How can I improve the comfort of my car seat?

Adding a lumbar pad to the back of the waist is absolutely effective, and it will be very comfortable to lean on the waist, and there are many of them sold on the Internet.

Modified, if you don't change the engine, change some wax, and burn better. The most direct thing about comfort and handling is shock absorption, and the softer ones are comfortable to sit on, but the handling is not good. Change the hard point, the handling and safety can be guaranteed, the interior depends on your hobbies, change the seat when the action is large, and change the seat cushion when the action is small; It depends on what kind of car you have.

The material and function of the seat, the quality of the audio, the intelligent type of air conditioning, the shading of the sunshade glass, and the softness of the suspension are all related to comfort.

It's just to change to a better chair, the chair is in direct contact with the body, so the chair is comfortable, and the body is comfortable.

It is only recommended to do soundproofing. Then accept. Anything else is not recommended. If the suspension is stiffened, it is uncomfortable, and if it is softened, the handling is not good. It's not safe anymore. Then there's the seat fight.

Comfort is a comprehensive concept, is a system engineering power, gearbox, chassis, suspension, cabin shape, glass, seats, tires, suspension, audio, air conditioning, electronic configuration, noise, are directly related to the comfort type.

Just do an NVH test, look at his vibration amplitude, frequency and other parameters, in addition to ergonomics, this aspect is to do subjective evaluation, you have to experience it yourself!

Volkswagen seats are less comfortable than Hondas, and driving long distances is uncomfortable. It doesn't work even if you get a mat.

The inclination angle of the seat cushion is just enough to make the thighs fully contact the seat without suspension during normal driving.

The back of the seat is adjusted forward and backward to the front of the arm, and the horizontal stripe of the rear wrist is just over the steering wheel.

The seat is so low that the front edge of the canopy is just visible to the eye.

The steering wheel should be lowered as much as possible, but it should not affect the movement of the legs. The upper edge of the steering wheel is unobstructed against the instrument cluster.

In addition, a lumbar support should be added under the seat, otherwise it will hurt your back for a long time. This is indispensable.

Car seats are adjusted as follows:

Backrest angle. Once you're in the car and sit down, bring your hips back together and adjust the angle of the backrest first in a more standard sitting position. The angle of the backrest determines the comfort level of long-distance driving, and it is also very particular. The angle of the backrest must not be adjusted to the degree of reclining, although this is very comfortable, but it will increase the hidden danger of driving, and it is too late to react to accidents.

The correct angle should be to lean back and seat cushion at a slightly greater than 90-degree right angle, with the body leaning back slightly to help relax. If you are driving long distances, it is best to place a cushion to fill the gap between the waist and backrest, relieve back pain, and drive more comfortably.

Seat height. The height of the seat should ensure that our vision will not be blocked by the steering wheel, so adjust the seat as high as possible to have a wide field of vision, and we can see more things, which increases driving safety. But make sure you keep your head and the roof at a fist and a half (at least one punch) away so you don't hit your head even if the road is bumpy.

Seat front and back. I believe that many people have found that car owners with more driving experience have the habit of adjusting the seat backwards. But the front and back of the seat depends on whether we can easily press the pedal to the end. It is not difficult to drive at this distance, and the airbag can be effectively deployed in the event of an accident.

HeadrestHeadrests are a place that many car owners tend to ignore, most car owners feel that the headrest does not have any practical effect, or put the headrest on the neck, and the neck will be more comfortable when leaning back. However, this position is wrong, and it is easy to sprain your neck when something happens.

The correct position of the headrest is at the back of the head, which is the safest position. Driving doesn't make your neck feel sore, and it also avoids the most fragile neck from being hurt. It will not affect the field of vision of driving, and the sense of comfort is relatively strong. Is your seat adjusted correctly?

If the car owner wants to adjust the car seat to the best position, it also needs to be decided according to the car owner's personal figure, you must know that everyone's height is different, and then adjust the height and front and rear distance of the car seat will be different. For example, the height of the car seat is different, which will affect the driver's field of vision, and in general, the driver's field of vision is more suitable in the middle and upper part of the front window.

In daily driving, we often need to sit in the car for a long time, so it is necessary to adjust the seat to the most comfortable driving position, which can relieve driving fatigue. So how do you adjust your car seat to the most comfortable position?

There is at least a fist between the head and the roof. If the seat is adjusted too high, the head will easily touch the roof when it is bumpy, which will affect the driving. But don't go too high, because when you're bumping, your head is likely to hit the roof, and if you're too high, the dashboard may reflect and refract, affecting your ability to read the information on the dashboard.

