-
You can do it at a general car shop.
In fact, the use of computer paint mixing technology can basically restore the color of the original car, but due to the difference in paint thickness, painting environment, painting temperature, etc., the color will be deviated, and the bottom layer before spraying the topcoat will also have a certain impact on the paint color. That's why after scratching a car, we recommend repainting the entire piece instead of touch-ups. Repair paint is to scrape off a small piece of the original scratch place to re-spray the new color, the general color difference is large and can not be fused with the original car paint, so it is easy to fall off, produce obvious color blocks.
Generally speaking, the color difference of black is not easy to see, but white, especially the pure white car paint of non-metallic paint, is most likely to appear when the color difference is repaired in the later stage, because white is the basic color of all colors, and now the white paint of the vehicle is not pure white, but also on the basis of white paint by adding other color paints to modulate, the human eye is sensitive to the color vision of white, and there is a slight difference when mixing paint, and there will be a particularly obvious color difference when spraying on the body. The color difference is not large when the paint is repaired in time, and with the passage of time, the wind and the sun will be exposed, and the original car paint and the later paint will undergo different color changes, and the later period will also produce obvious color difference.
Car owners who have experience in spraying paint know that in fact, if you spray paint in a regular painting place, you can not see the obvious color difference with the naked eye in the later stage, and the experienced old spray paint engineer takes into account the factors such as the outside world and baking paint when mixing the paint, and the basic guarantee color difference is not large, which does not affect the appearance at all, so the owner does not have to worry too much about the color difference of the spray paint, and only needs to find a regular paint shop.
-
It's all the same, it won't be good because it's a 4S store, and the color difference of pearl white spray paint is inevitable.
-
It is normal to have color differences, whether it is in a 4S store or spray paint yourself.
-
The effect of doing it in a 4S shop is similar to the original car color.
-
The effect made in the 4S store will be similar to the original color, but there will be color differences.
-
There will also be color difference in 4S stores, this kind of thing, as long as you do it, there will be color difference.
-
Almost the same, there will be color difference.
-
It's all the same, and there will be more or less color difference.
-
I went to the 4S shop to get it, and I completely saw that I got it.
-
Whether it is done in **, there will be color difference.
-
It is recommended to go to a professional 4S store for spray painting, after all, you get what you pay for.
-
As follows:
It is not serious, it depends on the situation, if it is sprayed pearl white, there is no color difference when it is just sprayed, but there will be color difference after a period of time. Therefore, it is uncertain whether there is color difference, and it is necessary to look at the quality of the paint used when spraying, whether the process is correct when spraying, and other factors can cause color difference.
Classification criteria for white car paint:
1. Classification by type: manual painting and automatic painting.
2. Classification according to the variety of car paint: alkyd paint, acrylic paint, water paint.
The standard of painting can be divided into two different capacities: 200ml and 400ml according to the volume (European Paintusa standard).
-
I'm the same as you, you've squirted before? After I sprayed, it was darker than before.。。
-
The effect is similar to that after I sprayed, I think it's quite obvious.
-
You're still 4s outside the squirt
-
There will be a little color difference, and waxing will be a little better.
-
For pearl white car paint, it is possible to partially touch up the paintAnd because the proportion of raw materials used is fixed, it is relatively easy to match the color, but as for the color difference after the paint repair will be obvious, it depends on the color level of the car repair personnel and the paint repair technology, and the color difference after the repair paint is not obvious.
Pearl white touch-up paint.
There is also a way to repair by touching up the paint pen, the repair speed is also relatively fast, generally only three steps can be completed within an hour, the first is to clean the scratches on the body, then use the touch pen to touch up the scratch parts, and finally the repair of the paint surface can be polished.
-
If you buy the paint yourself, it may be sprayed up, because the personal operation technology and painting steps are not perfect, it may lead to a little color difference.
If the area that is rubbed is not particularly large, the range of your spray paint will not be large, then it will not be so obvious.
If the scratching range is relatively large, I still recommend that you go to the repair shop to let professional personnel spray paint, although it costs more, but the effect is really very good, and you can't see that it has been scratched at all.
-
Hello, pearl white belongs to metallic paint, and the paint quality is better. However, the disadvantage of this pearl white car paint is that the later paint repair is easy to produce color difference, and there will be a slight color difference from the 4S shop to repair the paint, and it will not be seen for a long time after the paint repair.
-
Hello, this car is mainly repainted, or after painting, he will definitely have a slight color difference.
-
Hello, this color of the model, if you want to touch up the paint, it is recommended to go to the 4S shop to do it, and there will be no color difference in general.
-
Hello, no matter what kind of paint it is, there will definitely be a color difference in the touch-up paint, if you want the color difference to be a little smaller or go to the 4S store is better, the color will be more professional, but the price is also high.
