What is the reason why the refrigerator compressor keeps working?

There are actually two reasons why the refrigerator keeps running all the time. You should all know that refrigerators can be cooled because of refrigerants.

exists. Why does the compressor of the refrigerator stop working? Because the refrigerator has reached the set temperature and no longer needs to be cold, it stops working.

However, if the refrigerator does not reach that temperature, the compressor will not work all the time? Therefore, it can be inferred from this situation that the refrigerant is gone, or there is not much left. It can't be a good refrigerant, so the compressor can't get the refrigerator to that temperature all the time, so it has to work non-stop until the refrigerator can reach that temperature.

2 Reason 2: Refrigerator thermostat.

Fault. This is because the refrigerator's thermostat cannot sense the temperature change inside the refrigerator and the control circuit board is faulty. This usually happens during the hot summer months.

Solution: You can check whether the thermostat is sticky, if it sticks, it will also cause the failure of the compressor not to stop, at this time, you can unplug the power supply, rotate the temperature control knob back and forth, and force the contacts to separate. If you can't find the specific reason for the thermostat, you can only contact the staff to help check it.

1. The thermostat adjusts the temperature too low, and the temperature is generally higher in summer, and the temperature in the refrigerator is adjusted too low to the set temperature, and the compressor will naturally work non-stop, not to mention the waste of electricity, and the life of the refrigerator will be greatly shortened.

Check whether the evaporator in the refrigerator room has severe frosting, if the refrigeration is normal and the frost is severe, the temperature should be turned up so that the refrigerator will shut down. In addition, the adhesion of the thermostat electrocution will also cause the failure of the compressor not to stop, so the power supply should be unplugged, and the temperature control knob should be rotated back and forth to force the contacts to separate. If not, ask a professional maintenance personnel to replace it.

2. The ventilation and heat dissipation of the refrigerator is not good, so a certain amount of space should be left around it, and the heat dissipation should be cheaply ventilated and dissipated, so as to improve efficiency. If the condenser (radiator) of the refrigerator is rear-hung and the temperature is high in summer, the dust on the radiator should be cleaned in time to improve the heat dissipation efficiency.

3. Whether the refrigerator door seal is well sealed, if there are gaps in aging or deformation, it should be cleaned first, and then corrected with a hair dryer, or some sponges or other elastic items should be padded inside the door seal at the deformed place.

Hello, 1If the refrigerator refrigerates normally and the compressor doesn't stop, then the temperature control parts may be broken. 2.

The compressor does not stop and cannot be refrigerated, which is the cause of the failure of the refrigeration system and the continuous operation of the compressor. In addition, when the compressor of the refrigerator is running, unplug the power plug and plug it in immediately, because there is a high and low pressure difference in the refrigerator refrigeration system, that is to say, the compressor has a high and low pressure difference, so the compressor can not start, and after a period of time, the pressure is balanced, and the compressor can be started. Generally, it is best not to plug in the plug within 5 minutes of unplugging, the compressor is difficult to start, and it is easy to damage the compressor.

Looking forward to Muzi.

Hello, I am glad to answer for you that there are many possibilities for the refrigerator compressor to keep working, the first may be that the temperature sensor is broken, causing the compressor to keep working, and the second refrigerator door is not closed, causing the refrigerator to be refrigerated all the time to reach the control temperature. Hope mine satisfies you!

Hello, the refrigerator compressor has been working non-stop because of the following reasons:1The temperature is too high:

If the temperature inside the refrigerator is too high, the compressor will work all the time to maintain the temperature. This can be caused by the refrigerator door not being closed properly, not being properly sealed, or having too many items inside the refrigerator that cause poor air circulation. 2.

Compressor failure: If the refrigerator compressor fails, it can cause it to work all the time without being able to stop. This can be caused by damage to the internal parts of the compressor, faulty circuits, etc.

3.Clogged condenser: The condenser is an important part of the refrigerator, and if it is clogged, it will cause the compressor to work all the time.

This can be caused by excessive dust in the condenser, clogged filters, etc. 4.Controller Failure:

The controller of the refrigerator is an important part of controlling the work of the compressor, and if there is a failure, the compressor may be working all the time. This can be caused by faulty controller circuits, faulty sensors, etc. I hope I can help you! 

The refrigerator compressor keeps working because the temperature does not reach the value.

If the temperature value of one side of the refrigerator does not reach the value we set, the compressor will work all the time, which is generally due to the leakage of the refrigerator, the condenser on one side of the refrigerator or the coil of the evaporation tube is damaged, resulting in the leakage of the refrigerator and the inability to exchange heat. It is also possible that the door of the refrigerator is not closed tightly and the heat is lost, most of which is because the magnetic stripe of the refrigerator door has lost its magnetism or is deformed, and it is recommended to replace the magnetic stripe independently.

When the preset temperature is reached, the bed shrinking machine is not controlled, which can only be a problem with the thermostat. Generally, there are two kinds of thermostats, the mechanical thermostat is to sense the temperature inside the refrigerator, and control the opening and closing of the contacts through the thermal expansion and contraction of the single-sided gas.

