The electrical appliance is powerful and the socket is burned, how to solve it?

The electrical appliance should be stopped first, the socket should be disconnected from the plug, and then the socket and the relevant parts of the wiring harness should be cleaned. If necessary, re-soldering or installing a new socket can be performed. Before installing a new outlet, always make sure that the appliance at that power does not exceed the current total power.

In addition, it is also possible to consider adding a fuse to the original circuit to prevent overloading.

High-power appliances burn sockets (including plugs) because of contact resistance.

If it is too large, heat is released when the current passes through, resulting in a local high temperature. The choice of the best socket, regular maintenance and replacement can alleviate this problem, but can not solve the fundamental problem. The root of the problem is that high-power electrical appliances are not suitable for plug and socket connection.

If the plug is cut off, it will be opened empty or leaked (install a switch box near the electrical appliance.

Connecting to the power supply can be a good thing once and for all.

If the socket is burned, it should be discontinued immediately and the socket should never be disassembled or repaired. If you don't have the expertise to repair appliances, it's best to have a professional appliance repairer do it. In addition, if your appliance has a large power, it is recommended to use a socket that meets the standards and pay attention to the power limit of the appliance to prevent the occurrence of situations such as overload and damage to the socket.

In the case of confirming that the line is not burned, directly disconnect the power supply and replace the socket.

Measure the resistance of the neutral and live wire of the socket, more than 2 megaohms are available, otherwise the wire and socket should be changed.

Then you can configure the corresponding size of the socket according to the actual power of the electrical appliance!!

If the rated current of the appliance exceeds 16A, it is recommended that you choose the air open or leak open control. It's safe and effortless!!

Remove the burned socket, replace the socket with a new one, pay attention to the new socket, to confirm that the power supply has been disconnected, Heng hunger state to prevent electric shock accidents.

Current overload: Ordinary sockets are generally 10A, which is converted to 10A 220V=2200W. Some friends directly plug in the induction cooker to use, and at the same time the two holes on the top are connected to other electrical appliances, so that the excessive power will directly lead to overload and burn out the socket, the socket can only be connected to a limb to call the high-power electrical appliances (other electrical appliances are unplugged from the socket), and it is recommended to replace the socket with 16a.

What should I do if the socket and plug are burned out?

The socket of the electric pot is burned out, you can replace a new socket of Tongzhao Bureau, it is relatively simple to replace the socket, open the screw of the bottom cover of the electric cooker, remove the bottom cover and you will see the location of the socket, the socket usually adopts plug-in or soldering lines, the plug-in line only needs to unplug the plug-in guess the head, remove the damaged socket and replace the new socket, and then plug in the line as it is, the welding line needs to be welded with an electric soldering iron, if you find that it is a welding line, it is recommended to find a store or manufacturer to deal with it, do not repair it yourself.

The power cord plug and the power cord are integrated structure, the plug can only replace the entire power cord when the plug is burned, and the plug cannot be replaced separately, and the new power cord must be replaced.

Summary. Dear, you can generally use it, as long as it is not burned out. In this case, the voltage is generally unstable or the power of the purchased socket is not suitable.

The power is too small, if it is an important electrical appliance, it is better not to use it, you can go to the store for a high-power one, generally buy a socket row few people pay attention to, buy are low-power, household!

The socket is burned because the power is too high, can I continue to use it?

Dear, you can generally use it, as long as it is not burned out. The occurrence of this suspicion of cherry blossoms is generally due to the unstable voltage, or the power of the plug-in is not suitable for the plug-in. The power is too small, if it is an important electrical appliance, it is better not to use it, you can go to the store for a high-power one, generally buy a plug-in row is very rare, few people pay attention to it, buy it is small power, household!

Dear, it is recommended that it is best to replace it before using it.

Abstract: If you use high-power electrical appliances to get the jacks, if you exceed the rated power, you will burn out.

How to burn out appliances on an outlet.

Hello, I have seen your question and am sorting out the answer, please wait a while Oh Put the jacks on with high-power appliances, and if you exceed the rated power, it will burn out.

How to burn out household appliances from the meter.

It is to burn out household appliances from the outside meter.

Loosen the wiring screws, resulting in poor contact.

Think about burning out a household appliance from an electric meter.

Can you burn a household appliance off the meter at once?

Use a few more kettles and hair dryers with high power. It won't take long for the electrical appliances to be less bad is to burn other people's household appliances from the outside, how can you use so many high-power electrical appliances, and they will burn out at once.

Reasons: 1. The power consumption is too large, and the general 10A power socket can carry the electricity power below 2200 watts;

2. The quality of the power socket is poor or the wiring is not fixed firmly during installation, resulting in heat damage;

3. The power cord is too thin, causing the socket to heat up and damage;

4. The quality of the power plug of the electrical appliance is not good.

It is estimated that the socket is loose and the voltage is too high

The load on the socket exceeds the old rated load, which increases its temperature and causes damage to the socket

The main reason is that the power consumption is too large and the contact is poor, and the "snort" is loud, which is caused by the plug being too loose.

Your socket is not good, it means that his power is too small, buy a big one and it's fine.