The little father wants to refresh the wall of the living room with powder, and buy a certain brand

You're talking about a certain brand.

The latex paint wall re-copy new wallpaper method is as follows:

1) Prepare the gadgets that need to be used to paste wallpaper, and then measure the size of the wall.

In general, tools like scrapers, cutters, rollers, tape measures, glue, sandpaper, gloves, sponges, brushes, buckets, etc. are all necessary tools. And determining the size of the wall can determine the size of the wallpaper, the number of sheets, etc.

2) Treat the wall. This is an important factor in determining the effect of applying wallpaper directly to the walls of latex paint.

In addition to removing dirt from the wall, if there are cracks and holes on the wall, it is necessary to fill them with gypsum powder. By the way, the wall where the wallpaper is posted must be dry, you can do a film experiment, and the wall without moisture is really dry. After that, we can make the wallpaper glue.

3) Crop the wallpaper.

Cut out the desired wallpaper size according to the length, width and height of the wall that has been measured. Here I would like to remind you that this step is the most careful in all the processes of painting latex paint wall wallpaper, because you have to ensure that the flower shape and size between the wallpapers are consistent.

4) Paste wallpaper.

After cutting the wallpaper, we started to post from the corners. At the same time, hang the paper with a scraper to squeeze out the excess glue and make the wallpaper stick more firmly. If there is glue stuck to the pattern of the wallpaper, you can use a sponge to gently pat it dry. At the end, remember to cut off the extra corners.

Jiangmen Lanfubao teaches how to deal with the painted latex paint wall.

No need to shovel off the latex paint, will not affect the floor and ceiling base film that has been made, is a professional wall treatment material used in the construction of wallpaper and wall cloth, and can form a dense protective film on the wall surface after painting, which can effectively prevent the extravasation of excess moisture, moisture and alkaline substances in the base layer, and play a moisture-proof and mildew-proof role on the wallpaper and wall cloth; At the same time, the base film can also strengthen the base layer, prevent the base layer from pulverizing, and make the base layer stronger and more durable.

1. For putty walls, the anti-alkali formula base film with strong anti-alkali function is selected, which can effectively block the erosion of the wallpaper by strong alkali substances in the putty and avoid the yellowing of the wallpaper.

2. Latex paint wall, the use of latex paint special base film, to solve the problem of difficult construction of latex paint wall in the past, specially designed for latex paint wall, no need to remove the original latex paint layer, can be directly painted on the latex paint wall.

It has the properties of super alkali resistance, waterproof and breathable, antibacterial and mildew-proof, and sealing micro-cracks, and can be closely combined with the latex paint layer of the wall to prevent the latex paint layer from chalking and improve weather resistance.

Quickly dries and enhances the ease of construction.

of milk.

Bai glue paint, generally 3-5 years is no DU problem, the most afraid is that the quality of the material is not good, the consequence is that the inside is easy to powder, peeling. The answers to A and B are correct, you can find a piece of inconspicuous place on the wall to stick the wallpaper directly, if the wallpaper dries after a few days, the effect is OK, then, congratulations, you can directly paste the wallpaper on the wall, if the wallpaper blisters and falls off, then you can only do it according to the "B plan".

And there is; You can beat the place to be pasted with sandpaper, so that the labor cost is less, the material cost is also less, and the effect is the same as the A B method.

The correct way is b. However, after removing the original wall putty, before re-approving the putty, it is necessary to roll the construction glue water. This can increase the adhesion of the re-batch putty, which is necessary to prevent the occurrence of hollowing.

Then you can follow the steps of the wallpaper step by step.

- I read it wrong just now, it should be b).

If you brush a layer of base film (or also called wallpaper mate), the base film can close the wall, waterproof and moisture-proof, increase the adhesion between the wall and the wallpaper, and wait for a day after brushing the wallpaper after brushing. Now there are some wallpaper glue that already has a base film component, so you don't need to brush the base film alone, and you can paint the wallpaper glue directly to the wallpaper.

Shoveling off the wall skin will not affect the ceiling, but the floor will definitely be dirty, so you can do some protection in advance.

