What should I do if the chassis of the washing machine bleaches up as soon as it is washed, and the

The anti-detachment spring of the upper shaft of the reducer is broken or the shaft is pulled out with the upward float of the wave wheel.

Solution: If you understand the technology, you can disassemble the reducer and install the shaft by yourself, and then install the circlip.

Otherwise, send the repair department or after-sales service department to replace the reducer. (Note: The circlip is placed in the transverse ring groove of the axis on the third figure).

What you mean by this phenomenon is that the washing machine's wheel [i.e., the disc that spins back and forth] is always slippery during the washing process.

In the normal process, the wave wheel of the washing machine is geared, generally ten or eleven gears, the gear of the wave wheel and the gear of the deceleration clutch of the washing machine floor are closed, synchronous operation, and there is no reaction force.

This situation occurs in your washing machine, generally used for many years or too much laundry will appear in the machine, rarely, the disc floats because the wave wheel is the disc gear smoothed, resulting in the reaction force of the wave wheel can not be synchronized with the clutch to cause the wave wheel wire to automatically loosen and fall off, change the wave wheel can solve the problem, the after-sales wave wheel is generally about 30, the maintenance fee is 50, a total of about 80, you can use the washing machine model to shoot the local after-sales service to send one, give them 30 on the line, save 50 yuanHehe.

Help me if you understand, and ask me if you don't understand.

In fact, the landlord's problem has nothing to do with the wave wheel, but in the washing state, there will always be a loosening of the middle fastening screw, causing the whole wave wheel to float. The solution is to lock the middle screw as long as you add a spring gasket or non-slip gasket locking, if you are not at ease, you can drop a drop of 499 glue in the appropriate position after locking, after this treatment of the wave wheel will not float up again.

Let's change the chassis Several teeth in the chassis have been knocked out.

Have you ever changed the wheel?

The chassis of the washing machine fell loose and needed to be disassembled and replaced.

1. To open the lid of the washing machine, you need to use an ordinary household screwdriver, align the screw holes in the shaft, rotate counterclockwise until the screws inside are screwed out, take out the screws, and pay attention to put the screws to avoid loss.

<>3. Use hooks, symmetrical left and right, aim at the gap of the chassis, hook the chassis with double hooks, gently shake the chassis, and slowly hook the chassis out.

4. Take out the chassis by hand, then use water to clean the chassis, and at the same time clean the inside of the washing machine, after cleaning, put the chassis into the washing machine, tighten the screws in the clockwise direction with a screwdriver again, and install it.

Summary. The screws of the bottom turntable of the automatic washing machine are loose, as long as the bottom power rotates after tightening, the screws will rotate with them, and then loosen, how to repair them?

Hello, I am Mr. Xiaocao, and I am happy to answer for you. According to your description, this is the bottom turntable screwed to the chassis, and the screws are screwed into the screw holes of the chassis. The following rotation is due to the damage to the threads of the chassis screw holes, and the modeling allows you to use or code the tapping tool to re-punch the holes.

You can choose a tapping tool according to the size of the screw, repair the screw hole on the chassis.

What is the tapping tool like.

What you think is tightened is not fully tightened, and the internal damage to the screw hole of the chassis will not allow the screw to be fully secured.

The tapping tool is a long strip of metal rod like a drill bit, and the shaft has something similar to a screw thread.

This kind of drill bit rotation and screwing will form a new screw thread in the screw hole, you need to pay attention to the right model when using it, so as to ensure that the screw hole size is standard.

I hope mine can be helpful to you and have a great day!

Dear, glad to answer for you. If the screws of the chassis of the washing machine are slippery, you can try the following methods to solve it: use a screwdriver:

If the screws are not completely slippery, try using a screwdriver and applying the appropriate force to see if you can unscrew the screws. It is important to note that you do not use too much force to avoid damaging the screws or the chassis of the machine. Use rubber pads:

Place a piece of rubber pad on the screw head and use a screwdriver to unscrew the screw. Rubber pads can increase friction, provide better grip, and help unscrew the screws that strain the filament to defeat. Use pliers:

Hold a pair of pliers around the screw head and rotate it firmly to see if you can unscrew it. It is important to note that you do not use too much force to avoid damaging the screws or the chassis of the machine. Use rust remover:

If the screws have slipped, you can try using a rust remover, spraying an appropriate amount of rust remover on the screws, allowing them to soak for a while, and then using a screwdriver or pliers to unscrew the screws.

Summary. Reasons why the washing machine washes clothes chassis does not turn:

1.The motor belt is loose and the friction is not enough, so the wave wheel rotation is weak, so you can adjust and tighten the belt appropriately.

2.The capacitor capacity of the washing machine motor is insufficient.

The function of the capacitor is to increase the terminal voltage of the motor, and the capacity of the capacitor will be reduced, and the terminal voltage of the motor will be reduced, and there will be weak start-up operation or can not start and run normally, you can contact the after-sales service department of the washing machine for maintenance and replacement of the capacitor.

The washing machine washes clothes and the chassis does not turn is what's going on.

Reasons why the washing machine washes clothes and the chassis does not turn: 1The motor belt is loose, the friction is not enough, so the rotation of the wave wheel is weak, so you can adjust the belt properly and tighten the belt to be right.

2.The capacitor capacity of the washing machine motor is insufficient. The washing machine motor belongs to the capacitive start operation motor, the role of the capacitor is to increase the terminal voltage of the motor, the capacity of the capacitor is reduced, the terminal voltage of the motor will be reduced, and there will be a weak start or can not start normally, you can contact the after-sales service department of the washing machine for maintenance and replacement of the capacitor.

It should be the chassis slippery.

It's as if the chassis is stuck, and you can move it with a hammer hammer in one direction.

You can take the chassis apart to see if there is a foreign object blocked inside.