Where is the charging mode setting of the Huawei phone

1. Charge the new phone for the first time and fully charge.

2. Don't wait until the low battery state to charge the battery, try to charge it as you use it to prolong the service life of the battery.

3. Please remove the charger in time after the battery is fully charged to avoid charging for a long time, otherwise the battery may be damaged or the life of the charger may be shortened.

4. Please try to use the standard charger. It is advisable not to replace unofficial batteries.

The flash charging mode of Huawei mobile phones does not need to be turned on, as long as the original charger is used, it is flash charging if it is used normally.

2.You can check the original charging head of the mobile phone, if there is the word "super charge" under the charging head, then it can support flash charging.

3.The charging head of flash charging and normal charging is not the same, and the specifications are also different. The following picture is a comparison of the charging head for flash charging and normal charging.

4.In addition to using the original charger, the flash charging mode also needs to be matched with the original data cable, and the flash charging is that there is a 5A logo on the data line.

5.The data plug that supports flash charging is different from the material of normal charging, and the jack of the flash charging data cable is made of purple material.

This does not need to be set, it will automatically disconnect after charging is completed, protecting the battery from overcharging, hurting the battery and dangerous situations!

So don't worry, you don't have to set it up, it's a self-insurance program controlled!

What is my phone's charging mode set in**? I think it's still in the settings key, and it should be found in the function settings settings.

Huawei's mobile phone manager finds the battery inside, and the truth is that there is a charging mode in it.

The charging mode setting of Huawei phones can be set in the phone settings.

Here's how to set up fast charging for Huawei phones:

1. First, click Settings in the desktop of your phone.

2. Then find the battery and tap on it.

3. Then click to turn on the super power saving switch.

4. Then click on the app to start management.

5. Then click the switch to turn off some programs that consume a lot of power.

6. Finally, connect the phone to the charger and start charging.

Circuit features of fast charging:

1. After the output voltage is set (such as 36V), if the charging bottle plate falls off and is disconnected, causing a group of batteries to be unconnected, or there is a short circuit, the battery terminal voltage will be reduced or zero, then the charger will have no output current, if the set voltage is 36V, misconnected to 24V, 12V, 6V batteries, etc., the charger has no output current.

2. If the two output terminals of the charger are short-circuited, the trigger circuit of the SCR in the charger cannot work, so the thyristor is not conductive, and the output current is zero.

3. When using the battery, the positive and negative poles of the battery are mistakenly reversed, the thyristor trigger circuit is reversed cut-off, there is no trigger signal, the thyristor is not conductive, and the output current is zero.

4. The use of pulse charging, is conducive to prolonging the life of the battery, because the low-voltage alternating current is pulsating DC after full-wave rectification, only when its peak voltage is greater than the battery voltage, the thyristor will be turned on, and when the pulsating DC voltage is in the trough area, the thyristor is reversed to cut off and stop charging to the battery, so it is pulsating DC that flows through the battery.

5. Fast charging, full self-stop, because the voltage at both ends of the battery is lower when the battery is just started, so the charging current is larger, when the battery is about to be sufficient, because the charging voltage is getting closer and closer to the wave peak of the pulsating DC output voltage, the charging current will be smaller and smaller, and it will automatically become trickle charging, and when the voltage at both ends of the battery is charged to the maximum peak value of the rectifier output, the charging process stops.

6. The circuit is simple, easy to make, and there is almost no need for maintenance and repair.

Here's how:

1. The first step is to turn on the settings function of your Huawei phone.

2: Tap on the Advanced Settings option.

Step 3: Step 3, click on Battery Management.

Step 4: Step 4: Select the power saving mode.

5: Tick Super Power Saver so that the phone enters fast charging.

Phone fast charging does not support settings.

If you are using a charger that comes standard with Huawei and your phone supports fast charging, it will automatically enter fast charging mode when you connect the charger.

Fast charging on Huawei phones cannot be set, and when charging with a fast charger, the fast charging function is turned on by default and cannot be manually turned off by a switch. Charging icon when the phone is charging for normal charging, fast charging, and super fast charging.

If the phone supports the accelerated charging function, when using the original charger, the mobile phone screen is turned off or the device is turned off. Some machines need to turn on the accelerated charging function separately, and the opening method is: Settings - Battery - Fast Wired Charging - Turn on.

Extend. Huawei mobile phones: Mate series, P series, Nova series, Maimang series, and Enjoy series.

1. Mate series.

The first series of Huawei mobile phones, representing the highest level of Huawei mobile phones, focuses on business battery life, large screen and high battery life, the birthplace of Huawei's new chips), focusing on business optimization technology (navigation, high-speed rail, data security, etc.), and the target group is middle-aged business people.

