Do I have to keep working on the automatic assembly line? Unpleasant

Tired, not only physically tired, but also mentally tired.

When I was a freshman in the summer vacation, I went to Hangzhou to work in the factory and did assembly line work, and I stayed for a week and left, bored and tired, and many of the girls who went in with me didn't work long before leaving. Before entering the factory, you still need an interview, which is not interesting, and I don't know what it means to go through such a process, and there is no technical problem. When I entered the factory, I arranged a dormitory for you, a room for a few people, bunk beds, the same as a university dormitory, the difference is that I am not familiar with everyone.

Clothes can't be made of metal, so you either prepare your own clothes before you go, or you spend some money to buy clothes when you get there, I didn't know anything before I went, and I bought them when I got there. 1: The assembly line is very boring, almost repeating a certain action, I was doing the quality inspection of a certain part of the mobile phone, and someone will check it from time to time; It can also be cold inside, you have to wear a coat when you go inside, the first day is not clear, and people can freeze to death.

And I can only stand and can't sit (this should depend on the post), and I am very tired at the end of the day. 2: The food is not appetizing.

The daily meal was not very delicious, but I remember that the soup was very thin, like water, and I was very thin at that time, but I became thinner in a week. 3: There are shift shifts.

There are shifts for you, and there will be a few night shifts a week and a few days of day shifts. 4: No one talks, no small talk is allowed at work, it's too bad at the end of the day, and the two of you may not be able to get together with the people you want to be familiar with, so you are alone at work and dinner.

For various reasons, I resigned after working in the factory for a week.

Maybe everyone has different feelings about assembly line work, but I think assembly line work is not suitable for me. If you don't like the same job, you don't like to be alone during work or at mealtimes (of course, if you have a social disorder, you shouldn't be alone. I don't recommend going to the assembly line to work.

And there is no technical content in the assembly line work, you can only learn your online knowledge at most, and the rest is basically not learned, and after you come out, you may still face the problem of what job to find and what position to find, and you can hardly learn any knowledge in it. If you can, it is advisable to find a job where you can learn so that even if you don't want to stay in this company in the future, you can change to another company with the same position or similar position. Everyone's pursuit and ideas are different, this mainly depends on your own ideas, you can consider everyone's opinions, I hope you can find a job that suits you.

Tired. It's flowing too fast. Most people can't stand it. So. That is. That's it. There is no way. Sometimes it's also very helpless.

The reason why assembly line workers can't work for a long time is: in addition to going to work normally every day, they also need to work overtime, and the working hours are too long, and the work is relatively tiring; The assembly line is an infinite cycle of work, which is very boring and labor-intensive; The assembly line management is harsh, and some workers are difficult to adapt to.

But it is true that young people go to work in factories and do more harm than good. Because first, young people don't make much money when they go into factories. Working on an assembly line, the content is exactly the same every day, and you're only working on a small part of the process, and you won't be able to do the rest.

If the factory closes down, he can only find another factory, but he can only work on the assembly line, and the salary will decrease with age. Second, you can't learn anything when you go into the factory, and you don't have a future. After staying in the factory for a long time, people will adapt to the life of these two points and one line, and the communication with the outside world will be less and less, so the communication ability and interpersonal communication will be affected, and working on the assembly line only means that you are familiar with a certain process on the production line, but it does not mean that you are proficient in the entire production line.

So when he gets older, this person still has no skills, so he can only continue to sell his physical strength. Third, the future development direction of the factory will be to replace workers with robots. There are many factories where robots have appeared, and the technology is very mature, and now it is not widespread because people's employment is taken into account.

But in the future, these robots that can work on the assembly line will definitely become widespread, and by that time the workers will be laid off and unemployed. After all, the robot can work when plugged in, and the cost is so low and the efficiency is very high, as a boss, you must use it. Therefore, if a young man still wants to go to work in the factory, it is really asking for his own death.

But not entering the factory does not mean that this person will be profitable. In the society, if he doesn't work hard, he still has nothing to eat, so young people try not to go into the factory, they can go to some regular enterprises to work, where they can learn a lot of new knowledge, and it is possible to contact more people to accumulate contacts, which is also helpful for their future entrepreneurship.

Why are more and more young people reluctant to work in factories? On the one hand, young people have more choices, not necessarily have to enter the factory, on the other hand, it is too hard to enter the factory, not to mention the low salary, the 12-hour work system, or even the two-shift work system, so that many people can not bear it.

The new female employee said that she had to deal with the machine for 12 hours a day. Every few minutes, someone urges me to hurry up, and I feel that going to work is more uncomfortable than going to the grave.

The factory works 12 hours a day, and it is more uncomfortable to go to work than going to the grave, and the general electronics factory also wears dust-free clothing, and it is very inconvenient to put on and take off dust-free clothing. You have to go to the toilet barefoot when you have an urgent need to urinate, can you feel that feeling? I figured it out when I went to the toilet and left directly.

On the first day of trial work in the third ring workshop, I wore a dustproof suit and a mask to go through the security check and entered the workshop, the noise was really loud, and the conversation between colleagues was often not heard, and I couldn't bring my mobile phone in. Spend three or four hours in a noisy environment, go out to the toilet and drink water, and take off your dust suit. Changing slippers was really troublesome.

If you choose, don't go to the factory to be a general worker, 10 years of assembly line, bamboo basket water is empty. This is not alarmist, especially for men, making screws in factories and driving a car bed is a waste of time and burning youth.

