-
Many people may think that clearing data on iPhone is just to directly choose to erase data in Settings-General-Restore? Is it necessary to go through such trouble? If you think so, then you are very wrong, because as long as someone who knows a little bit of technology may recover your private data!
Method: First of all, before changing your iPhone, you must transfer your data. The transfer method can be transferred directly using iCloud, but the waiting time is particularly long.
Therefore, it is recommended that you use iTunes to back up the data on your old iPhone first, and then use iTunes to restore it to the new iPhone directly.
The next thing is to log out of your Apple ID, even if you don't sell it, then it is a very troublesome thing to give away the iPhone that has landed on you. So be sure to withdraw your ID before selling. Steps: [Settings] - [iTunes Store.]
Turn off Find My iPhone. Go to [Settings] - [iCloud] - [Find My iPhone] and enter the password to turn it off. This also turns off Enable Lock at the same time before you can erase the content on your iPhone.
And it's done to put your buyer at ease.
iCloud Keychain is also recommended to be turned off, steps: [Settings] - [iCloud] - [Keychain] to turn off [iCloud Keychain]. Then go to Restore in Settings and choose to erase all your data and content.
If you are not worried, you can also restart it again to see if the reset is successful.
Finally, if there is really no missing backup data, in addition to [iCloud] and "iTunes", these two well-known ways, you can also use Apple Huifudashi to scan your phone to retrieve it.
-
Before the iPhone completely cleans up the data, you need to turn off the Find My iPhone function, and then select Erase All Data in the General Restore Interface. The details are as follows: 1. Click Find My iPhone in the iCloud interface of Settings to enter, as shown in the figure below2. Turn off the Find My iPhone switch, as shown in the figure below3. The system needs Apple ID verification, enter the password, and click Close, as shown in the following figure4.
5. In the general interface, pull to the bottom and click Restore, as shown in the figure below6. Click Erase All Data and click on the Restore interface to enter the verification password as prompted, as shown in the figure below.
-
A factory reset will do the trick.
-
Steps to erase all data from this iPhone for iPhone:
Tools Raw materials: iphone13, settings.
1. Go to iPhone Settings and open General Settings.
2. Scroll down to the bottom of Settings and turn on [Erase or Restore iPhone].
3. At the bottom of the settings, select and click [Erase All Content and Settings].
4. In this interface, you can see that if you click Continue and choose to erase the iPhone, it will erase all the contents of the current phone, including **, contacts, APP data, and log out of the account to restore the phone to the factory state.
-
With the update speed of Apple mobile phones so fast, many friends have just changed their Apple mobile phones for more than half a year and new ones have been launched, so many friends will sell their old Apple mobile phones, so what to do with Apple mobile phones before they are sold? Here are three things you need to do to sell your phone.
1. Cancel AppleID: People who have used Apple mobile phones know that every user must have an AppleID, that is, Apple is traveling stove, this account can allow you to use the appleID in the appstore** genuine software, even if you change to a new Apple device, this still has to be used. So before you sell your old iPhone, you must remember to unregister AppleID first.
2. Log out of iCloud: In addition to AppleID, there is also a cloud space to log out of the Apple mobile phone, which stores a lot of information about the use of our mobile phone, so before the mobile phone is discarded, you need to cancel the iCloud account to protect your privacy.
3. Clear content settings: It is to clear the data and settings of the iPhone, a bit like the operation of formatting the mobile phone, which not only protects your own information, but also facilitates the next user who uses your mobile phone.
Because when you use your mobile phone, you store a lot of your personal information, so you must clear the information content before selling, you can refer to the above processing methods, I hope the town head can help you.
-
It can be thoroughly cleaned up by formatting the factory settings here:
1. Turn on your Apple phone and ensure that it has sufficient power;
2. Find the settings button on the desktop and click to enter;
3. Find the general option in the settings and click to enter;
4. Next, find the restore button at the bottom and click restore;
5. Choose to restore all settings or choose to erase all settings and content according to your needs;
6. Enter the password you set, which is the same as the boot password;
7. Finally, select Erase iPhone to restore factory settings successfully.
-
Before the iPhone completely cleans up the data, you need to turn off the Find My iPhone function, and then select Erase all data and content in the general restore interface. The details are as follows:
1. Click Find My iPhone in the iCloud interface of Settings to enter, as shown in the figure below.
2. Turn off the Find My iPhone switch as shown in the figure below.
<>4. Then enter Settings - General, as shown in the figure below.
5. In the general interface, pull to the bottom and click Restore, as shown in the figure below.
6. Click Erase All Data and Content on the restore interface, and enter the verification password as prompted, as shown in the figure below.
-
It's safe, erasing all content and settings is mainly to erase all settings, apps, data, etc. in iOS. It is often referred to as "factory reset". When you use this feature, your phone will be the same as when you first bought your new phone.
Before the old phone**, remember to connect the computer and use iTunes to back up. After that, you can directly restore this backup with a new iPhone, so that the two phones can switch seamlessly.
After the iPhone erases the data, the data can be completely erased, and the erase method is:
1. First of all, you need to open the "Settings" of the Apple phone, as shown in the figure below.
2. Swipe up and click "Touch ID & Password", as shown in the figure below.
3. Next, you need to enter the password, as shown in the figure below.
4. Next, you need to swipe up on the screen.
5. Click the button on the right side of "Erase Data".
6. Finally, click "Enable", as shown in the figure below.
-
After the iPhone erases the data, the data can be completely erased, and the erase method is:
1. First of all, you need to open the "Settings" of the Apple phone, as shown in the figure below.
2. Swipe up and click "Touch ID & Password", as shown in the figure below.
3. Next, you need to enter the password, as shown in the figure below.
4. Next, you need to swipe up on the screen.
5. Click the button on the right side of "Erase Data".
6. Finally, click "Enable", as shown in the figure below.
-
Can be completely removed.
iOS data is also encrypted, and it is impossible to recover it after erasing.
-
The data will not be completely erased. There will be safety problems when encountering bad second-hand users.
-
Yes, don't worry! Apple phones should be safe in this regard.
-
It will definitely be able to recover, it depends on whether he is willing to pay the cost.
-
Yes, no, Apple is very private.
-
There are two ways to erase all data and settings on your iPhone, one is to erase all data, go to Settings - General - Restore - select Erase All Content and Settings.
-
I want to completely delete the data in my iPhone and can't recover it. Can it be done?
-
Make model: iphone13
System: Taking iPhone 13 as an example, Apple wants to delete data before selling the phone and restore the safest factory settings. It is divided into 2 steps, and the specific steps are as follows: 1 Go to Settings General Open your phone's settings and tap General Options.
2 Select Erase All Content and Settings Tap Transfer or Restore iPhone, tap Erase All Content and Settings, select Continue, and follow the prompts to finish.
No, the data in the previous system will be automatically deleted after the flashing is successful, [Suggestion: Copy important files to the computer or backup with titanium before flashing, and back up this system]. >>>More
1.If you set the pattern signature unlocking method, you can use the PIN code set when drawing the pattern signature. Operation: >>>More
1. Generally, Xiaomi is registered with a mobile phone number or email number, and the mobile phone number or email number is Xiaomi's. After registration, the system will randomly assign a set of numeric IDs to the user, so as to avoid the user's mobile phone number or email number being leaked, and only a set of numbers will be displayed on the mobile phone. >>>More
1、iphone——**。
2. Click the button in the upper right corner. >>>More
On the two mobile phones, then log in on the old phone, select the backup method according to the prompts, perform the backup operation, and then use the same login on the new phone, select the synchronization method, and complete the synchronization operation.