Compressors

The compressor is a driven fluid machinery that lifts low-pressure gas into high-pressure gas, and is the heart of the refrigeration system. It sucks low temperature and low pressure refrigerant gas from the suction pipe, drives the piston to compress it through the motor operation, and discharges high temperature and high pressure refrigerant gas to the exhaust pipe to provide power for the refrigeration cycle.

There are 5 types of compressors used in the refrigeration and air conditioning industry: reciprocating, screw, rotary, scroll and centrifugal, of which reciprocating is the most widely used compressor in small and medium-sized commercial refrigeration systems. Screw compressors are primarily used in large commercial and industrial systems.

There may be a problem with the thermostat, under normal circumstances, it should drop to the set temperature and stop working, if for some reason the temperature measurement is inaccurate or the relay contact is burned and cannot be opened, this situation will occur, first see if the temperature drops to the set temperature, if it arrives, it may be a thermostat problem.

The thermostat of the refrigerator is out of order, and generally this situation occurs in high temperature weather, mainly because the thermostat head of the refrigerator cannot feel the temperature change inside the refrigerator. Solution: If the thermostat of the refrigerator is faulty, if the cause of the thermostat failure cannot be checked or the fault cannot be eliminated, the thermostat of the refrigerator can only be replaced.

2.The refrigerator is not stopped is the early performance of the refrigerator not refrigerating, the refrigerator has been in a working state, and the compressor is constantly running to refrigerate the refrigerator, which means that the cold energy effect of the refrigerator has deteriorated, which generally means that the refrigerant of the refrigerator is gone or leaked. Workaround:

First of all, it is necessary to check the fluoride leakage point, make up for the break, and then replenish the freon. 3.The outside ambient temperature is too high, the refrigerator is not shut down because the temperature adjustment is too low, and the internal temperature of the refrigerator cannot be lowered.

Most of the reasons for non-stop are that the cooling capacity is leaked, which leads to the failure to reach the set temperature, and there are also non-stop because the thermostat is broken, but this situation is rare.

It may be that there is a lack of refrigerant.

When the preset temperature is reached, the compressor is not controlled, which can only be a problem with the thermostat. Generally, there are two kinds of thermostats, mechanical thermostats, which sense the temperature by sensing the temperature inside the refrigerator, and controlling the opening and closing of the contacts through the thermal expansion and contraction of the gas inside. If the gas in the thermometer leaks or the contacts are sticky, the compressor will not stop.

Electronic temperature control, which has a temperature control sensor and a circuit that processes the temperature control sensor, the temperature control sensor has become straight or the electrical appliance is sticky, and the compressor will not stop.

Do you mean that the compressor of your refrigerator is always working and will not stop automatically? In this case, it is generally because of the refrigerant leakage, or the temperature set is too low, resulting in the temperature in the refrigerator can not reach the temperature you set, and the other reason is that the temperature measuring element of your refrigerator is faulty, or the temperature controller is out of order.

Refrigerator compressor is the root of refrigerator refrigeration, the compressor through a certain working principle to let the temperature in the refrigerator drop, when the temperature in the refrigerator reaches the set temperature is the need for the refrigerator compressor to stop working, if it does not stop working, it means that the temperature will be lowered, so not only waste electricity, the most important thing is that some things need to be kept at a constant temperature, which means that the refrigerator can not be used normally.

The refrigerator compressor keeps contracting, it should be the problem that the temperature you set is too low, if the temperature is too low, it will always work.

The thermostat is broken, or the system leaks and does not reach the set value for a long time.

If the refrigerator compressor keeps working, this should be better controlled, so I think this work is very good, good, so I think this non-stop work should be because he has been giving the TV, and he has been working non-stop.

Summary. It's a device on the refrigerator, and the temperature controller is broken. The temperature controller is referred to as the thermostat, which is to control the temperature.

Just imagine, if the device that controls the temperature is broken, it means that the temperature is out of control! So the refrigerator compressor doesn't know what temperature it needs to reach, so it keeps moving to reach that temperature target. But if the thermostat is broken, it will never find an accurate target.

So it's going to go on and on. Both of these reasons are relatively common and are the culprits behind the constant running of the refrigerator. So if your refrigerator keeps running, what is the reason why the refrigerator compressor keeps working.

Hello, I have seen your question and am sorting out the answer, please wait a while

It's a device on the refrigerator, and the temperature controller is broken. The temperature controller is referred to as the thermostat, which is to control the temperature. Just imagine, if the device that controls the temperature is broken, it means that the temperature is out of control!

So the refrigerator compressor doesn't know that it needs to reach that temperature, so it keeps moving to reach that temperature target. But if the thermostat is broken, it will never find an accurate target. So it's going to go on and on.

Both of these reasons are relatively common, and they are also the culprits of the non-stop operation of the refrigerator. So if your fridge is running non-stop, it may be that the thermostat is broken. In this case, call the master to come to check and repair.