There are only endless classes on the assembly line, there is no time to do anything else, although going out to work only to make money, but people will have all kinds of ideas, occasionally enjoy life, relax themselves, if the body and mind are always in a tired state, one day it will collapse, and then the bottom of the life also needs a little lubricant to stimulate the motivation to work.

The factory assembly line is to make life-saving money. Work for ten years, save some money for the first seven years, and return to zero for the last three years. If it is saved in the next three years, it will be returned to zero after two years. Not to mention ten years, a hundred years is the same. Don't go to the hospital.

Summary. The work of the assembly line must be tiring, and the work of the assembly line is a simple action and a constant burden.

The work of the assembly line must be tiring, and the work of the assembly line is a simple action and a constant burden.

1. I work more than 11 small minutes every day, and I have been working non-stop while standing on the bridge, and there is no easy position. The managers are a little better and can rest.

2. The work of factory assembly line workers is very hard, their grip and punch work is very single, basically the same action is repeated every day, and the number of days to be carried out is very large, and the number of work mountains is very boring.

Recently, there has been a relatively popular word phenomenon on the Internet called lying flat, which I believe also reflects the psychological state of many young people at present. Especially this phenomenon is particularly obvious in China's manufacturing industry, after all, China's manufacturing industry has fallen into a labor shortage for a long time, so young people now do not like to enter the factory, because everyone prefers to choose some free time work. Why are young people today reluctant to work in factories?

What is the reason for this?

The working hours are long and the work intensity is high, and the income is not proportional to the effort.

Friends who have worked in factories know that especially like working in some large enterprise factories, overtime has become a common phenomenon, generally more than 10 hours a day, and even on holidays and weekends there is no free time, because entering the factory to work is a labor-intensive industry.

Workers are not paid well, which is one of the main reasons for the long-term loss of labor in the manufacturing industry.

The work is boring and boring, the workers are concentrated in a large workshop to work, they are facing a non-stop assembly line all day long, the whole person is like a robot and keeps doing the same thing repeatedly, young people are often yearning for freedom, they do not want to be too confined in a local space, so they want to break through themselves, yearning for the colorful world outside.

Mechanized work does not see the future, after all, working in factories and engaging in assembly line work, in the long run, this does not help young people to improve their skills, on the contrary, if they have been engaged in boring mechanized work, their social experience and skills have not been greatly increased and improved, on the contrary, it can only accelerate the process of their gradual disconnection from society.

Nowadays, with the continuous development of society, many new industry job options have been derived, and these positions do not have too many educational requirements, so many young people also rely on their own talent and efforts to better achieve themselves.

Because there is really no interest, working in it in the dark every day, just like a robot, it is very easy to wear down people's patience, and there will be no interest.

Because the assembly line is hard and tiring, there is no rest time, and I keep doing the same thing. Young people are very unwilled and impatient, so they hate this type of work.

First, today's young people are more free and don't want to work all the time like robotsSecond, the assembly line work is more tiring, and many people can't bear the hardship.

Because assembly line work is very tiring, and there is no technical content in assembly line work, young people will feel that such work is meaningless, and the salary is not very high.

Because the low wages of assembly line operators are not yet free, young people are reluctant to go, because young people yearn for freedom.

Because the work of assembly line operators is monotonous and has no future, young people are reluctant to enter the factory.

The so-called mark interval distance is the distance between the marks made on the belt of the assembly line, and the operator is expected to complete the work according to the speed at which the mark flows and place it on the belt line;But the strip line is not marked, and the length of the board is used as the marking distance. Why use a conveyor belt?In addition to transporting goods, there is also a function of semi-forcing workers to complete the work according to the plan, but instead of blindly speeding up to try it, it should be calculated according to the above formula.

Assembly line, also known as assembly line.

A mode of production in industry.

Refers to each unit of production.

Focus on a single clip to improve productivity and productivity.

According to the conveying mode of the assembly line, it can be roughly divided into: belt assembly line, plate chain line, double speed chain, plug-in line, mesh belt line, suspension line and drum assembly line. Generally, it is composed of traction parts, load-bearing components, driving devices, tensioning devices, reversing devices and supporting parts.

The assembly line has high scalability, and can be designed according to the needs of the conveying capacity, conveying speed, assembly station, auxiliary components (including quick connectors, fans, lights, sockets, process kanban, storage table, 24V power supply, air batch, etc.), so it is widely welcomed by enterprises.

The assembly line is an effective combination of man and machine, which fully reflects the flexibility of the equipment, and organically combines the conveying system, accompanying fixture and special machine and testing equipment to meet the transportation requirements of many varieties of products. The transmission mode of the conveyor line can be synchronous transmission (forced type) or non-synchronous transmission (flexible type), and the requirements of assembly and conveying can be realized according to the choice of configuration. Conveyor lines are indispensable in the mass production of enterprises.

The so-called mark interval distance is the distance between the marks made on the belt of the assembly line, and the operator is expected to complete the work according to the speed at which the mark flows and place it on the belt line;But the strip line is not marked, and the length of the board is used as the marking distance. Why use a conveyor belt?In addition to transporting goods, there is also a function of semi-forcing workers to complete the work according to the plan, but instead of blindly speeding up to try it, it should be calculated according to the above formula.

1.Integrated production process, a variety of stations can be arranged on the assembly line to meet production needs;2.High scalability, according to the needs of the factory, the assembly line can be designed to meet the production needs of the product; 3.

Saving the production cost of the factory, the number of production workers can be saved to a certain extent, and a certain degree of automated production can be realized, with little investment in the early stage and a high rate of return.