If you want to print out the comics, and you want to splice 2 sheets into 1 sheet of A4 paper, is th

Ordinary household inkjet printers generally only support printing A4 format images, which is more than enough to meet the usual printing requirements, but if you want to print large posters, oversized characters, large T-shirt patterns or something, you may feel at a loss. A few days ago, the author from the Internet ** a software called Wall Photo Maker, which perfectly solves the problem of A4 format printer printing large**. The software can enlarge the original ** and divide it into several parts and print it out in turn.

At the same time, it supports input of bmp, wmf, emf, gif, jpg, pcx, png, tiff and other formats, and also has eight special effects such as embossing, blurring, mirroring, and negatives, which are simple and convenient to use. The latest version of the software is, file size 2141kb, **link.

Don't worry, the most important thing is to adjust the size of the **. In "dimension" select **size, the drop-down menu has pixels, meters, centimeters, millimeters, inches, feet and other units, and then enter the width and height values in "width" and "height" respectively, and select "bicubic" in "algorithm", in order to avoid deformation and distortion, the software will adjust the ratio of width and height by itself. At this time, several vertical and horizontal dotted lines will divide ** into several parts, there are a few parts to print a few pages, click on each part to preview the actual printing effect of the page.

After setting the print paper, click the "print" button in the upper right corner to print it. Each printed footer has coordinates for that section, making it easy for you to complete the stitching work. The rest is simple, find out the scissors to cut the **neatly, and then use the self-adhesive to splice the parts**.

Tip: It's important to note that Wall Photo Maker doesn't allow you to zoom in indefinitely**. Generally speaking, the higher the resolution, the better, if the printing resolution is greater than the resolution of the ** itself, it will be a little blurry.

In addition, try to choose the ** in TIFF format, which has the advantage of small distortion.

It really doesn't work with fineprint

1. Open the excel you want to insert.

2. Then position the cursor to the right side of the cell you want to insert (as shown below), then click "Insert" in the menu bar, click the black triangle in the lower right corner of the "**" in the lower menu, and then click the "From File" item.

3. At this time, all ** are listed in excel in order. (Then the top one is the last one, and the order of insertion is stacked on top of each other from the first to the 8th).

4. Select the top picture separately (that is, the 8th diagram inserted), hold down the alt key of the keyboard and drag the ** piece, drag it to the position of the corresponding serial number 8, 5. Then use the mouse to point to the circle position in the lower right corner of **, and drag it to the cell from the bottom right to the top left.

6. Then while selecting **, click the checkmark in front of the "Lock Aspect Ratio" in the menu area (finally remove the checkmark).

7. Then select the bottom one of the unset ** in the same way (that is, insert the first picture), and then remove the "lock aspect ratio" front check of **, and then enter the height and width of the 8th picture. Now the first image is set.

8. Then select a picture, press the Ctrl+A key on the keyboard, select all **, and then click the 2 in front of the "lock aspect ratio" above to drop the checkmark, and then enter the height and width just set.

9. At this time, all ** will become the same size.

10. Then click on the triangle below the alignment in the menu area, and then select the "Vertical Distribution" item in the drop-down menu.

11. Click the "Left Alignment" item in the Align drop-down menu.

12. In this way, all the ** will be done.

This kind of thing generally doesn't use office, you install a higher version of acdsee, such as acdsee 12, after running, select ** in acdsee, file-print, select the contact form on the left, and other parameters such as a few rows and columns you can set as needed.

Hello, you can use PPT's insert album function to insert in batches**function**layout**Select 4 photos**.

Excel and Work are not graphics software, can not be automatically arranged and aligned can be used with PowerPoint, on the A4 new document to draw a transparent square of the same size as **, and then copy four horizontally or vertically, and then insert the small ** into this square, because the square has a snapping function, so it is easy to align.

Of course, if you use coreldrew to arrange the alignment, that's a small case

Here's how to fix it:

Check All.

Right mouse button. Click Print.

Click Next. Then click Next.

Select a printer.

Click Next.

Click Next.

Click Done.

Oh very simple, that is, when you insert the word document** is likely to be one-third or smaller, you can left-click on the stand-alone**, and then right-click to select the layout, floating above the text can be dragged at will, so that you can occupy the entire A4 paper, very simple, I wish you well.

If it is purely for printing, you can use PowerPoint's deletion function.

Create a new blank ppt, insert a photo - create a new photo deletion, select **, insert.

Page setup, paper set to A4, portrait. Print.

You can rename **batch (00-99, a total of 100 sheets), insert it into word after completion, and put 9 on a piece of paper through **typesetting**.

