Can you remove the stove after the new house is renovated?

In the process of renovating the new home after moving in, dismantling the stove is an issue that needs to be carefully considered.

In Feng Shui, the stove is one of the important elements in the home, which represents the stability and health of the family. As a result, removing the stove may be considered an unlucky act. However, this does not mean that the cooktop should never be dismantled.

If the stove needs to be removed, a suitable date can be chosen to avoid adverse effects.

In addition to Feng Shui considerations, removing the stove also needs to consider the actual situation. For example, if the cooktop is built on a load-bearing wall, demolition may have an impact on the structure of the house. In this case, it is advisable to consult with a professional architect or structural engineer before proceeding with any demolition.

Overall, if the stove needs to be removed, the decision should be made based on the actual situation and relevant knowledge of Feng Shui to ensure safety and avoid adverse effects.

The cooktop can be dismantled.

Dismantling the stove is particular, and it can be dismantled on a good day.

Feng Shui. The stove should be placed against the wall, and the owner has a backer behind him when cooking, which means that the family is stable and healthy. The stove used to be called a pot table, which is a platform that needs to be operated when cooking.

Make a brick block, and leave the front empty as a chimney. The back is left as a stove eye for adding firewood. Leave a large circle on top and make a large pot on top.

Do I need to disassemble the stove for the installation of a new gas stove1Unpack the stove and check the stove's body label and gas usage type. It is generally marked as one of the three gas sources of liquefied gas, natural gas and artificial natural gas.

Make sure that the type of furnace gas labeled is the same as the type of gas in your home. 2.Determine if the opening size of the kitchen cabinet matches the opening size of the stove.

For cabinets with too large openings, the stress part of placing the furnace on the upper panel is less, and it is easy to damage the panel; The error between the opening size of the kitchen cabinet and the length and width of the opening size indicated on the stove itself must not be greater than 15mm. If the opening size is too small, the gas stove cannot fit into the cabinet hole, and the hole spacing needs to be re-enlarged. 3.

Install batteries (large batteries No. 1, some cooktops have two batteries); Then put the fire separator (fire cover) of the stove, and some stoves have two rings and three rings of fire. Remember to put all the fire lids in place, especially the fire head in the center. Then press the stove switch and see if you hear a click.

Click. Click. Click.

sound, or seeing an electric spark in the center of the gas stove, indicates that the battery ignition system is installed properly. 4.The gas joints installed with gas pipes, built-in gas stoves, and built-in gas stoves are divided into hose fittings and threaded fittings.

Most stove manufacturers design their stoves as dual-purpose fittings, i.e. they can be connected with a hose or threaded pipe (but when connecting the threaded fittings, you need to remove the fitting nut that is lifted at the location of the stove fitting and connect the pipe in your home directly to the threads of the gas stove). If the two gas stoves you buy can't be connected, you'll need to go to the hardware market and buy an adapter for proper installation. 5.

After connecting the joints, close the group, soak the laundry detergent with a rag and soak it in each joint or trachea, then open the air valve, and then press the furnace switch normally to ignite and see if there is any bubble leakage in the trachea. The stove is installed!