How do I completely reinstall and empty my computer?

2.Prepare the installation media: Next, you need to prepare the installation media, such as a USB flash drive or CD-ROM, to load the operating system installation files.

3.Go to BIOS Settings: Next, you need to go into BIOS Settings and set the USB flash drive or CD as a startup item in order to boot the installer from the USB flash drive or CD.

4.Start the installation: Finally, you can start installing the operating system, and during the installation process, you can choose to wipe the hard drive so that you can completely reinstall and empty the computer.

Take win10 as an example, the method to completely reinstall and empty the computer is as follows:

1. First turn on the computer, and then click Microsoft in the lower left corner of the computer desktop.

button and in the pop-up interface, click Settings.

2. Then click Update & Security in the pop-up interface.

3. Secondly, click Recover in the pop-up interface.

4. In the pop-up interface, click Start in Reset This Computer.

5. Finally, choose to keep my files or delete all the content to complete the win10 reinstallation system.

of the operation. Computer, commonly known as computer, is a modern electronic computer machine used for high-speed calculation, which can perform numerical calculations, logical calculations, and also has the function of storage and memory. It is a modern intelligent electronic device that can operate according to the program and process massive amounts of data automatically and at high speed.

A computer that consists of a hardware system and a software system without any software installed is called bare metal. It can be divided into supercomputers, industrial control computers, network computers, and personal computers.

There are five types of embedded computers, and the more advanced computers include biological computers, photonic computers, and quantum computers.

If you want to reinstall the computer, then you can choose to make a USB flash drive to boot and then find a system on the Internet. Start it with a USB flash drive during installation, and then erase all the data in the computer for formatting. This will allow you to completely empty your computer.

1. Format the non-system disk.

2. The system is reinstalled.

How to install a USB flash drive as an example:

2. Use the floppy disk pass software to extract the image file into the ghost folder in the system disk of the U disk that has been made.

3. Set the U disk system disk as the first startup item.

For example: 1) Dell computer, press F12 when booted up to enter the startup item settings.

2) Use the keyboard arrow keys to select the USB flash drive and press enter after starting.

4. Enter the U disk system menu.

5. Select 2 to enter the PE system.

6. Click on the one-click recovery system and click OK in the dialog box that comes out.

7. Automatic installation system.

1.Boot your computer with a boot disc with DOS.

2.In DOS, run the format command {format} command to format the C drive {format c:}

3.After formatting, replace the system disk, restart the computer and install the system!

Right-click on my computer, click Management, click Disk Management, except for the C drive, all formatted. Then redo the system, format the C drive, so that all the disks are cleaned up.

There is a formatting in the middle of the installation disk installation, format this disk and then decorate the next step. Very easy to use.

You can choose to wipe all files when you reinstall the system.

Step 1: First of all, open the computer you want to reinstall the system, enter the Windows 10 system, select "Settings" macro in the start menu, and click Open.

Step 2: Select "Update & Security" in the settings screen and click Open.

Step 3: Click "Restore" in Update & Security and click Open.

Step 4: Select "Start" in the window and click Open.

Step 5: Select the "Delete All Files" option in the pop-up window to clean up the original files.

Step 6 and finally, click "Next" to start reinstalling the system and solve the problem.

The reinstallation system will automatically format and rewrite the C drive to the system, so the files on the C drive will be erased.

Files from other hard drive partitions will not be automatically erased, and can only be cleaned by manually formatting these hard drive partitions before or after the system is reinstalled.

If you reinstall the system, the files on the C drive will be cleared and replaced with a new system.

For other disks, you can format them all to completely erase them.

As for the software that appears after reinstalling the desktop, it is integrated into the system, installed together, and can be uninstalled later.

If you have any questions, please ask.

Do you use a CD-ROM to install the system or a USB stick? Or use a hard drive. If the first two disks are used, they can be formatted and reinstalled with disks other than the C disk.

If you use a hard disk, format a disk first, and then move the system disk to the formatted disk. Then format the other disks. Again, ignore the C drive.

Because when you install the system, it will replace the C drive.

Just format it and it's empty, and all the files are clean.

