1 5M broadband, how to get Internet access for three hosts!

1: Broadband is called ADSL, but it is not ** online network, it is the current broadband online network;

2: The wiring method is right;

4: You can choose to get it automatically, but this is good manually, so it is more stable, use start-run-cmd, enter ipconfig all in it to show the IP address assigned to each machine, and then enter it in the local connection;

5: Ibid.; 6: Each machine is about the same, but at the same time, the Internet will definitely divert these bandwidths;

7: If you go to the Internet at the same time, as long as someone uses **tool**, then there will be an obvious impact on the network speed, after all, the bandwidth resource occupies too much, which affects the speed of other machines to surf the Internet; It is recommended that the best time is that other machines are not turned on or do not access the Internet;

8: Telecom will not care about your routing, it belongs to the kind of door-to-door service that will not be seized regardless of the route, neutral state!

This problem requires you to pay some tuition, go and buy a good router, and you can limit the network speed of each IP from the route!

It is recommended not to use software that is in the nature of an ARP attack, as it is unwanted software that can attack itself along with it. Then your internet speed will be super slow, and the snail will be even faster than him

Software can be used to limit the bandwidth of each computer without interfering with each other.

Keyword "LAN traffic control".

This kind of software seems to have it, but the conventional approach is through its own routing or switching settings, and you should have a look at the route first.

You have to buy a good router with flow control.

There doesn't seem to be such a software, but you can run a software on one computer that limits the connection speed of other computers, such as P2P Terminator or something.

After installing the router, you can't use dial-up to connect to the Internet.,Uninstall the login client.,It's useless.。

Open the router settings,There is a menu box with account and password,Enter your account and password,It should be noted here,Some routers need to be parsed by the number calculator to get a string of characters,This character is your real account,The account box is filled in with what you parsed out instead of the original account,There are a lot of number calculators on the Internet,Find it yourself,I'm afraid I'll give you a virus,Other things basically don't need to be set up。

That's basically it.

You can simply ask if one host brings two computers.

Lu You can't be a baseline.

Set a username and password in the router. Just let him dial the number automatically. No need for a computer to dial the number.

There's no need to dial up.,All set up dialing in the router.。

Enter it on the web page.

Enter your account number and password.

Start dialing from normal dialing, if you can't dial normally, try the following abnormal dialing.

There will definitely be one that can be on, as long as the router is turned on. , it's okay, there's no need to dial up one machine at a time.

Buy a router with a drive disk, install it, and follow the prompts inside. Other computers will be able to do it automatically.

It depends on what you need to control whether it's the speed of the internet or whether you don't let other computers access the Internet.

Restrict others with LAN control software.

Cyber Enforcement Officer Try. But it's hard to play right now. Find out for yourself.

One computer is faster than three at once, that's for sure

Generally speaking, the speed is good, we used to have four machines in 1m

If you just go online 512k to pull three units, it is enough, if you use an electric donkey, it will definitely be stuck.

The speed must be reduced, watching movies, playing small games is probably okay.

The broadband is output to the WAN port of the router after passing through the modem. The LAN port of the router is connected to the interface on the computer network card. Set up the route again.

There are two methods, one is through the router, the other is through the switch, I personally recommend the owner of the building to use the router, because the switch needs a machine as the host, so if you want two machines to go online, the host should be turned on, the host is not open, and the other can not be on the network, so it is more suitable for the formation of a large local area network.

As for the router, it's more convenient, two machines can be on at any time, the price is about 70-80, four LAN ports, that is, four computers can be on together, you see if there are two LAN ports, it's cost-effective.

In addition to the router, you also need two network cables, the length you can measure it, the network cable is connected to the LAN port, the router's cable is connected to the WAN port, and then enter the settings interface in the browser.

As for how to set it up, it's very simple, you can get it according to the literal meaning of the manual, if it doesn't work, just look at the information on the Internet.

Your internet speed is so there is no problem with playing online games and surfing the Internet on two machines, but it is absolutely not possible to watch online TV, and you can only watch it on one machine.

Yes, you can connect.

Routing is required. The setup method is as above.

Yes, just use a router to divide it.

Add the router and you're done. Or just plug in that one's Internet cable.

The other two are connected via a hub and a host! This way the host should be on all the time! Unless you buy a 5-port router.

If your cat has a routing function, connect the network cable from the cat to the uplink of the hub, and then connect the computer to the hub. The IP address of the computer is set to the same address range as the modem, and the gateway is set to the address of the modem. If not, then replace the hub with a router, which is the same hair extension.

Once you're done setting up your router, you're done.

With a router, you can use three computers to access the Internet together without a host.

It is also possible to add a switch. Huawei's cats have a routing function.