How to fix the rotten hole of the cabinet screw?

1. Mark the position of the screw hole first, and then use a screwdriver.

Pry the hole open, enlarge the hole a little, insert it directly into it with a plastic screw fastener, and then tighten the screw.

2. If the screw hole is damaged, it is best to replace the screw with a new one, and use hot melt adhesive to the broken place.

Fill it up. How to repair screw holes in wood products and how to maintain them?

1. First choose the glue that does not harm the wood products, and the fluidity should not be too high.

2. Buy a set of miniature taps.

and wrenches; Find a straw with a diameter smaller than the screw hole and let the glue stick around the straw to the screw hole to ensure uniformity. Once the glue has cured, tap the wire inside the hole formed by this straw with a tap.

3. Use the tap with glue and screw it into the screw hole along the residual thread. After the glue is cured, the tap is removed with a wrench.

What are the tips for rusty screws that can't be unscrewed.

1. We can first use a wrench to tighten the screw, and then we use a hammer to hit the handle of the wrench, and hit it a little harder, so that after a few knocks, the rusty part inside should also be loose for knocking.

2. Use the method of fire and gas welding.

After the oxidation flame has fully burned the screw and nut for a while, a few drops of oil are dropped on the red-hot screw to allow the screw to cool down quickly, which can also enlarge the screw and nut.

The gap between them, and then screwing it is very easy.

3. If the screw is slippery, a small rubber block can be placed on the screw of the sliding wire, which is used to increase the friction of the screw.

No matter how easy you turn the sliding wire, the screws will be unscrewed.

Mark the position of the screw hole with a marker, then pry the surface with scissors or a screwdriver, enlarge the hole of the screw a little bit, insert the plastic screw fastener and lock the screw; If the damaged area of the screw hole is large, you can only find other places to lock the screw, and the broken place is filled with items such as wooden bolts or hot melt adhesive.

The repair method for rotten screw holes in the cabinet is as follows:

1. First choose the glue that does not harm the wood products, and the fluidity should not be too high.

2. Buy a set of miniature taps and wrenches; Find a straw with a diameter smaller than the screw hole and let the glue stick around the straw to the screw hole to ensure uniformity. Once the glue has cured, tap the wire inside the hole formed by this straw with a tap.

3. Use the tap with glue and screw it into the screw hole along the residual thread. After the glue is cured, the tap is removed with a wrench.

Cabinets

English name: cabinet, refers to the utensils used to store clothes, documents, etc., square or rectangular, generally wooden or iron. The use of cabinets began in the Xia, Shang and Zhou periods, when it was called "椟".

In the Ming and Qing dynasties, cabinets became a must-have furniture for interiors, and the shape was finalized. Ming and Qing cabinets can be divided into square corner cabinets, rounded corner cabinets, and bright lattice cabinets according to the shape, and their constituent parts are also different.

Cabinet furniture mainly refers to cabinets made of materials such as wood, wood-based panels or metal for various purposes. When wiping the surface of the wooden wardrobe, do not let corrosive chemicals such as alcohol and detergents directly contact the wooden surface, which will cause some damage to the wardrobe.

In addition, there are many types of wardrobes on the market, and among them, sliding door wardrobes are popular among consumers because they do not take up much space. In the face of such a wardrobe, we must pay special attention to the maintenance of the slide rail, and do not let heavy objects smash the slide rail and cause it to deform. In addition, it is also necessary to regularly check the slide rail to see if there are scratches and deformations, and properly drip Yuli lubricating oil to prolong the service life of the slide rail.

Hello, the following is a little sister to solve your doubts for you, I hope it can help you. First mark the position of the screw hole, then pry the hole open with a screwdriver, expand the hole position, directly insert the plastic screw fastener into it, and then tighten the screw. If the screw hole is damaged, it is best to replace the screw with a new one and fill the broken area with hot melt adhesive.

Cabinet one is one of the furniture that each of our families has, most of the cabinets are made of wooden materials, and it is not surprising that the frequency of use is more than that it is damaged, for example, we often open and close the cabinet door, and the screws of the cabinet door of poor quality are easy to be damaged and loose, what should we do in such a situation?