-
The color of pearl white looks very stable and stable, but it is really not easy to adjust the color when touching up the paint.
-
Under normal circumstances, in the case of subsidy in the later stage, there will generally be color difference.
-
Hello, this color of car paint is recommended to the 4S store configuration is better, there is basically no color difference, and there is no guarantee for painting outside.
-
If you seem to be in this situation, you can go directly to the 4S shop to make paint and spray paint, and the quality is relatively better.
-
It is not obvious in the early stage, and there will be a little bit in the later stage, so it is recommended to do it in a 4S store, and the gap can be less.
-
Hello, if the scratch is not big, it's fine, if the scratch is big, it's best to maintain the paint in the 4S shop.
-
If you touch up the white lacquer of pearl paint, there will definitely be some color difference, you can refer to it.
-
Touch-up paint is possible. Color difference is very common, this is because the color of the original factory is unified according to the characteristics of the proportional configuration, the theory of the original paint, the secondary deployment is difficult to have the same color, but the difference may be very small, the color difference needs to be detected by professional equipment, the boss said that it will be the same after a period of time oxidation. However, it is also possible that the difference may be difficult to tell with the naked eye.
Take care to look closely at the damaged area, and if the damage is more than one-third of the part, over-repair should be used. Over-repair is the spraying of the whole part of the varnish, and the color paint is excessive from the damage to the original paint, which maximizes the retention of the original color paint and avoids the problem of color difference.
Because one-third of the damage is sanded, primed, painted, varnished and barbed more than two-thirds of the part, the remaining part is so small that it loses the meaning of repair.
-
Hello, if the color difference is too big, it is recommended to re-paint, I hope it will help you, if you have any questions, you can ask [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】
-
Summary. If there is a significant color difference between the color after spraying and your original paint, then there are two possibilities, first, the color ratio is not adjusted well, and it is recommended to re-spray. Second, if the color is a little dark within a month after spraying, it may be that the paint has not dried thoroughly.
But if it's still darker after a month, it's the wrong color. You can go to the 4S shop to re-spray, but you don't need to spray the whole car, you can use the transition spraying technology to spray, so that the similar color does not look so obvious, if you care about the color very much, it is recommended to use imported paint to avoid discoloration in the future. Finally, it is recommended that it is best not to spray too much, if the number of spraying is too much, the body will fall off like dry skin on your hands in the future.
Especially if you want to think about the roof and hood, which is a relatively large area. Remember that after the paint of the body is dry, do the body care, waxing, or glazing. Good for the bodywork.
What should I do if the color of pearl white spray paint is gray and red, and it is darker than the original paint?
If there is a significant color difference between the color after spraying and your original paint, then there are two possibilities, first, the color ratio is not adjusted well, and it is recommended to re-spray. Second, if the color is a little dark within a month after spraying, it may be that the paint has not dried thoroughly. But if it's still darker after a month, it's the wrong color.
You can go to the 4S shop to re-spray, but you don't need to spray the whole car, you can use the transition spraying technology to spray, so that the similar color looks loose and not so obvious, if you are very concerned about the color of the ruined Song, it is recommended that it is best to use imported paint to avoid discoloration in the future. Finally, it is recommended that it is best not to spray too much, if the number of spraying is too much, the body will fall off like dry skin on your hands in the future. Especially if you want to think about the roof and hood, which is a relatively large area.
Remember that after the paint of the body is dry, do the body care, waxing, cherry head or glaze. Good for the bodywork.
This is especially noticeable on cloudy days or in low light.
This is normal.
How long has it been the color of the whole car, can it be smoothed?
It should be ok. Oh, thanks.
You are welcome.
-
Waxing can not be solved, it is caused by color paint, pearl paint, but color paint, pearl paint under the varnish, polishing can only be thrown to the varnish, not color paint, pearl paint.
Pearl white paint is a color difference, that is, with the same cup of paint, different people spray, the effect is not the same, mainly in the nacre film thickness problem, a little thicker will be yellower, darker, (pearl white paint belongs to the three-process topcoat, the first layer is sprayed with white primer, the second layer is sprayed with pearl paint, and the third layer is sprayed with clear paint). Therefore, the problem of pearl white color difference is difficult to solve, white is better than darker, if it is darker, it is more ugly, just a little whiter, don't worry about him, if it is a lot white, you can find a repair shop for respraying.
Hope this helps,!!
-
AbstractHello, you can ask the store to give you a free paint spray not limited to a certain surface, or let the store re-paint you to solve your paint color difference. There is no other way to solve the problem of color difference, but to re-paint or give you a paint service.