Adjusting around the steering wheel, depending on the height and arm length of different people, it is necessary to consider that the hands are naturally extended and rotate easily, while the elbows and shoulders are relaxed. The height of the steering wheel is about 10 cm below the shoulder. When the driver's eyes are at eye level, the line of sight can fall on the center line of the front windshield to maintain the best possible view.

Once you're on the bus, you'll want to be clear about the order of adjustments. The first thing you have to do is adjust the height of your seat, sit up straight in front of you, and have a good view from the outside. If the owner wants to feel comfortable while driving, the lumbar support should not be too high or too low.

When adjusting the seat, you also need to adjust the headrest of the seat, and it is best not to move the headrest too far from the head.

When adjusting the height of the seat, do not go too low, otherwise it will block the view of the dial and steering wheel. Try to make sure that the driver's eyes are in the upper middle of the front windshield at eye level. When the car owner adjusts the distance between the front and back of the seat, the legs should not be stretched too straight, otherwise it is not conducive to the car owner stepping on the brake and accelerator.

Try to keep the distance between the seat and the steering wheel moderate. After the up and down adjustments, the next step is to adjust the steering wheel. There are two principles for adjusting the steering wheel.

One is to keep the steering wheel from blocking the information on your dashboard, and the other is to avoid touching the steering wheel with your knees.

It is necessary to decide according to one's own body shape that each person's body is different, and the way of adjustment will be different. Ah, feel comfortable during this process, and the support of the waist should not be too low, not too high. When adjusting your seat.

Don't put your head and headrest too far apart. Adjust the seat height not too low, otherwise the view will be blocked by the steering wheel.

The first thing you should do is adjust the height of the seat. The length of your arms can be placed on the steering wheel. You can also choose to adjust it back and forth. The second is to keep a distance of one to two circles on the top of the head, which is a very suitable distance.

First of all, you need to lower the seat height through seat adjustment, and then adjust the seat back a little more to sit comfortably.

The most comfortable way to adjust your car seat is:

1. Adjust the front and rear of the seat, adjust the position of the front and rear of the seat, so that the distance between the body and the steering wheel, clutch pedal, brake pedal and accelerator pedal is appropriate, so as to realize the convenience and flexibility of both hands on the steering wheel, and the legs can be retracted and flexible freely;

2. The adjustment method is to lift the adjustment handle at the lower right of the seat, remove the fixing device, the seat can move back and forth, and after the position is adjusted, release the adjustment handle to fix the seat;

3. Adjust the angle of the backrest, adjust the angle of the seat back, so that the seat back supports the waist, and do not let the waist sag, which can reduce the fatigue during driving;

4. The adjustment method is to rotate the adjustment button on the left side of the seat to adjust it according to your own figure, and tilt up to 1 to 2 sections. When adjusting, adjust the back tilt angle with the strength of your back until the palm of your hand can hold down the upper end of the steering wheel.

1. Adjust the seat up and down: The first step after getting into the car is to adjust the height of the seat according to your own height, keep enough space between the top of your head and the car (at least a fist distance) to prevent bumpy road sections, and don't make the line of sight too low. At the same time, the elbows and shoulders are relaxed, and the height of the steering wheel is about 10 cm below the shoulder.

2. Adjust the front and rear of the seat: press the clutch with your left foot and press the brake pedal (brake) with your right foot to the end, and keep bending at this time

It is recommended to find a Lexus and feel what ergonomics are!!

The right height is a prerequisite for good driving visibility, and the first step is usually to adjust the height of the seat, so that the head is at least a fist away from the roof. So that your head doesn't hit the roof of the car when the vehicle is bumpy. 、

How do I adjust my car seat? Adjust the seat back.

For daily driving, we recommend a seatback recline angle of 100-110 degrees, and when the backrest reclination angle exceeds 110 degrees, the disc pressure will be significantly reduced, which is an important reference for vehicles without lumbar support adjustment. After adjusting the height, many car owners are accustomed to adjusting the front and rear of the seat first, in adjusting the backrest, in principle, this is not much of a problem, but after determining the backrest angle first, it will be more convenient to adjust the appropriate distance between the front and rear of the seat.

How to adjust the car seat correctly? Keep these points in mind to drive comfortably to be safer.

There may be no answer. No one's comfort is different. Everyone's requirements for a seat are also different. Some people like to drive while lying down. Some people like to drive with a steering wheel. You can only debug it yourself until you feel comfortable.

