Where are the headphones set and where is the headphone mode set

The vivo phone can be used normally by plugging in the original headphones, and it does not need to be set up. The function of the vivo original earphone remote button:

1. Press the headset line control button to answer and hang up**;

2. Press and hold the earphone line control button to enter Vivoice;

or some third-party **** devices to listen to songs, press the headphone line control button once to ** pause the song, press twice to switch to the next song, and press three times to switch to the previous song (the song cutting function is only supported by some models).

Extend. The technology of headphones includes dynamic coil and moving iron, and the wearing of headphones is divided into, in-ear, over-the-head, and earbud. The in-ear type is easy to carry, and the noise reduction effect is much better than the earbud type, and the hearing sense is better than the earbud type, but the in-ear listening is more damaging to hearing, and the impact of the earbud type on hearing is smaller, and the head-mounted type is divided into fully enclosed, and the noise reduction effect of this fully enclosed is the best, that is, the sound insulation effect is good, and the sound field is the smallest in the head-mounted type.

There are also semi-open and fully open, fully open soundstage is the largest, but it requires a high-end front-end and headphone amplifier to bring out the headphone effect, such as Sennheiser.

HD650, HD800 (full open), Beyer Power.

With the DT880 (semi-open) and T1 (open), the sound quality of these big headphones is the most convincing.

Sennheiser and Beyerdynamic are recommended for brands, both of which are made in Germany. From tens of yuan to tens of thousands, it depends on what type of ** you like to listen to.

We often use our mobile phones to listen**, especially many times with headphones**, and the default key settings of headphones always do not meet our needs. So where are the headphones set on your phone? Let's introduce it to you!

The headset is set on the phone.

3. Click [Remote Function Setting];

Supplementary Information. Headphones (earphones; headphones; head-sets;earpieces are a pair of conversion units that accept the telecommunication signals sent by the **** or receiver and convert them into audible sound waves using speakers close to the ear. The headset is generally detachable from the **** device and is connected by a plug.

The advantage is that you can listen to the sound alone without disturbing others; It can also isolate the sound of the surrounding environment, which is very helpful for people who use it in noisy environments such as recording studios, bars, travel, sports, etc. Headphones were originally used for ** and radio, but with the prevalence of portable electronic devices, headphones are mostly used in mobile phones, walkmans, radios, portable video games and digital audio ** devices.

1.After inserting the earphones into the earphones, it will automatically jump to the earphone mode, and the earphone mode cannot be set, but the earphones will automatically jump to the external mode when the earphones are unplugged.

3.The plug and jack may be oxidized, wipe the phone jack and headphone plug with waterless wine.

4.The earbuds are not compatible with mobile phones, try unplugging one section of the earbuds and rotating the plug to adjust.

Taking the Huawei Honor 8 mobile phone as an example, the headphone mode setting method is as follows:

1. Turn on your phone, find the icon of "Settings" on the desktop of your phone, and then click to enter.

2. After entering the settings interface of Tanbend mobile phone, find the "Intelligent Assistance" column in the drop-down menu, and click to enter.

3. After entering the intelligent assistance, look for the "intelligent wire control" item and click to enter.

4. After entering, find the "Smart Line Control" column, and turn the switch on or off to set the headphone mode.

If you are using a vivo mobile phone, Super Audio supports external playback, and some models (such as iQOO 5 Pro) support headphone mode, which can be viewed by going to Settings - Sound & Vibration Sound, Vibration & Mute Key - (Sound Quality & Sound Effect) - Super Audio.

1. If the device is damaged, liquid and dust enters the earphone hole, which may affect the function of the earphone hole, please bring the device to the customer service center for testing;

2. Please try to plug in and unplug the earphones once to confirm whether the earphone icon display is back to normal. If you still have the earphone icon, you can try restarting your phone to view;

3. If the device uses a Type-C headphone interface, please confirm whether you are using a one-turn multi-charging cable or an unofficial headphone adapter cable, which may not be compatible with the device, resulting in the abnormal display of the headset icon, it is recommended to disconnect the device to view.

If the above methods fail to help recover, the customer service center needs to be tested and processed (customer service center address: enter vivo official website vivo**app--my--service outlets, after-sales outlets--select provinces and cities to query the address of the customer service center);

Tips: It is recommended to bring relevant purchase vouchers (such as: purchase invoices, warranty cards, ID cards) when you go, and consult the staff of the consultation center in advance to ensure that the staff go to Shanshou Tangerine during normal working hours, avoid empty running, and pay attention to safety on the way to and from the service.

The vivo phone headphone mode is as follows:Operating device: vivo X11

Device system: coloros

1. First, enter the desktop of the mobile phone and click [Smart Assist] on the settings page.

2. Enter the intelligent assistance page and click [Intelligent Line Control].

3. It can be seen that the [Intelligent Wire Control] mode is open.

4. Click the switch button at the back to turn off the [Smart Line Control] mode; So the headphone icon above is gone.

The position of the Apple earphone family cover in the mobile phone is as follows:

Tool: iPhone 8.

Operating system: iOS.

Set up a trillion to make trouble.

1. Tap Accessibility, go to the settings of your iPhone, find Accessibility, and click to enter.

2. Click Audio, find Audio & Visual in Accessibility, and click to enter.

3. Set the headphone balance, and you can set the headphone audio, background sound, sound balance and other settings in the audio and vision.

The function key of the earphone is at the top position of the Bluetooth headset.

The multi-bend function key of the Bluetooth headset is generally at the top of the Bluetooth headset. The multi-function key of the Bluetooth headset functions by pressing and holding the multi-function button until the red and blue lights flash alternately and enter the pairing mode.

The multi-function key of the Bluetooth headset can be used to answer and hang up**. The multi-function key of the Bluetooth headset can turn off the device and turn it on.

The functions of the headset are as follows:

When we listen to a song, we will definitely press pause**, start**, if you wear headphones, you can directly click on the middle groove of the headphones, you can achieve pause and start **song.

If you want to fast-forward a song, you just need to double-click the groove of the earphone, press and hold it and then release it. If you want to rewind the song, just triple tap the groove, press and hold it, and then release it.

The phone screen is too big, your hands are too small, and you can't press the middle shoot button when taking pictures. If you are wearing iPhone headphones, you can turn on the camera directly and click the + button of the headphones when you need to take a picture. Of course, when you exit the camera, press the + button or increase the volume. <>

The solution for adjusting the left and right channels of the headphones is as follows:

<>4. Click'level'tab, click on it'Balance'Button. Click the "Balance" button to adjust the volume of the left and right channels. It can be adjusted by moving the slider on the left front (or 1) or right front (or 2). Finally, click OK and you're done.

The volume adjustment of the headphones is very simple, because the volume design of the headphones is more obvious, and it is more convenient to use, and there is a symbol of addition and subtraction in the lower right corner of the headphone line, which can be reasonably adjusted according to the actual volume requirements, so that a good use effect can be achieved.

Wear it on your ears and adjust it properly. Headphones are pressure fields that regulate sound primarily by cavity volume and leakage control. The unit only needs to be relatively smooth and straight

You should adjust the headphone switch knob according to the required volume, and then you will feel that the volume is changing.

Refer to the specific operation method of the brand and model you use, or the operation method on the instruction manual.