2.We can see that there are four ** sheets in the file that need to be printed.

3.Drag the mouse to select these four sheets, and the title bar will display the print options.

4.Click Print to enter the Print page.

5.Drag the scroll bar on the right to find 9*13 cm (4), and these four ** sheets can be printed on a piece of paper.

1. First of all, let's put the ** source to be printed.

Select all bai, for example, if I want to print these four du**, click the mouse zhi right button, click dao to print.

2. The pop-up dialog box is as follows, and all we see is a **.

3. Select the small window on the right side of the window, slide down the bar, so that we can print out four ** on a piece of paper, and the proportion size is the same, when we want to print 6 **, we choose 6 ** typesetting.

4. Select the number of copies you need and click Print.

5. The printer starts to work and prints out**.

If you have Office software installed on your computer, you can try the following:

Right-click the **, select "Open By--Microsoft Office Picture Manager", click "File--Print", **Print Wizard appears, press Next twice, the "Layout Selection" window appears, select "Wallet**" in the "Available Layouts", set the "Number of times to print each **" is "6", press Next.

This software can impose automatically.

In addition to choosing 6 photos, you can also customize it.

To reduce the pattern, to reduce the proportion, how to automatically typeset a ** on A4 paper to print 6 **.

1. Photoshop open the first one to be processed**, Ctrl + A is selected, the dotted box is below the mouse arrow, if it is scissors, then tap the M key. Right-click the mouse, select "Transform Selection" (not "Free Selection"), hold down the Shift + Left mouse button to keep the year-on-year ratio down from one corner of a box, press and hold the left mouse button to adjust the position of the reduced box at will, and press the Enter key when appropriate. Then select "Image", "Crop" (not "Cut"), and finally select Ctrl + D, and a ** is finished.

2. The second one is processed in the same step**.

3. Create a new canvas, set to "International Standard Paper", select "Layer Diagram", "New Layer Diagram", then open the first photo, Ctrl + A selected, "Copy", click the new layer diagram, Ctrl + V. Repeat for the second one**. Select "Move Tools" to layout and adjust the two **.

4. Finally, "File", "Save As", select JPEG format.

When printing, click the option There is a relevant print format, you can drag multiple sheets onto a flat surface to print on a single sheet.

Open the office software on the computer word click on the menu bar of the insert--**-- from the file (select the ** you want to insert) so that you can insert a few if you want to,**You can adjust the size by dragging ** at any corner of the blade.

With XP's built-in ** browsing software, you can choose it when printing.

Typography with related software!

Such as pothoshop can be!

1. Open the target **1 with PS and modify it to 7 inches.

The specific method is [Image Size] - adjust to [5*7]** size, resolution 300.

2. Open **2 and modify it to 5 inches in size. The specific method is the same as above, the scale is 5*, and the resolution is 300. If the proportions are not suitable, the size can be adjusted according to individual needs.

3. After the adjustment is completed, create a new document, and set [Print] - [A4] - [Resolution 300] in the properties interface.

4. After creating the document, select the [Select] tool in the upper left corner of the interface.

5. Then drag the 5-inch and 7-inch ** into the current new document.

6. Click 7 inches** and press the shortcut key [Ctrl+T] to open any transformation tool.

7. Enter 90 degrees in the deformation angle, and rotate 90 degrees in the forward direction.

8. Use the selection tool to put the edge close to the typesetting, and leave the space to row two more five-inch sheets. Drag to adjust the distance from the edge, leaving the cropping area. After completing the above settings, you can use Photoshop typesetting to print multiple ** on A4 paper.

1. Open Photoshop CC 2019 on your computer.

2. After opening Photoshop, create a new **, change the unit to millimeters, and then enter the A4 paper size 210*297, and then click Create.

3. After creating the document, drag ** into the document.

4. After entering the ** drag in, but hold the alt key, keep copying multiple ** and typesetting.

5. Photoshop CC 2019 has automatic reference line assisted typesetting, so typesetting is relatively simple.

1. Create a new A4 size, 300dpi white background file;

2. Open multiple **, drag it into the background file, and ctrl+t to adjust the size and position;

3. Use the "Move Tool" to hold down the shift+alt keys to drag and copy at equal distances (the software has a numerical prompt when dragging and copying, and there is a short pause prompt when dragging and copying);

4. Merge layers, print, and finish.

First use the light and shadow magic hand batch processing ** size, and then paste them directly on A4 paper is more convenient and faster! I can quickly get 24 sheets of A4 paper on my small 2-inch **! Hehe! It's so much easier than photoshop!