The ** of latex paint has between 200-2000. There is not much money in the square, plus the salary, nearly 20 yuan and 1 square, but simply doing latex paint, I personally feel more monotonous. Wallpaper is difficult to say, cheap wallpaper as long as 10 pieces less, but the quality of that wallpaper is seriously bad, I have constructed, the process of sticking was actually soaked in glue to rise, 2-3 cm wide.

Hehe. However, good wallpaper will not have these problems, traditional wallpaper compared to liquid wallpaper, the texture is more delicate, liquid wallpaper as an emerging product of wall decoration, must have his merits. No warping, no cracking, no joints, is incomparable to traditional wallpaper.

And in the secondary construction, liquid wallpaper is also very convenient.

1. The original latex paint wall cannot be directly pasted with wallpaper.

2. The wall must be moistened with water and the original latex paint wall surface layer must be removed.

3. After making another layer of putty leveling layer, polish it with sandpaper and remove the floating ash layer.

4. After the above process is completed, paste wallpaper on it.

5. This must be done to ensure that the wallpaper is firmly bonded. Otherwise, the paste will not be firm and the skin will fall off.

The wall painted with latex paint has been leveled and polished, etc., it is very convenient to paste wallpaper, brush the base film on the wall, and wait for the base film to dry (about three or four days) You can directly paste the wallpaper.

From **, it must be expensive to lay wallpaper.

From the water-resistant, scrub-resistant pvc wallpaper is very good, pure paper wallpaper and latex paint are average, they can only be said to be "scrubbing", by no means like JS propaganda "scrub-resistant". Resistant to bumps, none of the three, latex paint can be repaired, but the effect of repairing is not good. The service life is similar, and the latex paint will change color after a long time, but it is not obvious.

In terms of aesthetics, wallpaper should have an absolute advantage, and latex paint is out of reach.

For environmental protection, it is better to paint latex. Because a large amount of sizing must be applied behind the wallpaper, the release cycle of harmful substances must be extended; The release cycle of harmful substances in latex paint is relatively short, and the release effect is much better. So my recommendation is to use latex paint!

It's also not expensive. You can also try seaweed mud paint! Healthy and environmentally friendly, but the price is higher, but the effect is definitely different!

It's all good, the current latex paint and wallpaper glue are more environmentally friendly, and there is no problem with safety.

Latex paint is cheap and practical Wallpaper is expensive and dirt-resistant.

It just depends on the preference.

It is recommended that you choose latex paint, which is clean, practical, and convenient if you want to put on wallpaper in the future.

If you paint it, the time will be kept for a long time, and the wallpaper will not last that long, and the only advantage is that you can change the style after a few years. Painting is to consider that the home has been renovated for 20 years.

Choose a wallpaper because it's safe.

1 First of all, if the construction area of your house is 84 square meters, if the wall has to be sprayed, a bucket of 5L is definitely not enough. If you spray it before it dries once, it is easy to make the putty layer suffer too much water, and the putty becomes wet and soft, and the paint will volatilize water in the case of slow drying, and the ingredients left on the wall will shrink, causing the paint surface to crack and peel, especially the corners and corners and other problems are more prominent. And after finishing the surface dry over and over again, gently polish it below 1.7 meters, and the effect will be better.

If you ask the master of spray painting, generally large brand paints will require employees to wait for the surface to dry and polish after spraying.

You can go to the place where you buy paint and ask, they will give you suggestions, and you can also calculate the approximate wall area, how many square meters they can generally paint a bucket, you can calculate. It's best to wait for one layer to dry before brushing it a second time.

Are you talking about a wall area of only 84 square meters? 84 square is enough for about two barrels, and it is best to spray it again after an interval of one or two hours before the first time it is not dry, because it may flow if it is not dry

Is the primer and topcoat not separated? What is the concept of a barrel of 5L? It is recommended to primer around. The same amount of topcoat is sufficient. It is best to dry one layer thoroughly and then do the second layer, and the effect will be better if it is sanded properly!

I think it's good to paste wallpaper, because no matter how professional the putty worker is, the wall will be partially cracked after a year or two of decoration, and there is no worry about this after pasting the wallpaper, and there are many types of wallpaper to choose from, and it is more convenient to replace.

Both wallpaper and latex paint have their own advantages and disadvantages, which need to be decided according to personal preferences and usage needs.

Advantages of latex paint: simple construction, wide range of application, versatile style, non-toxic and environmentally friendly, cheap.

