What are the commonly used ways to cut corners in hydropower decoration? How can I avoid it?

I think it's a tough question to ask unless you're looking at it from the field. So sometimes it's like this, in fact, on the spot, if you buy the materials, then the other party basically has no way to do anything. So for now, this matter is a very sad thing, in fact, if you are on the spot, you can stop them from cutting corners, but you can't stay on site 24 hours a day, so if I want to tell you, then you can only buy materials and let them install such a thing, in fact, if you let them buy materials themselves, it is easier to cut corners, so this is such a thing.

So if you think about it carefully, this thing is like this, then you just stare at it 24 hours a day, then they can't cut corners, in fact, I think that many times it's just such a thing, some things have to be done by yourself, if you do it yourself, first of all, it may not be up to standard in technology, and there is no economy to watch, so it is very tiring.

So if my goal is to buy the materials, and then let them do it, basically just like this, if you can ensure water and electricity, then I'm thankful, in fact, it's such a thing, in most cases, if the thing is not done well, then you still go to them like this, so the reality is frivolous, that's the thing, if I used to say that they did things, then I basically left their **number, sometimes I will play ** That's how it is for them, in real life, many situations are also such a thing, in my opinion, water and electricity decoration is also such a thing, if the time is good, basically there is no problem after that.

In fact, the thing is such a thing, so I think the thing, then you have to watch it more carefully, many times it is such a thing, so in my opinion, then you have to insist, then the possibility of detection is a little smaller, but most of the cases can not be opened, in fact, I think many times, this hydropower decoration is indeed a big thing, but if the hydropower decoration is done well, then it can be used for a lifetime, It's one thing, if you want to avoid spraying, then you buy the materials, and if you let them buy the materials, then the materials are all sorted.

Plumbers often cut corners when decorating is to falsely report materials, originally five meters is enough, he will buy seven or eight meters, and then will make a fuss about the quality of materials.

Hydropower construction inevitably requires slots in the walls and floors, but many workers are rough in their way because it is faster to do so. Some small accessories are also the main objects of the dropped carousel, and the materials are replaced with the materials of the hall Tong brother.

The living room, bathroom, floor and other places cut corners the most. When looking for decoration personnel, you must be careful and serious, and you must arrange someone to supervise.

When filling the toilet with materials, you must go over to see, my home decoration balance belt core was filled in the decoration waste digging materials, knocking down the bricks all kinds of dust and garbage, the filling material is too heavy on the floor slab is not good, the waterproof effect is not good, so be sure to go to the scene to supervise.

Hydropower construction is one of the links of home decoration, hydropower engineering is an important part of home decoration, it mainly includes drainage engineering and wire pipeline engineering, is a relatively hidden project. In hydropower construction, there are also corners cut, how to deal with hydropower construction cut corners? Let's take a closer look!

1. How to deal with cutting corners in hydropower construction - beware of cement blocking pipelines.

After construction, the remaining cement sand and gravel must be cleaned up, and some construction teams pour cement sand and gravel directly into the sewer pipe in order to save trouble, and the structure causes the sewer pipe to be unobstructed and even blocked. The construction supervision needs to include the disposal of construction waste, and when cleaning up, workers are strictly prohibited from pouring garbage into the sewer pipe. You can also check the water removal situation after construction, fill the water storage equipment with water, and release water at the same time to see whether the sewer water is smooth.

Second, how to deal with the cutting corners in hydropower construction - the circuit color separation is not clear.

Sometimes, in order to save materials, the construction staff will piece together the remaining wires used in other construction sites to your home for use, which leaves a safety hazard for later maintenance. According to the construction regulations, red is the color of the live line, blue, green or black is the color code of the zero line, and the yellow and green color line is the color code of the ground line. In a house, the color code needs to be clearly distinguished, and uniform color separation is used during installation.

Hydropower renovation is an important part of home decoration, which deeply affects and affects the quality of home decoration. In the process of hydropower transformation, it is inevitable that some renovation workers will cut corners. Next, we will detail the common behaviors of cutting corners in hydropower renovation to ensure that the decoration is foolproof!

