How do I set up a mix in a small speaker on my computer?

Microphone Mixer Modulation Method].

1. Right-click the sound icon in the lower right corner of the system, that is, the "Little Speaker" icon, and select "Recording Device" in the pop-up menu.

2. Enter the Sound Recording Options dialog box.

3. Right-click anywhere in the blank space of this tab and select "Show Disabled Devices".

4. At this time, a gray "Stereo Mix" tab appears, which is disabled by default by the system, so you need to open it manually. The other part of the sound card is not a "stereo mix", but a "heard sound".

5. At this time, click to select "Stereo Mix", and then right-click in the pop-up menu and select "Enable".

Sixth, at this point, the "stereo mix" becomes color.

7. Set "Stereo Mix" as the default, right-click"Stereo mixing" In the pop-up menu, check "Set as default communication device".

1. Right-click the sound icon in the lower right corner of the system.

2. Enter the Sound Recording Options dialog box.

3. Right-click and select "Show Disabled Devices".

4. Open the "Stereo Mix" tab.

5. Click to select "Stereo Mix".

6. Right-click the stand-alone mouse and select the "Enable" button.

7. The "stereo mix" will become colored.

8. Set "Stereo Mixing" as the default.

Speakers are also known as "horns". It is a very commonly used electroacoustic transducer device, which can be seen in the electronic and electrical equipment that produces sound.

There are many types of speakers, which can be divided into electric type (i.e., moving coil type), electrostatic type (i.e., capacitive type), electromagnetic type (i.e., reed type), piezoelectric type (i.e., crystal type) and so on according to its transducer principle, and the latter two are mostly used in rural cable broadcasting networks; According to the frequency range, it can be divided into low frequency speakers, medium frequency speakers, and high frequency speakers, which are often used as combination speakers in loudspeakers.

According to the transducer mechanism and structure, the moving coil type (electric type), capacitive type (electrostatic type), piezoelectric type (crystal or ceramic), electromagnetic type (compression spring type), ionic type and pneumatic speaker, etc., the electric speaker has the advantages of good electroacoustic performance, firm structure and low cost, and is widely used.

1. First of all, we open the computer desktop, find the small speaker in the lower right corner of the desktop, and right-click.

2. Select the audio settings in the small window that pops up, which is the one under the sound manager.

3. Select the record button above the mu branch surface in the pop-up box.

4. Then inside you can see a mess like a stereo mix, right-click to select.

5. Then click Enable, and the stereo mixing will be turned on.

6. Finally, adjust the volume of the mixer, so that the QQ voice can let the other party hear the voice of my own computer.

Microphone Mixer Modulation Method].

1. Right-click the sound icon in the lower right corner of the system, that is, the "Little Speaker" icon, and select "Recording Device" in the pop-up menu.

2. Enter the Sound Recording Options dialog box.

3. Right-click anywhere in the blank space of this tab and select "Show Disabled Devices".

4. At this time, a gray "Stereo Mix" tab appears, which is disabled by default by the system, so you need to open it manually. The other part of the sound card is not a "stereo mix", but a "heard sound".

5. At this time, click to select "Stereo Mix", and then right-click in the pop-up menu and select "Enable".

Sixth, at this point, the "stereo mix" becomes color.

7. Set "Stereo Mix" as the default, right-click"Stereo mixing" In the pop-up menu, check "Set as default communication device".

1. Right-click on the speaker and select the recording device.

2. Enter the recording device menu, and find that there is no option of stereo mix, then right-click in the blank space and check "Show disabled devices".

3. At this time, the stereo mix option has appeared, right-click on the column and select "Enable".

4. After enabled, right-click again and select Set as Default Device.

5. At this time, the stereo mix option has become the default device and can be used.

6. Double-click on the stereo mix properties, select "Level" after entering the menu, and adjust the volume of the appropriate mix. Click "OK" when you're done.

9. Select the "Level" column, remove the mute, and adjust the microphone volume. When the adjustment is complete, click OK.

It should be said that it is okay, the singing equipment set of Singer Mate I use, when singing, it can be like KTV, but singing along is to sing while listening.

No sound issues with the computer:

First, first confirm that the hardware is fine. If the speaker is fine, the sound card is fine, and if you've tested it on other machines and it's really good, then you can read on.

It is strictly forbidden to copy and repost, the eagle of the Gobi Desert

2. Make sure all the cables are exactly right. Then power on the speaker and turn on the volume switch.

3. Install the driver of the sound card correctly, if it is an onboard sound card, it is best to install the driver provided on the driver disk of the motherboard.

In fact, the computer does not make a sound, and many times it is because the sound card is not driven correctly. In general, after the sound card driver is installed, there will be a small speaker icon in the taskbar in the lower right corner. ）

Fourth, if you are sure that the driver is installed correctly, then take a look at the volume settings in the computer.

The specific method is to double-click the speaker icon in the taskbar, and check whether the volume is turned off to the minimum in the "Volume Control" and "Waveform" dialog box in the pop-up "Volume Control" and "Waveform".

If these two options are not available in the dialog box, click on the "Options" menu - select "Properties" - select "Volume Control" and "Waveform" in the "Show Volume Controls" and then set them correctly.

Note: Step 4 can only be set up after the driver for the sound card has been installed correctly.