The specific steps to completely clean the original file by reinstalling the system are as follows:

The materials we need to prepare are: computer,

1. First of all, we turn on the computer and click to open "Recovery" in Update & Security.

2. Then we click to open "Start" in the pop-up window, and then select "Delete All Files".

3. Then we click to open "Next" in the pop-up window.

1. This requires software, and the optimization master is not bad.

2. It is recommended to use.

3. Registry cleanup.

4. Disk file management.

5. Intelligent software uninstallation.

Yes, after all the tidying up, your computer is particularly refreshing and fast.

The computer is full of memory after not being used for a long time, and it teaches you to clean up the computer memory garbage thoroughly!

You can try Super Bunny, I think it's okay, find a no-install version, the effect is okay.

If you have just installed the system when you have backed up, just restore it and install the system the same as if not, then it is not easy to do any software is not so clean I hope it can help you!

Only a reinstallation system can achieve this.

Or after reinstalling the system, make a system backup immediately, and restore the system if necessary.

Isn't it better to install a system?

Your question is too broad in the first place, whether or not the reload changes the partition table means whether or not you will do the partition modification work.

Generally speaking, genuine users can repair it with a disc, and if there is no disc, you can load it with the original ISO image, format C: (Win7 can only be 4096 bytes NTFS) beforehand, and then reinstall it to this partition.

For ghost, just rewrite the original ghost, whether it's a backup file or an installation file.

If you have a disc, restart it and install it directly according to the steps.,I'm not sure if you have it.,If you don't, reply and then write how to install it with a U disk.。

4. Then restart the computer, when the boot screen appears, use the boot shortcut key to guide the USB flash drive to start into the main menu interface of Chinese cabbage, and select "Run Chinese cabbage win8pe anti-blue screen version (new computer)" Enter to confirm. This is shown in the figure below.

5. Log in to the desktop of the Chinese cabbage installed version of the PE system, and click to open the partition tool on the desktop. This is shown in the figure below.

6. In the partition tool window that opens, select the hard disk you want to partition, and then click "Quick Partition" to enter the next step. This is shown in the figure below.

7. Select the number of partitions you need, and then click "OK" to complete the operation. This is shown in the figure below.

The above is the Chinese cabbage installation version for the detailed use of the hard disk partition tutorial, there are such situations or do not understand how to partition the computer hard disk users can try the above Chinese cabbage use tutorial operation to see.

5. Finally, click on the desktop"Manual ghost"That's it, and finally install it according to the prompts.

If it is partitioned, it is generally included in the system disk, and it is formatted directly without partitioning.

It's very simple, after backing up your own data, just repartition it when you install the system.

On the computer there is a computer manager, there is a computer manager.

The system can be installed using a PE system or a system CD-ROM drive.

The PE system is suitable for the installation of computer systems that need to back up the computer C disk and desktop data files or the computer is not equipped with a CD-ROM drive, while the system CD-ROM drive is a direct system installation and cannot be used to back up computer-related files.

Windows 7 system disc is placed on the computer CD-ROM drive, and the computer reboot setting is started with the CD-ROM drive (see the specific BIOS version for specific settings);

The computer enters the Windows 7 system installation interface;

Click Install Now;

Tick I accept the terms of the license;

Select Custom Installation, Next (Upgrade Installation refers to upgrading the system from the lower version to the advanced system version);

Select the drive letter for system installation, Next;

The system starts to enter the installation, during the installation process, the computer will restart, no need to do anything else, wait patiently and ensure normal power-on;

W7 has a different disk mechanism with XP, you want to simply format the C disk and reinstall it will find that Win7 is still there, back up the data, use an XP system disc (not the Ghost version) to delete all the partitions, repartition, and then reinstall the system.

Use a USB flash drive to install the PE system, then format the C drive, and then install the system image to the C drive.

Look at your question to know that you are a novice.,Novices want to learn the system or watch other people's live broadcasts.,Anyway, you're a student.,Let your classmates help again.。。

Format the partition and install the system. Or choose to format the partition when installing the system.

Obviously, there is no space on your C drive, and the program that is unzipped and installed needs to be released in the temporary folder of the C drive and then installed, so the extraction fails.

You can delete the XP folder in the same directory, and the original XP system file will be brought after Win7 is installed. The file suffix of old can be deleted directly and manually without reinstallation.

Just reinstall it, and it will automatically format the C drive.

Under DOS, format the C drive, and you can reinstall it!