1. Common behavior of cutting corners in hydropower transformation - "saving pipe fittings" for water pipe laying

In the regular waterway construction, it is necessary to use a variety of small pipe fittings such as bridge bends, straights, tees, etc., to complete the standard of pipeline laying. And in the hands of bad construction teams, it is easy to bend the waterway pipeline without using the interface. It does not intersect with wires and pipes, and does not use bridge bends, etc.

This is certainly convenient, but it has a great impact on the quality of the pipeline and the later construction.

Second, the common hydropower transformation of cutting corners - water pipe fittings do not match.

"Reducing materials" does not only refer to using less materials, but also includes substituting inferior materials for high-quality materials in order to earn the difference. In the renovation of waterways, the exchange of pipelines is less likely due to the concern of the owners. However, due to the small size of the pipe fittings and the large number used, the owner does not pay attention to it, and encounters bad decoration companies or construction personnel, it is easy to use inferior and unmatched pipe fittings to connect the water pipes.

It is important to know that this practice can easily lead to problems at the interface in the later stage.

3. Common behavior of cutting corners in hydropower transformation - cold water pipes mixed with hot water pipes.

The hot water pipe needs to accept the state of hot expansion and cold contraction, and the performance requirements for the high temperature resistance of the material are higher than that of the cold water pipe, and the closed air pipe of the hot water pipe is generally more expensive than the cold water pipe. Generally, blue is a cold water pipe and red is a hot water pipe. In the construction, it is possible to use all hot water pipes, or use cold and hot water pipes normally.

However, some bad construction teams may use cold water pipes as hot water pipes, which is not a problem for the time being, but it is easy to form cold water pipe cracks and leaks in the later stage.

Fourth, the common behavior of cutting corners in hydropower renovation - construction slag is dumped into the sewer pipe.

During the renovation, the construction personnel sometimes pour waste water and a large amount of cement, sand and debris into the sewer crack in order to save trouble. This is likely to cause a drain blockage, making the drain poor. Therefore, after the construction of the waterway, it is necessary to fill all the water basins, basins and bathtubs with water, and then see if the water is unblocked.

1.The wall thickness of the pipe is often what you miss, just like the thin-walled KBG pipe, and you can easily be fooled by the wall thickness.

2.Brand, the main project is generally line pipe, wire box and the like, the boss will not steal much, to the installation stage, like your construction site is the designated brand, the boss is to buy some miscellaneous materials when you are not there, and you have not been able to inspect, because they are hidden.

3.The drawing design will generally enlarge the line pipe, but in fact, it can be reduced by one size, because it is hidden, so you often don't pay attention to it.

4.Water supply and drainage pipes, 1 will use the ordinary drainage pipe as a spiral, and then erase the computer code and say that it was accidentally erased, and the buried one will often buy miscellaneous rotten goods instead. The same trick is applied to water supply pipes or galvanized pipes.

5.Wires and cables, this is the main profit of the hydropower boss. 1.

Ordinary BV lines are used as flame retardant or fire resistant; 2.The wire diameter of some small power consumption has been changed to smaller, and the exposed part of the wire is the original wire diameter; 3.Buying pirated goods, this is the least discovered and the last thing you will think of; 4.

Working overtime overnight to wear some of the more hidden threads, you don't have time to check at all, this is often done, you can do what you want, you can't find it.

And so on and so forth.

I'm also a construction worker for hydropower and occasionally makes a cameo appearance as a project manager.,If you don't eat and take the card.,We can really do things seriously.。。。 Also, if you've already received something from someone else, you should close your eyes. The first thing a supervisor needs to learn is to be a man and do things in two.

Haha, as long as you pay attention to the quality of various materials when you are buried, the key is to pay attention to it when installing, especially the wire and cable, which is easy to cut corners, such as reducing the wire diameter, reducing the loop, and using the grounding wire string and so on. There are also standard, medium and indirect thin wires at both ends of the line. Therefore, special attention should be paid to the irregular wire drawing inspection when necessary.

Hehe, I'm doing hydropower engineering, and those old people have told you, I'll give you a kickback with ** money?