How to remove the seat when washing the car car?

1. Generally, the front seat slideway is placed last, and the front two screws can be removed, and then the slideway is slid to the front and the back two screws can be removed;

2. Remove the airbag line, the safety belt alarm line is on the line, the rear row is to remove the seat cushion first, generally the seat can be lifted up, you can remove the two buckles, while pressing back, you can remove the seat cushion while lifting it up;

3. If the backrest is removed, you need to put down the back backrest and then take a screwdriver against the rotating shaft to disassemble it.

1. Remove the handrail screws with the sleeve and remove the handrails.

2. Remove the plastic cover of the seat adjustment knob with Huyaqi, remove the base screw with the sleeve, and remove the front seat to complete the decomposition.

3. Remove the elastic band connected to the seat and take out the front seat.

4. Disassemble the back plate screws, remove the front backrest back plate, and the front seat back is disassembled.

Generally, there is a button next to the seat, at this time, you only need to press the button, and then pull, the handle can be turned forward, and finally pushed forward, and the row can be removed by folding.

Generally, the front row sits on the slideway, and finally you can remove the two screws in the front, and then slide the slide to the front, remove the two screws in the back, and then remove the airbag line, and the safety belt alarm line can be, but I recommend that it is best to go to a professional 4S shop to remove the thread, because sometimes even if you remove it yourself, you will not be safe.

Generally, everyone puts a jacket on the seat, so you can directly loosen the rope and remove it, if there is no jacket, then there is no way to remove it.

You can go to the corresponding place to maintain the car to unload, and these places will not cause too much damage to our car, it is best not to deal with it blindly by yourself.

Generally, when you go to a professional 4S shop, it is a professional person to unload it for you, and it is best not to unload it yourself, because it is not easy to install it after it is removed.

Remove the armrest screws with the sleeve, remove the armrest, remove the plastic cover of the seat adjustment knob with the tiger teeth, remove the base screws with the sleeve, remove the front seat to complete the decomposition, remove the elastic band connected to the seat backrest, take out the front seat seat, remove the back plate screws, remove the front backrest back plate, and the front seat back is disassembled.

Car seats are an important part of the vehicle, and the function of the car seat is not only to provide a seat for the driver, but also to be an independent body composition, which is also closely connected with other systems. Car seats are made of different materials, and the common types are leather seats and flannel seats.

How to install the car seat cover.

Take out the car cushion in the front row, put it into the cushion vest, put on the seat cushion head cover, take out the chuck, install the chuck, plug the chuck into the gap, jam it after stuffing the chuck, clamp the chuck, adjust the cushion apron, clamp the elastic band of the car seat cushion apron, and put it into the car seat cushion headrest.

At this time, the front row installation of the car cushion has been completed, the installation buckle is clamped with the elastic band, the position of the cushion is adjusted, the rear car bench is installed, the armrest is ready to be inserted, and then inserted when pushed into an oblique angle, and the armrest is pushed back, and it is best to install the backrest buckle that was originally installed, both sides must be clamped, and finally adjust the overall feeling effect on it, and the rear seat cushion installation is completed.

According to the different models, the disassembly method of the seat is also different, taking the Corolla model as an example, you can reach in and touch the place where the base and the backrest meet, there is a place inside that is stuck, press it a little harder, lift it up to disassemble one side, and use the same method on the other side to remove the seat cushion.

Find the fixing bolt first and remove it.

Generally, the front seat slideway is put last, you can remove the front two screws, and then slide the slideway to the front, remove the back two screws, remove the airbag line, the safety belt alarm line on the line, the rear row first disassemble the cushion, the general seat is lifted up, you can remove the two buckles, while pressing back, you can remove the cushion by lifting it up, and if you remove the backrest, you need to put down the rear backrest and then take a screwdriver to resist the rotation shaft to dismantle.

Usually the car seat adjustment switch is located on the side of the seat, the seat adjustment switch is divided into manual adjustment and automatic adjustment, although it seems to be very different, in fact, their function and principle are the same, but the control mode changes.

Fabric seat care.

Due to the characteristics of the material, the fabric seat will have large fiber holes, so it is best not to eat or pile up sundries in the car. If you have to do it, be very careful not to let fine food crumbs fall into the car. Because if food particles fall into the fiber holes, it is difficult to detect and clean up in time.

If it takes too long, mites or other microorganisms will breed and cause the environment in the car to deteriorate.

Fabric seats can easily get dirty, but they are not as difficult to clean up. If it's not particularly dirty, just use a brush and a hand-held vacuum cleaner to clean up, brushing the surface while vacuuming to remove fine debris.

If it is an electric seat, remove the switch wiring harness plug and the seat load sensor plug, you can separate the seat from the chassis and take off the seat. As for the adjustment, there is a corresponding switch, which can be adjusted after installation.

First, the disassembly method:

On both sides of the head of the rear seat, near the window, there will be handles, pull the handle, the backrest of the rear seat can be turned forward, and most of the cushion parts of the rear seat are squeezed directly to the rear of the car, and then lifted up to come out.