You can first mark the position of the screw hole with a file pen, and then pry the surface with scissors or a screwdriver, expand the hole of the screw a little bit, and then directly insert the plastic screw fastener and lock the screw; If the damaged area of the screw hole is relatively large, you can only find another place to lock the screw, and the broken place is filled with items such as wooden bolts or hot melt adhesive.

How to choose a wardrobe.

1. Look at environmental protection, many brands use materials that meet the relevant national environmental protection standards, but some manufacturers use some three-no products, such materials are very harmful to human health, so we must show the relevant quality inspection report when we buy and choose.

2. Material veneer, now the style and color of the wardrobe are more, some surfaces look gorgeous but can not withstand scratches, scratches will appear on a scratch, we must choose more scratch-resistant and wear-resistant and waterproof and fireproof material veneer, so that the quality can be guaranteed.

3. Look at the process of edge banding, now most of the plates are MDF, and the edge can not collapse around the plate, after the edge banding, the external air and water vapor can not enter the body of the plate, which is easy to cause the deformation of the plate, and some manufacturers have not carried out edge sealing in order to save the side that does not see the light.

4. In terms of hardware, whether it is the track of the sliding door or the hinge of the swing door, we must pay attention to the material of the hardware, the track should be made of anti-aging and anti-corrosion materials, and the dust strip and the anti-collision strip must be matched, and the sliding will not produce noise, and the hinge should be made of 304 stainless steel, the bearing capacity must be good, and the buffer must be provided, so that there will be no sound when the door is closed.

Summary: The above is to introduce to you the relevant content on how to repair the rotten screw holes of the cabinet door, and the skills of wardrobe selection, I hope it will be helpful to you, and more content can pay attention to Qeeka Home.

Solid wood doors are very popular in the home, with natural texture, good decoration, and not easy to deform, with the effect of heat insulation, wooden doors are usually fixed with screws when installed, there will be nail holes on the door, after a long period of use, there will be rotten holes under the action of force, resulting in loose wooden doors, can not count the normal use of cherry blossoms, so what to do if the screw holes of the wooden door are rotten? Let's follow the experts of Qeeka Home to learn about the potato celery bush.

1. What should I do if the screw hole of the wooden door is rotten?

The screw hole of the wooden door is rotten and needs to be removed, and the screw is installed in a new place, so that it will not be used to use the wooden door, and the original screw hole can be filled with sawdust first, and then flattened and brushed with some white latex, so that the hole will not fall out of the sawdust, and it is easier to paint at the same time.

Second, how to choose a wooden door.

1. Look at the wood.

There are many materials for making wooden doors, basically wood can be made, common pine, fir, black walnut, teak, cherry, maple, beech, etc., walnut, mahogany and other materials are relatively high-end, so it is relatively rare on the market, and there are many counterfeit products, so you must carefully distinguish the authenticity of the wood when buying.

2. Look at the paint.

The surface of the wooden door will be painted, mainly to protect the wooden door from the outside world, its paint surface should be very full, no flaws, you can stand on the oblique side of the door to observe, through the reflection can clearly see whether the surface paint film is flat, there is peeling, or protruding particles.

3. Look at the surface flatness.

If the wooden door has veneer blistering, the surface flatness is not enough, the seams are not uniform and small, etc., it means that the quality of the wooden door is not good, of course, the hardware accessories of the wooden door are also very important, and the hardware products of the famous brand manufacturers should be selected.

Summary: The above is the introduction of what to do if the screw hole of the wooden door is rotten, I hope the content shared can give you some reference, if you want to know more about relevant knowledge, you can **** Qijia Home to consult.

In order to facilitate the opening and closing of the wardrobe door, a plurality of hinges are generally installed on the wardrobe door, and the hinges are generally fixed on the door panel by screws. Let's take a look.

1. What should I do if the screw hole of the wardrobe door hinge is broken?

1. If the hinge screw hole of the wardrobe door is damaged, you can use a hot melt gun to punch some glass glue in the damaged hinge screw hole to close the hinge screw hole. Then make some new hinge screw holes in other positions, and then install the hinges in the new screw hole positions.