2. P series.

The second series, second only to the existence of the Mate series, focuses on business fashion, the main birthplace of Huawei's new technology, if the Mate series is the annual innovation of Huawei's hardware, then the P series is Huawei's annual innovation in software, focusing on camera technology and innovative software technology to attract young people.

3. Nova series.

The photo series, the nova series was released in September 16, targeting the young market, and the body design and performance are all made for young people.

The colorful camera is tall and beautiful, and the performance is not bad for photos. In particular, the high-value appearance accurately captures the consumption psychology of young people.

4. Maimang.

The positioning of the mid-range is too cost-effective, although the recent configuration has gradually gone up, but the CPU is still using the Kirin low-end. The target group is middle-aged conservatives who like the design of large-screen round mobile phones.

5. Enjoy the series.

Huawei low-end, **low, cost-effective, the Enjoy series uses a Snapdragon CPU (such as the Snapdragon 425 used in the Enjoy 7).

HUAWEI mobile phone fast charging settings in**If you set this, you can use a setting in the background of the Huawei mobile phone, and you can set up fast charging after clicking in.

Your Huawei phone's fast charging settings, you can find the battery option through its system settings menu option, and set it from there, normally, it is based on the charging power that your phone charger matches by itself.

In the fast charging settings of Huawei phones, click to enter the settings options of Huawei phones, and set the current fast charging mode in the battery settings, as well as set the current mode.

The charging mode of Huawei mobile phones is fixed, and it does not need to be set by any way, and it is fast charging after the charging head is plugged in by default.

The cough is not in the middle of the battle, it is related to the charger you use, generally you use the original charging head, it uses fast super fast charging, ordinary fast charging, if you use such a charger is relatively slow, it means that your mobile phone does not support, that is to say, your mobile phone does not have the function of fast charging, and now fast charging is a cheap Huawei mobile phone that is only available in particularly expensive mobile phones, and generally does not have this function...

The fast charging function of Huawei mobile phones is set by default in the mobile phone system This is not supported by settings and custom settings, and the mobile phone system automatically recognizes it.

There is no need to set up fast charging for Huawei mobile phones, as long as your charger is fast charging.

For fast charging, you don't need to set it up, as long as you use a fast charger and the corresponding data cable.

Set up fast charging for your phone**Set this, you can set it from the city.

If your phone supports fast charging mode, connect the official standard charger of your Huawei phone to the phone and connect it to enter fast charging mode.

Summary. How to set the charging icon that comes with Huawei phones.

1. Click the settings icon on the desktop of your phone.

2. Click on the Notification option in Settings.

4. The indicator light will flash and turn on when receiving the notification, and the indicator light of the mobile phone will always be on when charging.

Smartphones use lithium batteries. Lithium batteries have no memory effect, so when a new mobile phone is used for the first time, it does not need to be activated by charging and discharging multiple times, and it can be charged as you go.

Pay attention to the following matters in daily use to protect the mobile phone battery and prolong the service life:

1.Use the official standard charger to charge the battery to ensure that the charging voltage is stable and meets the standard, so as to avoid affecting the battery use.

2.Theoretically, keeping the battery in the middle range (e.g. 30%-80%) is more helpful for extending battery life, thus:

After the phone is fully charged, it is recommended that you unplug the charger to avoid charging for a long time or being in a high power state for a long time to accelerate the aging of the battery, so as to prolong the battery life.

If the mobile phone is idle for a long time, it is recommended to turn off the mobile phone and charge it regularly to maintain about 50% of the battery. If the phone is not used or charged for a long time, the battery may trigger over-discharge protection, resulting in abnormal charging or failure to charge.

3.Too high or too low a temperature can affect your phone's battery life, so:

Try to avoid using your phone in low, high, or large temperature differences.

Try to avoid charging and using it for a long time, especially in high-power operation scenarios (such as watching, playing large games, etc.), at this time, the heating of the mobile phone will intensify, and charging and discharging for a long time at high temperatures will accelerate the aging of the battery.

To charge, use the adaptive charger that comes with the Huawei mobile phone, it is best to turn off the mobile phone, connect the charger to the power supply, connect the mobile phone well, and the mobile phone displays charging. Do not disconnect the power supply immediately after the charge is fully charged, charge for about 8 hours in total, and then end the charge.

Generally, you can charge the new mobile phone directly until it is almost gone or red, which is not a lithium battery ......Now the battery can be charged, not so clear, but you can pack it well, keep it charged once a day, and charge it red two or three times a week! I'm just red every day! Keep it once a day.

How to fast charge Huawei, teach you tips so that Huawei phones can also be quickly charged.