Second, the rear seat lifting method:

1.Under the heads on both sides of the rear seats, there is a switch to push forward after pressing it, 2Foldable backrest, open the rear trunk under the seat (if you can't see it, it may be pressed under the seat) There is a black strap to pull back and lift the seat up, 3Attach the hook to the front seat header and adjust the strap.

Do I need to remove the seat when changing the seat cushion in my car? Need. Inspect and disassemble the seat and door panels.

To replace the leather seat cover, the original seat must be removed first, and the original seat cover can be removed, and many cars have to remove the door panel. Double-check that the original seat door panel is intact. Once you have made sure that the door panels are intact, you can remove the seat and door panels.

The gray installation of the seat is very important, and the tool should be dedicated to the car, because the car has strict requirements for the safety of the seat in the manufacturing, and it is difficult to remove the seat without special tools. If the fabric seat is changed to leather, the professional leather store can do a good job, and the microfiber leather can be chosen economically.

If it's durable, choose genuine leather. It's still the old saying that you get what you pay for.

When the weather is warm, it's time to replace cotton pads with single pads in the winter. Our JJ rear seats are different from the headrests of other models. Therefore, the rear seats should be removed to replace the seat cushion. It's annoying. Changing pillows every winter and spring is a headache.

things. I think our family will be miserable and now we don't have to remove the seat when we change the rear seat cushion of JJ.

<> the installation of the front seats is practically unobstructed. You can follow the instructions to install it. There is a rubber plate that is attached to the bottom of the seat, and a cover plate that is fixed to the bottom of the seat.

Find the hanging position of your hand, push the hook forward, and remove it. The seat cover may cover that part of it. The rear seats are the most important issue.

It must be removed.

In order to match the denim to the seats, the layout was first made to the dimensions of the original model, and then the hood was wrapped according to the version. The layout must be particularly accurate, especially in the corners. Any mistakes will affect the aesthetics.

The correct choice of leather material should also be taken into account when cutting. The surface of Wagyu is the best part of the cow and is usually used for the backrest and cushion of the seat, because these two parts of the seat are squeezed and rubbed for a long time, and the skin is not good for the tripe.

Wagyu neck is often used for sitting skirts or areas that are not easy to see.

Seat covers can reduce the sense of class in the car. If you buy a more advanced car, leather seats, seat ventilation and heating, massage and these functions will be equipped, and the additional seat covers will only affect their use, so that only high-end cars have leather seats into fabric seats, and the leather seats themselves are very dirt-resistant. It also plays the role of fixing passengers on the seat, only fixed on the seat in the car when an accident occurs will not cause greater damage, if the seat cover is increased, it is equivalent to an extra layer of sliding cloth between the seat and the human body, and the fixation of the human body is definitely not as good as the original seat.

Seat covers and cushions are often produced by small companies, even in family workshops, where comfort is often not a concern but only on fit and aesthetics. And many seat covers and cushions can also compromise breathability, further reducing comfort during the hot summer months. That's why many cars are now equipped with seat covers, first, we have a tradition of cherishing things; The second is that some seat covers are really good, not only coordinated with the original seats, but also have functions such as massage, support, ventilation, heat insulation and warmth, etc., which is difficult to dislike.

I would recommend that the exterior of the seat be old or broken, and many models nowadays will be equipped with side airbags, and the side airbags are installed inside the seat. Blasting from the seat's reserved stitching at the time of the accident.

If the seat cover is installed at this time, the airbag will be restricted by the seat cover, and it will not be able to protect the passengers in the first place. It's the same in winter, if the car has heated seats, adding a seat cushion is like scratching the boots, and then it doesn't work. The edging stitching on the cushion to prevent deformation is usually stiff in order to maintain its shape.

The friction we use on a daily basis can cause scratches and scratches on the surface of the lower seat, and the gains outweigh the losses. The leather surface of the tripe and neck is poor, and it is generally used on the skirt of the seat or the part that is not easy to see. Leather and cloth have a certain stretching direction, and some leather chairs appear concave and convex after sitting for a month or two, mostly because of the improper cutting direction of leather.

Of course, the car does not need to be disassembled to replace the seat cushion, and the seat will basically have a cover, and you can take this cover off and clean it directly, there is no need to use it so complicated.

Personally, I don't think there is a need to disassemble the seat, after all, I think that relatively speaking, the general car is relatively convenient, and there is no need to disassemble it at all.

No, you don't. Because the seat cushion is strapped to the seat, there is no need to remove the seat to replace the seat cushion.

No, just install the car cushion on the seat.

It should need to be removed, because the cushion itself is connected to the seat, and it needs to be removed if you want to replace it.

It is necessary to disassemble the seat, but it does not need to be completely disassembled, mainly depending on what the cushion you buy looks like and how it needs to be tied to the seat.

There is no need to disassemble the seat, and now the design of the seat cushion is very good, and it is impossible to make such small mistakes, and it is very easy to install.

Hello friend. The car seat is fixed by four screws, which can be removed with a wrench, and it is enough to align the screw holes when installing.