Is there a chipping ball base plate under 220 yuan?

Yes, there is a race change (long glue special board) of the World Aode 220 or less. The others are Koji Matsushita for about 260 yuan and Zhu Shihyuk for about 400 yuan.

The cheapest can use the Galaxy 961, which generally does not exceed 40 yuan.

1. All the bottom plates: If you want to choose the bottom plate, you must first choose the capture method! Straight shot and sideways fear!!

Depending on the auction you choose, decide whether to sell long or short! Choose the quality of the bottom plate, I remember my coach said that the kind that will absorb sweat, so it is not easy to be afraid (that is, the racket is too slippery, and the racket is off when playing) It is good to choose black on that wood, and I forgot what kind of wood it is, as if to say what mahogany!

As for the glue layer! Choose thick, elastic, and sticky!

Since you are playing a chipping ball, of course, the strength is not as fierce as a smash, you can only use elasticity to compensate for the strength of the ball, and the stickiness determines the rotation of the chipping ball you hit.

It is better to use 5 layers of pure wood bottom board.

You can choose: Butterfly Zhu Shihyuk, Butterfly Matsushita Hiroshita.

2. Yura Chen Satellite, Butterfly Jin Jing'e, Galaxy 980, Galaxy LQ-2, etc.

Choose a thick adhesive layer with good elasticity.

The W6 baseplate is good, and there are many other options to choose from, such as the Galaxy's U-series M-series, etc.

W6 can, it's softer, the rubber selection 729-2 is more mainstream, and the backhand focus is 1

Forehand focus 3, backhand introspection.

1. All the bottom plate: First of all, the bottom plate selected for chipping is because it is necessary to reduce the power of the ball, so it is necessary to choose a softer bottom plate, and secondly, it can not be too thick, because the thickness of the plate is poor, it is not easy to control, and the softness has also decreased, and it is recommended to control it below 6mm, and finally, the pure wood bottom plate is selected, what is carbonized, and the hardness of the fiber is large, which is not suitable for chipping.

Rubber: It is recommended to choose a thin bottom skin and sponge, which is easy to control and stable to chip. However, it can be configured according to your own playing style.

729's 563 raw rubber, 799 semi-raw rubber long rubber (not easy to control), these must be determined according to their own playing style (the first two are recommended), there seems to be a "fast sticky light C" type set of rubber bottom skin, soft sponge, is anti-glue, can be appropriately attacked, and suitable for chipping, about 38 degrees. You can go around on your own.

The base plate is specialized in the base plate for chipping balls

Rubber generally plays the forehand with the reverse rubber, which is conducive to the offense The backhand can use raw rubber or long rubber to create rotation

The key to practicing chipping is to be able to withstand the big board, seek change in stability, combine turning and not turning, and combine defense and offense

Raw rubber is good, one side is negative, one side is raw, and the other side is good.

Yuan Yixing Table Tennis Teaching Techniques Episode 76: Chipping (II).

The cheapest base plate suitable for chipping is the Galaxy 961, which has good control, ** generally not more than 40 yuan.

If you still prefer to use butterflies, we recommend a chipping board called Stephen. Butterfly Junki is used by many of the world's top chippers, and it is about 100 cheaper than Koji Matsushita

The base plate used for the combination of attacking and slashing is usually a large five-wood baseboard, which makes the cricketer softer and has a longer time of possession. The board surface is more so that the center of gravity of the ball is moved forward, which is also conducive to the force of hitting the ball off the table.

Chipping is of course a defensive type and the bottom board is generally softer.

Now most chippers also want to attack unbridled, such as Zhu Shihe, backhand long rubber chipping, forehand occasionally sharpening, but forehand pulling technique is also quite good! (Hehe, I also play this way) choose a cheaper one with Leo's chipping ball No. 1, and better is the butterfly board used by Zhu Shihyuk!

Or use Zhu Shihe ST bottom plate, the forehand recommends the softer set of glue of Tianji 3, and the backhand uses 729 single long glue, or a single positive glue, recommended C8, which is very easy to use.