Disadvantages: single color and texture.

Wallpaper advantages: outstanding decorative effect, diverse styles and colors, strong sense of art, slightly higher.

Disadvantages: **Expensive, exaggerated decorative effect, not suitable for a wide range of use.

Red apple emulsion paint has good environmental performance, very low VOC content, a complete range of products, and is sold in major stores, and consumers are welcome to come to buy.

The latex paint texture is single, the wallpaper texture is good, and the expenditure is relatively more, depending on your own preferences and budget

From a comprehensive and practical point of view, it is better to use latex paint.

So in terms of environmental protection, latex paint is better than wallpaper.

It can be brushed directly, it will not crack, and the steps for renovating the old wall are as follows:

1. Clean up the old wall: The general old wall will have problems such as oil stains, floating ash, hollow drums or cracks, and low water absorption, so you need to do some cleaning work on the wall. The old wall should be removed from the floating ash first, and the sand and warped skin should be removed; For the oily parts, the original coating should be removed first, and if it cannot be removed, it should be thoroughly cleaned; After the wall is cleaned, scrape two more with putty.

2. Scraping putty: It is better to choose putty with high particle fineness and hard texture, and you can also add a certain amount of white latex to the putty to improve the hardness of the putty.

3. Grinding: Try to use finer sandpaper, generally softer putty (such as 821) with 400-500 sandpaper, hard texture (such as wall lining, easy to quack) with 360-400 is better, if the sandpaper is too coarse, it will leave deep sand marks, and the paint can not be covered. After sanding, the wall must be thoroughly cleaned to avoid too much dust and affect the adhesion of the paint.

The difference between bumps and bumps does not exceed 3 mm.

4. Primer: The primer must be brushed evenly to ensure that every place on the wall is brushed, if the wall eats a large amount of paint, the primer is best to add a little more water to ensure that it can be painted evenly. Don't think that just because it's a primer, it's okay to use a roller that is a little worse, the effect of the primer will directly affect the effect of the topcoat, and you should use a roller with the same texture as the topcoat.

5. Repair: After the putty is polished, there will be some flaws (pit eyes), which are generally difficult to see, only after brushing the paint will be obvious, at this time it is necessary to make up, pay attention to the repair must be polished and smooth, and then brush it with a primer with a little more water, so as not to have color difference when brushing the topcoat because of the different draught with other walls.

6. Topcoat: The suitable for lacquering here is the ordinary lacquering work, do not add excessive water, which will affect the thickness of the paint film, feel and the hardness of the paint film, try to choose a better tool, the hair of the drum is not too short, but it must be fine, so that the paint film will feel delicate, and the painting mainly pays attention to the corner of the wall, the indirect stubble part of each roll and the direction of the paint.

7. Maintenance: The latex paint will dry after 4 hours after painting, but the dry paint film has not reached a certain hardness, which is to care, very simple, do not scrub or touch the wall within 7-10 days.

Precautions for wall renovation:

1. If the original melamine paint is made, remove the paint film and re-scrape the putty. Applying emulsion paint directly on it is prone to peeling off.

2. It is necessary to pay attention to the uniform grinding of putty on the old paint film, otherwise there will be a phenomenon of paint film blooming after construction due to different absorption of the substrate.

3. Recoat the old latex paint film again, you need to deal with cracks and warped skin, for hair-like cracks, you can directly cover the fine cracks with elastic products, and for larger cracks, it is recommended to fill them with primer mixed powder, smooth and polish evenly after the construction is low, and the topcoat is low.

As the title of the second-hand house decoration I want to paint latex paint directly on the original latex paint wall But some people say that this will be violent, is there a professional to answer ps: There are small cracks on the wall Do you need to add bandages or kraft paper to remedy? Now there is a painter who has no work on hand and wants to simply brush the house.

Depending on which aspect you consider, latex paint is more environmentally friendly than wallpaper, wallpaper formaldehyde emissions are 5-15 years, latex paint formaldehyde content is low, and emissions are generally 1-3 years.

Depending on what you think, it is recommended that you go to the market to buy latex paint yourself and find a worker to paint, so that the worker will not adulterate you.

It is recommended that you use big brand wallpaper of more than 40 yuan for wallpaper, and glue glue with glutinous rice.