What is the reason for Supor blue rice cooker to cook pasty rice?

This fault is mostly due to the fact that the magnet in the heating plate in the pot is broken or the bimetal switch contacts in the pot are sticky, and the parts need to be replaced for repair.

You can play the after-sales service of its brand** to consult, some big brands have after-sales service departments in various places, you can also check it. It may be that there is too much water, or that the pot is not working. The rice cooker is broken, repair it or replace it.

In the first step, cooking porridge is also cooking rice, so take a certain amount of rice and wash it according to the demand.

The second step is to put the washed rice into the rice cooker, add water to it, it is very important to add water, the amount of water added when cooking porridge is not the same as the amount added by ordinary cooking rice, add a little more water, must not be less, add 4 to 5 times more water than ordinary cooking rice, in order to ensure that the cooked porridge, it doesn't matter if you add more water, it is just a little thinner, but don't add less, if you add less, it is not porridge.

The third step is to put the lid on the pot after adding water, not the whole cover, you can use chopsticks to hold the pot noodles, so that it will not be covered tightly.

Fourth, the rice cooker will not trip when cooking porridge, so whether it is cooked or not should be judged by yourself, and you can just unplug the power after cooking.

Put the washed rice into the rice cooker, add water to it, it is very important to add water, the amount of water added when cooking porridge is not the same as the amount added by ordinary cooking rice, add a little more water, must not be less, add 4 to 5 times more water than ordinary cooking rice, in order to ensure that the cooked porridge, it doesn't matter if you add more water, it is just a thin point, but don't add less, if you add less, it is not porridge. How to make rice cooker porridge :1

Cook the porridge well.

2.Chop the green onion and place it on a plate.

3.Pour the green onion into the porridge and mix it with salt and oil.

4.Put it on the table and wait for the porridge to cool.

Extended information: Porridge rice is a unique food of the Oriental people mainly in China, with different shapes, and the materials used in various places are rice, millet, black rice, lotus seeds, peanuts, white fungus, barley, red beans, etc. It is usually a food accompaniment.

Cornmeal can also be used as porridge on its own, and it is said that the Empress Dowager Cixi loved to drink a bowl of corn porridge every day. Most people mistakenly call porridge, but in fact, porridge and porridge are not the same thing at all. There are many kinds of porridge, such as preserved egg and lean porridge.

Porridge is a slightly viscous object that is thinner than porridge, and it is thinner than porridge. The recipe for porridge is very simple, he doesn't take as long as porridge and the ingredients are not so rich, but eating more porridge for breakfast can clear the stomach and intestines, and it is still very good for the body.

Now rice cookers have the function of cooking porridge, put rice and an appropriate amount of water in the rice cooker and press the porridge to cook.

Set the function key to cook porridge, and then press the start button.

There are options for various foods on the control panel of the rice cooker, wash the rice, add the rice and water to the rice cooker in proportion, turn it on, select the corresponding function keys, and you're good to go.

1.Before cooking, take an appropriate amount of rice with a measuring cup, add water according to the proportion of rice water after washing, and the ratio of rice to water when cooking porridge is about 1:8, and you can also add water according to the domestic scale line;

2.You can increase or decrease the amount of water according to different types of rice and your own hardness and softness of the rice;

3.Cover the pot, press the "Function" button to select "Quick Cooking", "Cooking Porridge", "Multigrain Rice", "Steaming", "Soup", "Cake", "Claypot Rice", Fine Cooking and other programs, press the "Start" button to start the program after selecting the program, and the corresponding indicator light will light up, which means that the rice is cooking.

There are many reasons why rice cookers can't cook rice, so let's take a look at the relevant knowledge.

After eliminating the problem of the pot, we also have to check the heating plate of the rice cooker, because the reason why many rice cookers have the problem of not cooking rice is not because the pot of the rice cooker is deformed, nor is there a problem with the parts of the rice cooker, but because the heating plate of the rice cooker is deformed.

If we check and find that it is neither a problem with the rice cooker or the heating plate, then we should consider that the parts of the rice cooker are broken. When inspecting the rice cooker parts, we must first check the temperature control switch of the rice cooker to see if the temperature control switch is deformed, if so, repair it in time, if the maintenance is not meaningful, then we must change a new temperature control switch in time.

Lesson summary: If the rice cooker is not cooked, it may be that there is a problem with the temperature limiting system, or it may be that the cooking switch of the temperature limiter is moving, and the static point contact is poor. The surface of the static and dynamic contacts should be checked for contaminants or oxide film, and if this is the reason, the oxide film can be sanded clean with sandpaper zero. When grinding, the action should be light to prevent the contacts from deforming.

