GUNPLA Painting Problem 20, GUNPLA Painting Problem

1 (First of all, it is recommended to use the canned diluted one about 30cm, just spray it back and forth) Since you are using an air pump, then explain your problem, first of all, it is not your dilution ratio, it is the method and distance There is a problem, concentrated or too thick, it is the distance you are close to, the speed of the hand movement is too slow, resulting in unevenness, to be even, it is necessary to come ** to cause too thick waves, the common is too thin, blow all open, or the pen is too close, and blow the paint surface that is not dry.

2. In fact, one hour of time is completely enough, the precipitation will be there when the time is to let the air flow back, the time depends on the brand and type of paint, it is difficult to say.

Additional: When spraying, it is best to have a gas mask or something in a dry room, before spraying, you can see whether the hair color is normal in the newspaper and whether the dilution ratio is normal, and it is also necessary to consider the size of the paint area, how much difference will be made in each configuration, and the color will be miserable after completion (you can't see the difference when spraying, the difference is another matter), correct the air reflux, there is no dilution problem, it is the mixing of paint and thinner.

If you have any questions, please feel free to ask!

You're too close, and you're not moving.

1. Matting refers to spraying a layer of matting paint on the surface of the model to reduce the gloss of the plastic to increase the texture, and also protect the paint surface from being damaged.

2. Gundam is basically sprayed and matted if the prime group is sprayed, because spraying matte can reduce the texture of plastic.

3. The principle of extinction is: from specular reflection to diffuse reflection.

4. The consequences of matting: reduce the gloss of plastic to increase the texture, but also protect the paint surface from being damaged, reduce the refractive index of the surface, and do not see the feeling of reflection.

Yes, but post-processing the nozzle will be more difficult.

Now there is basically no fully hidden nozzle of the model plate after spraying paint, cut down, the nozzle is still plastic color, the color is more troublesome, the pump pen spray is normal spray on the line, the spray can first spray evenly, and then the distance of about 20-30cm quickly sweep the spray, generally less once or twice, and then wait for the dry and then sweep and spray once or twice, there is no spray to the place and finally sweep twice, do not stay in the first place to spray.

Yes, but post-processing the nozzle will be more difficult.

Now there is basically no fully hidden nozzle of the model plate after spraying paint, cut down, the nozzle is still plastic color, the color is more troublesome, the pump pen spray is normal spray on the line, the spray can first spray evenly, and then the distance of about 20-30cm quickly sweep the spray, generally less once or twice, and then wait for the dry and then sweep and spray once or twice, there is no spray to the place and finally sweep twice, do not stay in the first place to spray.

You can spray paint on the board, but there will be no paint at the nozzle when the part is removed, and you need to make up the color, so you should take it down and spray it with paint, and as for how to spray paint, please consult at the GUNPLA bar, where there are professionals.

Yes, if you want. But the paint has one effect, which is to hide the nozzle. It doesn't work if you do that, especially if the spout is large.

It can also damage the paint finish. However, this will not confuse the parts. It's up to you.

It is best to remove them all, deal with the nozzle, and then spray after filling the soil, and spray it directly, and finally deal with the problem of the nozzle.

After spraying on the board, cut it out and use a fine brush dipped in paint to dot the water spout, but be careful, otherwise it is quite easy to go wrong.

Yes, spray directly. But there are some details you want to use in other colors with markers. When you are using an airbrush, this part should be covered with masking solution first.

Stick to the surroundings with a covering tape, and pay attention to make up the color I with a marker after touching the cut

Have you squirted before? Or are you ready to go into a fountain pit? Do you want to use a spray can or a spray pump? If you have the conditions, buy a spray pump, which is more cost-effective than sprinkler irrigation.

No one sprays directly on the board, don't be lazy.

Hello, if you want a frosted metallic texture like Fruit 6, general metallic paint is fine.

**Demonstration only).

There are three main methods of painting, each with its own advantages and disadvantages, please choose according to your personal situation.

Brush: The advantage is that the tool is cheap and can handle particularly complex small-scale patterns, but the disadvantage is that there will be more or less brushstrokes, and the larger the coating area, the more uncontrollable the strokes.

Sprinkler irrigation: benefits, the spraying surface is smooth, trouble-free, and one press can be. The disadvantage is that there is only one color in a can, and the spraying force is fixed and not adjustable.

