oppor11s what does volte mean above

Oppor11s can be used to dial ** with data traffic.

VoLTE stands for Voice

OverLTE is an IMS-based voice service. It is an IP data transmission technology, which does not require 2G and 3G networks, and all services are carried on 4G networks, which can realize the unification of data and voice services under the same network. In other words, the 4G network not only provides high-speed data services, but also provides high-quality audio calls, the latter of which requires VoLTE technology.

The most direct experience of VoLTE technology for 4G users is the shorter waiting time for connection, as well as higher quality and more natural voice** call effects. VoLTE is fundamentally different from 2G and 3G voice calls. VoLTE is an end-to-end voice solution based on all-IP conditions on a 4G network.

Compared with 2G and 3G voice calls, VoLTE can improve the voice quality by about 40% because it uses high-resolution codec technology. VoLTE brings users a lower access latency (waiting time after dial-up), which is 50% lower than that of 3G, which is about 2 seconds, compared to 6-7 seconds in the 2G era. In addition, at 2G and 3G, drops occur from time to time, but VoLTE's dropout rate is close to zero.

oppor11st is: A mobile phone model. R11ST also supports full Netcom.

OPPO R11 is a ** smartphone officially released by OPPO on June 10, 2017, focusing on photography. Improvements have been made in terms of hardware configuration and software optimization, especially in portrait photography. The pixels of the front and rear cameras of the OPPO R11 have been increased to 20 million, and the rear shooting uses a dual camera of 16 million wide angle + 20 million telephoto.

The OPPO R11T is mobile.

BAY4G+ mobile phone DU is the in-depth cooperation version of China Mobile. The OPPO R11T is a mobile customized version of the R11 launched by OPPO. OPPO R11T in packaging DAO

There is a logo of China Mobile and a logo back to 4G+ in the box. OPPO R11T does not support full Netcom. The Oppo R11T is no different from the Oppo R11 in terms of other device specs.

However, the OPPO R11T may give away additional perks.

t, and the other t stands for Mobile Customization. The difference between OPPO R11T and the full Netcom version is that when one of the two SIM cards installed on the R11T is a mobile card, the mobile card can use A4G 4G+ network, and the cards of other operators can only use 2G network calls. When there is no mobile card in the two cards, the SIM card of other carriers can be used normally.

OPPO R11T is a customized version of the mobile full Netcom model, when one of the two SIM cards installed in the R11T is a mobile card, the mobile card can use the internal 4G 4G+ network, the card of other operators can only use 2G network calls, when the mobile card is not installed, the SIM card of other operators can use the 4G 4G+ network normally.

OPPO R11T configuration introduction:

1. Basic parameters.

Listing Date: 06/2017.

Phone type: 4G phone, 3G phone, smartphone, camera phone, phablet, fast charging phone operating system: ColorOS based on Android II. Screen.

Touch screen type: capacitive screen, multi-touch.

The main screen size is inches.

Main screen material: AMOLED

The main screen resolution is 1920x1080 pixels.

The screen pixel density is 401ppi

Narrow bezel screen-to-body ratio.

3. Hardware. CPU model Qualcomm Snapdragon 660

CPU frequency.

The core counts eight cores.

GPU model Qualcomm Adreno512

Memory card, microSD card.

Expansion capacity 128GB

The battery capacity is 3000mAh

The charging time supports VOOC flash charging.

OPOPPR11 is a phone that supports the Volte function, which can be turned on through the settings.

Volte, or Voice over LTE, uses the LTE network for voice transmission during calls, which can provide higher voice and buried quality and faster call connection speeds. For phones that support VoLTE, a simple setup is all that is required to turn on the feature. For operators, if users use the VOLTE function, they also need a network that supports the function to achieve it.

For the OPOPPR11 phone, it supports turning on the VoLTE function in its settings. With this feature, users can feel clearer and more stable call sound quality, and at the same time, they can also quickly connect to the other party's mobile network to enjoy a better call experience.

It should be noted that when using the VoLTE function, users need to ensure that the carrier also supports the function, otherwise it may not be able to be turned on or used normally. In addition, when using the VoLTE function, it is also necessary to ensure that the network connection of the mobile phone is stable, and it is recommended to use this function with a power supply connected to improve the call quality.

In short, OPOPPR11 is a phone that supports the VoLTE function, which can be turned on in the settings and can benefit from clearer and more stable voice transmission. While using this feature, you also need to pay attention to the support of your carrier and the stability of your network connection. <>