If the contact between dynamic and static contacts is poor, you can press the two contacts with your hands or small tools to make the contacts contact, and there is a certain pressure. Be careful not to over-press, otherwise the holding temperature will increase. In addition, it should be cleaned daily to avoid dirt on the moving and static contacts.

Of course, it cannot be ruled out that the failure is not caused by an abnormal contact. The rice cooker may also be caused by a disengagement of a certain part, resulting in the permanent magnet not being able to lift up, which may be related to the attraction of the temperature-sensing magnet. After the inspection, as long as the disconnection is reconnected, it can be resumed to normal use.

The rice cooker is not cooked, there are the following reasons: 2 whether the sensor is faulty 3 the temperature sensor is damaged, you can go to the after-sales service store for repair, or replace the rice cooker. 4. Check whether the function key is selected correctly 5 Press the function button for cooking rice, and the corresponding function button should also be selected for porridge and soup, such as the brown rice used, it is recommended to add 10% more water to operate.

6. Whether there is a foreign body on the surface of the heating plate and the bottom of the inner tank 7. If there is a foreign body, it needs to be removed, and the inner tank can be rotated in the rice cooker to make it fully contacted. 8. Whether to stew rice after cooking9 After cooking, it is necessary to simmer rice for about 10 minutes, otherwise the effect will be affected, and it is also necessary to pay attention to whether the lid is often opened during the stewing process.

The above is the answer to your question, do you have any other questions, I can answer them for you at any time The question is changed to the electric board, and the thermostat is useless.

Hello, the reason why the rice cooker is not cooked is that the electric board is a problem, you have replaced it, you can ask the maintenance personnel to see if the sensor is faulty, wipe the inner tank with a rag to prevent foreign objects, it will also lead to no heat transfer.

The above is the answer to your questions, do you have any other questions, I can answer them for you at any time The temperature is not high, and the exhaust hole is not gas at all, I am very sorry, I may not be able to help you with this problem, because the circuit structure in the rice cooker also needs professional maintenance personnel to open and repair it, if it is still within the warranty period, you can go to Supor after-sales service.

Hello dear, the reasons why the rice of the Supor rice cooker is not cooked: 1. The ratio of water and rice is improper, and the water may be less. 2. There are foreign objects (rice grains, carbon deposits, etc.) sticking to the bottom of the inner tank, or the deformation of the bottom of the inner tank leads to poor contact with the heating plate, insufficient heating, and the magnet is powered off in advance.

Self-inspection, cleaning or shaping will do the trick. 3. Due to the old, the magnet or thermostat (heat preservation) base spring has changed the Zheng resistance value, resulting in early power failure, cooking rice clamping continues to occur, it is recommended to find the maintenance department to adjust or replace the hope can help you.

What is the reason why the Supor rice cooker is undercookedHello Zenzhi, I am happy to answer for you<> Supor smart rice cooker is not cooked rice, usually the reason is that the pot lid sensor is broken or damaged, the second is the bottom sensor is damaged, and finally there is the circuit board circuit. Hope the above has helped you <>

If my answer is helpful to you, please give a thumbs up (comment in the lower left corner), look forward to your like, your efforts are very important to me, and your support is also the motivation for my progress. Finally, I wish you good health and a good mood! <>

1. Scoop up the rice, put the water in it, and cover the pot. The amount of rice and water used depends on the actual number of people.

2. Press the "Function" button on the panel, press continuously, and select "Porridge". Press the same key to select other functions.

3. Press the "Appointment" button, start working a few hours after starting the appointment, cook porridge, and the "Appointment" light will be on all the time.

<>5. Press "minute", each press is 10 minutes, 7 hours to start working, a little early, 30 minutes late, so adjust it to "30", so that it starts working at 4:30 in the morning.

6. Everything is set, press the "Start" button, and the rice cooker will enter working mode.

When the appointment time counts down to 0, the rice cooker starts to work, and the hard-working owner can get up a little later, knowing that many housewives have to get up at 5 a.m. to make breakfast for their children in the winter, when it is still dark.

7. What should I do if I make a mistake and want to reset it? Press the function key "Keep Warm Off" to reset the setting.

Rice cookers generally have a porridge cooking button, directly add an appropriate amount of rice and water and press the porridge cooking button, generally about 1 hour can be cooked.