The lacquer made in the 4S shop is pearl white, and the color difference is large, what should I do, can I come over after a while? Whether or not to repaint.
Hello, you can ask the store to give you a free paint spray on a certain surface, or let the store re-paint you to solve your paint color difference. There is no other way to solve the problem of color difference, but to re-paint or give you a paint service.
This belongs to the master's paint mixing problem.
The spray paint master in the store said that the white spots will be better in the later stage, if the same, the later stage will be yellowish, is it fooling me that this can not be eliminated, if you mind, it is better to ask for re-spraying.
Is that fooling me?
This is not flickering, not flickering, you and he will change it if you and him force it, I'm afraid that it will squirt out again, and it will be more yellow than the body in the later stage.
Then we are not a spray paint master, and we can't guarantee how effective the master will be.
-
To ensure that the spray paint pearl white has no color difference, it mainly depends on the materials used in the spray paint, the spray paint formula, the spraying conditions, and the temperature control of the metal parts and plastic parts of Shenzen spray paint. Although pearl white spray paint is more prone to color difference, it is not necessary to go to the 4S store for painting, as long as it is a regular spray paint store.
To ensure that there is no color difference in pearl white, it is necessary to check the raw materials used in painting, so as to avoid color difference due to insufficient material grade and inaccurate color matching; In order to ensure that there is no color difference, it is also necessary to work the formula of spray painting, which should not only be reasonable, but also use a combination of sun lamps and tinting light boxes to simulate different light sources in the process of manual fine-tuning, so as to ensure that the final color can be consistent with other components under various light source conditions.
The condition of painting is also an important factor affecting the color difference, because in the painting process, the paint technician and the paint technician are often different people, if they use different spray guns, or the spraying habits are inconsistent, the number of layers sprayed is not strictly defined, and the degree of coverage of the base color is not enough, which will also lead to color difference. In such a situation, the process management should be strict to ensure that the standard control spraying conditions are exactly the same as when mixing paint and boarding.
Because of the different heat absorption capacity of the material, the drying time will be inconsistent, resulting in different masterbatch precipitation sequences, and the final product will have slight differences. When spraying plastic parts, the temperature of the bumper and the temperature of the metal parts should be strictly controlled to be consistent to ensure that the drying time is as consistent as possible. The primer is then perfectly covered to minimize the color difference between the plastic bumper and the metal parts.
What to do if there is a color difference
1. If it is a problem with the quality of the painting, it is required to re-paint.
2. The paint surface may not be completely dry, in this case, the color of the newly sprayed paint surface may be dark, open it for a few days, and then go back to the repair shop to do a free polishing after the paint surface is dry, which will have a certain effect.
1. Latex paint.
What are the colors? >>>More
There are two ways to choose: 1) Polishing the surface of galvanized parts with coarse sandpaper, the rougher the better, and use a grinder to install a steel wire polishing wheel to evenly polish the surface to produce staggered scratches on the surface, (after grinding, the dust particles will be magnetically adsorbed on the surface of the component, and it is best to wipe with a soft cloth and purge with an air pump) so that the adhesion of plastic spraying will be further enhanced! 2) The electroplating parts are washed with dilute hydrochloric acid deplating water in phosphating, and the adhesion of this treatment is the strongest, but this operation should work continuously, and the components will rust after a long delay. >>>More
Dry spraying means that the topcoat is diluted a little, the air output and air pressure of the spray gun and the matte surface are adjusted to be even, and then slowly sprinkled, like a drizzle, and then continue to spray when it is almost dry, until it is completely covered and cannot be sprayed; Wet spraying is the opposite of dry spraying, the first paint is not dry and then sprayed, it is easy to spray wet and shiny, which is the so-called wet spray. Also, in the process of spraying paint in the future, it is best to dry spray, so the effect should be good, you can not be in a hurry when spraying paint, you must take your time, it is a fine job, you must be careful and careful, so you can't try to be fast, in a hurry to cover the putty, sometimes wet spray will lead to being bitten by the spray surface, in short, depending on your personal situation. >>>More
1 (First of all, it is recommended to use the canned diluted one about 30cm, just spray it back and forth) Since you are using an air pump, then explain your problem, first of all, it is not your dilution ratio, it is the method and distance There is a problem, concentrated or too thick, it is the distance you are close to, the speed of the hand movement is too slow, resulting in unevenness, to be even, it is necessary to come ** to cause too thick waves, the common is too thin, blow all open, or the pen is too close, and blow the paint surface that is not dry. >>>More
The landlord means that he wants to spray on the PP products after molding, right? If so, we'll address it as follows. First of all, because of the physical properties of PP, it is difficult to adhere to the paint, so it can be sanded before spraying, which is useful for larger PP injection molded parts. >>>More