Spray gun: benefits, spraying smooth, adjustable output, is also the best choice. Relatively expensive, though.

Once the model is made, it's time to paint it, so let's talk about the basic tools you need to use to paint it.

1.Pen Just like the pen to be used when painting when you are a child, there are ** (divided into many numbers) in major art supply stores, it is recommended to buy animal hair made of pen hair, the brush hair is soft and elastic; A gouache brush is also available. After the pen is used, it can be cleaned with banana water (also called Tianna water, and the paint store sells 2 3 yuan bottles).

2.Paint dish As the name suggests, it is a tool for holding paint, there are many on the market, it is recommended to buy the county's, 10 yuan box (11) ps: If you want to save money, you can use a small dish with spices at home.

3.Paint mixing stick A small stick made of stainless steel, the basic tool for color mixing. Both ends are made into tools for scooping and stirring, and the small spoon controls the amount of paint scooped out, which can be accurately distributed. Tamiya's products are 400 yen (No. 74017).

4.Model paint Model paint is a necessary tool for model coating, there are many kinds of common model paint on the market: Tian Gong, Junshi, model king, angel, Xianying, soldiers, etc., ** are not the same, which is divided into:

Nitro paint: mold king, angel; Water-based paint: Tianmiya, Junshi, Xianying, oil-based paint:

Tian Gong, Gunshi, Soldier; Enamel lacquer: Tamiya. It is generally recommended that beginners use the nitro paint of the mold king (6 yuan bottle), if you want to pursue perfection, it is not the county, Tian Gong is the only one, the effect is not said, it is more expensive (14 20 yuan bottle).

5.Solvent According to the different quality of the paint, the choice of solvent is also very important, the general solvent has Tamiya, Junshi, Mowang products, it is recommended that if you use good lacquer, Junshi ** for 900 yen airbrush special solvent (large bottle, 400ml) must be the first choice. Tamiya's lacquer is best suited with the solvent it produces (No. X-20).

6.Other masks: Paint is toxic, and everyone knows it, so masks are the most basic supplies for proper protection.

It is better to have a gas mask. Gloves: If you accidentally get paint on your hands, and then go to other parts, it will cause contamination, in order to avoid this situation, prepare a pair of gloves is a must.

First of all, it depends on what kind of spray paint you use, generally super zhi with a spray can, hand cranked after can.

DAO spray; Another kind is to use an air pump + airbrush to operate, and the master Rong does this.

You can spray it according to the effect you want, and if you spray the can, remember to shake it well and spray it, and the spray can will be thicker.

If you spray a pen, you should generally spray a layer of water to fill the soil, and the dilution ratio is about 1:5 (depending on personal habits), mainly to check the polishing situation and increase the adhesion of the paint, and then you can color, and the depth and thickness of the color can be adjusted by yourself.

Note: Generally, you can rinse the parts with detergent before painting, in order to clean off the release agent, because it is oily, it will be easy to peel off the paint, so after cleaning, polish it with 2000 fine sandpaper, and then paint it.

Steps: Start by copying the model element group.

Okay, understand the movable linkage of the body, **need to spray** do not spray, and then disassemble the model and put the parts of the same color together. Clamp all the parts with crocodile clips and start coloring.

Xin'anzhou: Fill the soil, gloss black, starlight gold (silver), transparent red, varnish without a spray pump and a pen? It's a bit difficult to do this relief, so you can only cover it, and the amount of work is huge.

If the particles are too large in China, it is not recommended to use them, but it is still a jar from Ritanomiya, and the color is very positive.

Freedom to change the blue is not a small change, what color to change, just take out the parts of that color and spray them. What's the problem, hi I'll do it.

No, no, no, no, you can't spray directly, it's going to hang p.

Domestic industrial sprinkler irrigation recommends that you do not use it because the particles are coarse and not good-looking, really.

If you are a newcomer, it is recommended to buy a turtle pump and a spray pen, more than 100, less than 200, you can take it.

I used to use the domestic mold king more than 4 pieces of a can, and the effect is OK, but the taste is very strong.

If you have money, you can get the Tamiya card.

It is best to buy a Nissan "Sakura" for a bleed pen, don't feel distressed, because the quality of the bleed line will affect people's first impression when they look at the model!!