For example, I want the backrest to be straight, and the waist and neck are straight

The height adjustment of the car seat The adjustment of the height of the car seat should be considered according to various factors such as the driver's height, arm length, and the position of the steering wheel from the body, and the optimal height of the seat should meet these conditions: First of all, the head is at least a fist away from the top of the car, and the seat is adjusted too high, and the head is easy to touch when the vehicle is bumpy.

2.Forward and Backward Adjustment of Car Seats First, adjust the distance between the seat and the pedals. If the distance between the seat and the pedal is large, the driver will be more comfortable with the leg, but the accuracy and force when pedaling with the foot will be the same.

3.Adjust the steering wheel Up and down, the front and back are adjusted, and the next thing is to adjust the steering wheel, there are two principles for adjusting the steering wheel, one is.

Most cars can.

Although the height adjustment of car seats is not a necessary feature, it is generally equipped with cars on the market today.

Car seats must meet the two major requirements of ease of adjustment and comfort. That is to say, the driver can adjust the seat to the best position to get the best view by adjusting the control, so that it is easy to manipulate the steering wheel, pedals, gear lever, etc., and can also get the most comfortable and habitual riding angle.

The adjustment of the seat can be done manually or electrically.

There are four parts to the adjustment of the seat that can be operated:

1. Adjust the seat up and down (if any).

The first step after sitting in the driver's seat is to adjust the height of the seat (if the seat cannot be adjusted, this step is omitted), this adjustment step requires the right headroom and roof space, and the line of sight is not too low. In general, if you can adjust it, try to keep enough space between your head and the roof to avoid hitting your head on the roof when the vehicle is bumpy and causing injury to yourself.

2. Adjust the front and rear of the seat.

The next step is to adjust the front and rear distance of the seat. At this point, you can use your right foot to press the brake pedal firmly as an adjustment standard, and if your right leg can remain bent and continue to exert force downwards without feeling uncomfortable due to bending, then the distance is more appropriate. If the distance like the one below is absolutely wrong:

After pressing the brake pedal, the right leg has been fully extended, so it is impossible to quickly and effectively press the brake pedal in an emergency, and the consequences can be imagined.

3. Seat back adjustment.

You can usually pay attention to observe, there are many people who drive with their arms stretched out when they hold the steering wheel with both hands, and the whole person is half lying and half leaning in the seat, which looks very comfortable, but in fact this is a joke about their own safety, because this posture cannot effectively control the direction of the vehicle.

4. Seat headrest adjustment.

The height of the headrest should be flush with the top edge of the auricle.

The height of the headrest should be adjusted to be parallel to the head, and the soft part of the middle of the headrest should be parallel to the upper edge of the auricle, so that when the vehicle is hit violently, the role of the headrest to protect the head and cervical spine can be maximized.

Keep the distance between the head and the headrest as small as possible.

The smaller the distance between the head and the headrest, the greater the cushioning and protection of the head and neck. This spacing is at most 2-3 fingers together at a width of 2-3 fingers together. In addition, we can also add a neck pillow to the seat to better protect the neck.

It is common to improve the comfort of the seat by changing the seat. To put it simply, the seats in the B-class are generally more comfortable than those in the A-class, and the seats in the C-class are more comfortable than those in the B-class.

Of course, that's not all. For example, the selling point of Nissan models is the comfort of the seats. Therefore, compared with Corolla and Lavida, the seat of Sylphy is softer, so Sylphy is also called a mobile sofa.

If you want to change the seat, there are many ways to get the original seat of other models, such as Xianyu and **, etc., if you find your favorite seat, and the size and size can also correspond to your original car, then, after the payment and receipt, go to the auto repair shop to find someone to install it on your behalf. This kind of manual cost is not expensive.

Now many car owners will modify the seats of their cars because of comfort, functionality and other reasons, according to the size and width of the car and some comfort and function needs to choose one or two front seats for modification, basically buy some dismantling parts, such as: Lexus, Crown, Mercedes-Benz, Alpha and other accident cars, soaking cars, scrapped car dismantling seats, Guangdong Chentian there are a lot of this dismantling parts. This kind of modification will be troublesome, the cost is not low, the technical requirements are very high, and more skilled technicians are required to process carefully and meticulously, but the effect after modification is very good, some have improved the comfort, and some have added some comfort functions such as electric adjustment, seat heating, ventilation, massage, etc.

If it's too much trouble and too expensive, there's one of the most labor-saving and cost-saving ways to add a soft cushion cover.