software running on your computer, CAD 2006 may not run due to a cracked conflict. You can try closing other software and running CAD 2006 again.

Change the CAD installation files to a different folder, that is, put those installation files into a simple folder, for example, put them in the cccad2006 directory of the D drive

The 2006 installation package is too old.,Change the new version.,20's are out.,Don't have to 04 06 classic hard to use.。

The user accidentally deleted the DLL file of the dynamic link library in the program installation directory, resulting in an error that could not find the necessary files when the program was started (this situation is not universal, but it is also one of the reasons).

The computer is infected with Trojan viruses, although most of the anti-virus software has tended to be humanized, once some Trojan viruses are found to bind the system program, there are still many anti-virus software that adopt a one-size-fits-all approach, direct.

Deleting these maliciously hijacked system programs (which may contain DLL dynamic link library files) causes the system or application to lack the necessary DLL dynamic link library, resulting in the problem that the program input point cannot be located on the dynamic link library ().

This situation is relatively common, and most netizens are caused by this reason).

When the software or game is updated, the DLL dynamic link library file that should have been written or overwritten normally is not updated successfully due to unexpected power failure, restart, writing error, etc., resulting in the software or game missing the necessary DLL dynamic connection library file during operation and reporting an error.

Step 2: Find out the tips.

Unable to locate the wrong message on the dynamic link library at the program input point, and record the missing information that the system prompts.

Step 3: Search for the information you have recorded, enter the DLL suffix in the search), try to pass the network ** most of the system dynamic link library dll files can be reached through the network **), keep ** to the DLL to the U disk or the specified file directory, if it is a system program (such as: system driver loading, media play**, etc.) error, press the F8 key on restarting the computer to enter the system security mode, and ** Copy the DLL file to the system32 folder in the windows directory in the C drive, and then restart it to solve this problem; If the game program is missing a DLL, you need to copy the DLL to the specified location in the game directory (due to the large number of game categories, the required DLLs and locations are different).

Trying three steps doesn't resolve the issue of not being able to locate the program's input points on the dynamic link library, and you should consider reinstalling your system, software, or game.

So,That's the trouble of Senhui code.,It's better to reinstall the software.。