Before the airbrush is colored, you also need two other things, one is boiling oil and water, which is used to dilute the pigment, generally pigment: boiling oil and water = 1:9 ratio to reconcile; The other is the fill-up, you spray the make-up soil directly on the model, the model will become all gray, so that after the color, the color will be more beautiful and more uniform.

If you are on the edge of the ditch, you can use the ditch pen for beginners, but when you get to the back, you will find that the line drawn by the pen is very thick. So there is another method of ditching called "seepage". All you need is a bottle of X-20 solvent, and a bottle of X-1 black pigment to pigment:

Solvent = 1:9 ratio blending.

Covering tape (can be replaced by scotch glue) must be used to color with a pen!

Part decomposition Head, chest, waist, arms, legs, etc. ** Attachment 2 Gradually disperse the parts of each part in order, starting with the head decomposition.

a) Sandpaper sanding the nozzle and clean it with a toothbrush b) Spray the inner nail iPrimer: water to refill the soil.

Dilute with 400 ml diluent of gunshi. Water recharge soil: dilution 1:

2。Spray with the criss-cross method. When filling the soil with water, there should be an overall consciousness and the thickness should be uniform.

ii.Fixed 1The first type of part with a void or gap, forked in with a toothpick and secured with adhesive tape.

2.The second type of part, which has no voids or gaps, is secured with clips. Be careful not to pinch the spray area.

3.The third type of particularly small part is fixed to the thick cardboard with double-sided tape that is not very sticky and marked. iii.

Dry ivToning Diluent to paint ratio is 2:1 v

Install the airbrush, pump, and test the spray to see the effect viThe test spray is correct, and the inner nail is sprayed.

1.Direct spraying a) color mixing, debugging the airbrush, test spraying b) coloring (color separation, pen stroke) c) drying d) (dry sweeping).

3.Light and shadow spraying (take white light and shadow and red light and shadow as examples) a) Light and shadow white 1Spray a slightly thicker black (or a darker color than the main color (other than white) in the shade (on all sides) of each side of the part

Allow to dry 3Spray the first layer of white, spreading from the center of each face to the periphery, and spray gently, gradually covering the shaded part 4Allow to dry 5

Spray a second layer of white to focus on the natural transition from highlights to shadows.

First of all, you bought an oil-based matting can spray, and there's nothing wrong with that.

Secondly, if you want to spray the coating method, it is best to spray it as a whole. In fact, there is no certain rule that it is said to be sprayed as a whole or separately. But in general, we spray holistically, especially matting.

Matting is not like varnish, and too much spraying will not have an effect. If the matte paint is sprayed too much, the surface will be white. Of course, in order to save trouble, the last protective paint (matting and varnish we collectively refer to as protective paint) is the overall spraying.

The specific spraying method is: 1, the model is good (of course, the plain group party is assembled) 2, shake the bottle evenly, and spray it at a distance of 15cm-20cm from the model. (Just press once, don't be in the same position for more than 2 seconds).

3. If you spray it specifically, about 4 times is fine. Remember not to overspray. will be white.

ps: In fact, spraying and dulling still depends on the feeling, a thin layer is enough. Don't spray a coat like a varnish, be sure to cover it.

You bought an oil-based matting tank (remember to bring a mask, it's toxic).

Spraying method: There is no certain rule that it should be sprayed as a whole or separately. It is best to spray whole. If you spray too much matting paint, it will turn white and crack. If you disassemble and spray, it will be miserable if you accidentally spray too much.

Spraying: Shake the oily matting can, shake evenly, and spray back and forth at a distance of about 20cm from the model. (Just press it).

If you spray it specifically, about 4 times is fine. Remember not to overspray. Will be whitish.

The humidity should not be high when spraying, otherwise it will cause white spots.

Temperature, don't be too cold and don't be hot, too hot to dry too quickly and easy to accumulate, too cold paint can't come out directly, if it feels very cold, don't use fire to roast, use warm water to scald the bottom.

The function of matting paint is to protect the paint while making the plastic parts of Gundam look metallic, if your inner armor is painted, then remove the outer armor and spray the inner armor and outer armor separately, spray it in a well-lit place, don't spray it too thick at once. If the inner armor is not painted, just consider the aesthetics, just spray it on the part, that is, you don't need to disassemble all the parts, separate the hands, feet, head, waist, and **, and spray them one by one. Technique, you have to explore it yourself, take a look at the ** of spray paint.

Remember to bring a mask, this thing is still a bit toxic.