2. Or plug some small wooden plugs or toothpicks into the damaged hinge screw holes, etc., and then use an electric drill to install the screws on the small wooden plugs or toothpicks, and fix them firmly, and then install the hinges, and test whether the wardrobe door can be opened and closed normally, if it cannot be used normally, you need to use other methods to repair.

Second, what aspects should be paid attention to when buying a wardrobe.

1. Look at the selection of wardrobes.

When buying a wardrobe, be sure to check the selection of wardrobe materials in detail. Under normal circumstances, regular wardrobe manufacturers will choose to meet the national environmental protection standards for production, and generally can provide relevant quality inspection reports. If the manufacturer is unable to provide the quality inspection report and relevant test certificate of the plate, the environmental protection performance of the plate cannot be guaranteed.

2. Look at the veneer of the plate.

When shopping for a wardrobe, be sure to check the veneer of the board in detail. You can try to use your nails to shave lightly on the veneers to see if there are scratches, if they do, they are inferior veneers. The thickness of the dipping paint of high-quality veneers is generally thick, and it has been treated with high temperature and high pressure, so there are generally no scratches.

The above is a detailed introduction to what to do if the screw hole of the wardrobe door hinge is broken and what aspects to pay attention to when buying a wardrobe, I hope it can help friends in need. When the screw hole of the wardrobe door hinge is broken, it must be repaired in time, otherwise it will affect the normal use of the wardrobe door.

Hello, if the screw hole screw is damaged, 1. Choose to install the wire screw sleeve to repair the screw hole. First of all, the special tapping of the steel wire screw sleeve is selected, the steel wire screw sleeve is installed, the threaded hole is repaired, and the threaded hole after the steel wire screw sleeve is installed, and the original bolt can also be used.

2. Choose the self-tapping screw sleeve for the repair of the threaded hole screw teeth. The installation tool and installation steps of the self-tapping screw sleeve are simple, and the self-tapping screw sleeve does not need to be pre-tapped with a tap, and the self-tapping screw sleeve can be directly twisted into the threaded hole of the slippery wire or messy teeth with a self-tapping screw sleeve installation wrench, and it can be repaired.

3. If it is a product with high requirements for the fastening performance of the threaded hole, you can choose the bolt screw sleeve to repair the threaded hole, there are two or four bolt keys on the external thread of the bolt screw sleeve, and after the bolt screw is set into the threaded hole, the bolt key is pressed into the bolt key, which can enhance the fastening strength and safety performance of the threaded hole.

Electrically weld a screw and unscrew it off. Or there are special tools to get the screws out. If you have small screws, you can use pliers to clamp them directly and twist them out or pull them out.

Specification 4

Number of teeth AB 24 20 20 19 18 16 14 14

A tooth 24 20 18 16 15 12 11 10

Specification 4

Outer diameter of the tooth AB lower limit.

Upper limit A Lower limit.

Upper limit length and tooth length: (1) Length specifications: The self-tapping nails produced by the company are all full teeth, (when the customer has requirements, according to the standards specified by them) (2) Length measurement:

For countersunk and semi-countersunk screws, the length should be measured from the tip to the top of the head. (3) Length tolerance: The tolerance of AB teeth and BP teeth is that when the length is less than 1 inch, the tolerance is

03in, and more than 1 inch. B, BT, C and T teeth, the length tolerance is when the length is more than 3 4 in, the tolerance is in, greater than 3 4 in to 1-1 2 in, the tolerance is in, greater than 1-1 2 inches its tolerance is in. (4) Provisions for tooth length:

Requirements for AB, B, BP, BT teeth: the complete thread should be processed as close to the head as possible, and the interval under the head should be made to ensure that the small diameter of the thread is within the specified limit, as shown in the following table. If the nominal length is greater than that of the listed product, the minimum complete thread length shall not be less than the LT specified in the table below.

Table 4 Thread lengths of AB, B, BF, BP and BT threads.

Test items: Head diameter, thickness of the cutting ditch, depth of the cutting ditch, width of the cutting ditch, thickness of the cross head, depth of the cross, and width of the cross.

Dental AAB